An investigation of the prototype germylene addition reaction, GeH2 + C2H4: Time-resolved gas-phase kinetic studies and quantum chemical calculations of the reaction energy surface

文献信息

发布日期 2002-09-10
DOI 10.1039/B206180E
影响因子 3.676
作者

Rosa Becerra, Sergey E. Boganov, Mikhail P. Egorov, Valery I. Faustov, Vladimir M. Promyslov, Oleg M. Nefedov, Robin Walsh


查看原文

摘要

Time resolved studies of germylene, GeH2, generated by laser flash photolysis of 3,4-dimethylgermacyclopentene-3, have been carried out to obtain rate constants for its bimolecular reaction with ethylene, C2H4. The reaction was studied in the gas-phase over the pressure range 1–100 Torr, with SF6 as bath gas, at 5 temperatures in the range 293–555 K. The reaction shows the characteristic pressure dependence of a third-body assisted association reaction. The high pressure rate constants, obtained by extrapolation, gave the Arrhenius equation: log(k∞/cm3 molecule−1 s−1) = (−10.61 ± 0.08) + (5.37 ± 0.56 kJ mol−1)/RT ln10. These Arrhenius parameters are consistent with a fast reaction occurring at approximately half the collision rate at 298 K. RRKM modelling based on a variational transition state, used in combination with a weak collisional deactivation model, gave good fits to the pressure dependent curves for a choice of the critical energy, E0 = 130 kJ mol−1. Quantum chemical calculations (both DFT and ab initio G2//QCISD) of the GeC2H6 potential energy surface (PES), show that GeH2 + C2H4 initially form a π-complex, which can either collapse to germirane or isomerise by a 1,2 H-shift to ethylgermylene with a relatively low barrier. This indicates that the observed pressure dependence must correspond the formation of two products, of which ethylgermylene is the more stable. It also shows that germiranes with 1-H substituents will thermally rearrange to ethylgermylenes with very low barriers. A detailed examination of the PES shows that other potential reaction products are unlikely to be formed. Thermochemical considerations show that germirane is less strained than silirane, and that divalent state stabilisation energies (DSSE) for germylenes are hardly greater than those for silylenes.

相关文献

A chemo- and regio-selective three-component dihydropyrimidinone synthesis

Chris D. Bailey, Chris E. Houlden, Grégory L. J. Bar, Guy C. Lloyd-Jones, Kevin I. Booker-Milburn

2007-06-19 Communication

DOI: 10.1039/B707361E

One-step synthesis of ordered mesoporous carbonaceous spheres by an aerosol-assisted self-assembly

Yan Yan, Fuqiang Zhang, Yan Meng, Bo Tu, Dongyuan Zhao

2007-04-25 Communication

DOI: 10.1039/B702232H

A three-dimensional lanthanide-organic radical open-framework

Nans Roques, Daniel Maspoch, Inhar Imaz, Angela Datcu, Jean-Pascal Sutter, Concepció Rovira, Jaume Veciana

2008-05-08 Communication

DOI: 10.1039/B802196A

A conjugated polyelectrolyte-based fluorescence sensor for pyrophosphate

Xiaoyong Zhao, Yan Liu, Kirk S. Schanze

2007-06-21 Communication

DOI: 10.1039/B706629E

Controlling the formation of 1 out of 64 stereoisomers using organocatalysis

Søren Bertelsen, Rasmus L. Johansen, Karl Anker Jørgensen

2008-06-09 Communication

DOI: 10.1039/B806418K

Copper-free click chemistry for the in situ crosslinking of photodegradable star polymers

Jeremiah A. Johnson, Jeremy M. Baskin, Jeffrey T. Koberstein

2008-04-24 Communication

DOI: 10.1039/B803043J

Transition metal-catalyzed three-component coupling of allenes and the related allylation reactions

Masilamani Jeganmohan, Chien-Hong Cheng

2008-05-15 Feature Article

DOI: 10.1039/B800440D

An expeditious one-step entry to the tetracyclic core of integrastatins

C. V. Ramana, Challa Nageswara Reddy, Rajesh G. Gonnade

2008-05-12 Communication

DOI: 10.1039/B801755G

Valence isomer of a β-diketiminate-supported phosphinidene: a case of C–H activation and ring contraction

Zheng Lu, Michael Findlater, Alan H. Cowley

2007-05-08 Communication

DOI: 10.1039/B704266C

Highly selective 30% hydrogen peroxideoxidation of sulfides to sulfoxides using micromixing

Yoshiro Hirai, Masayuki Kirihara

2008-04-22 Communication

DOI: 10.1039/B802502A

您可能还喜欢

化合物问答

4,5-二甲基-2-硝基苯甲酸(CAS号:4315-14-4)的市场或研究趋势如何?

4,5-二甲基-2-硝基苯甲酸主要应用于制药、染料和农药等行业。由于其潜在的毒性,其市场趋势可能受到法规限制和环保考量的影响,推动了替代产品的研发。在研究领域,...

4315-14-44,5-Dimethyl-2-nitro...
化合物问答

处理直接黑22(CAS号:6473-13-8)时应注意哪些实验室安全事项?

处理直接黑22时应穿戴适当的个人防护装备(PPE),包括实验服、手套、护目镜和口罩。操作应在通风橱内进行,以避免吸入有害气体。如果发生泄漏,应立即清理,并使用大...

6473-13-82-Naphthalenesulfoni...
化合物问答

处理2,1,3-苯并噻二唑-4-基异氰酸酯(CAS号:342411-14-7)时应注意哪些实验室安全事项?

处理2,1,3-苯并噻二唑-4-基异氰酸酯时应注意以下安全事项:穿戴个人防护装备,如实验室外套、防护眼镜和手套;在通风橱中操作,确保良好的通风;保持实验室环境干...

342411-14-74-Isocyanato-2,1,3-b...
化合物问答

如何处理含有Δ-8,9-脱氢雌酮(CAS号:204077-66-7)的废料?

含有Δ-8,9-脱氢雌酮的废料需要进行适当的处理以确保环境和人体安全。首先,收集废液并存放于密封容器中,避免泄漏。其次,可以考虑将其转化为无害物质或通过专业处理...

204077-66-7Thioquinapiperifil d...
化合物问答

如何储存5-溴戊酸(CAS号:2067-33-6)?

5-溴戊酸应储存在阴凉、干燥、通风良好的环境中,避免阳光直射。建议在室温(约15-25°C)下保存,保持相对湿度低于60%。应使用密封的玻璃或塑料容器,并远离热...

2067-33-65-Bromopentanoic aci...
化合物问答

4-(甲基亚磺酰基)苯胺(CAS号:22865-62-9)应用于哪些行业?

4-(甲基亚磺酰基)苯胺在医药、聚合物和传感器等领域有一定的应用。在医药方面,它可以用作合成药物的中间体;在聚合物领域,可以作为合成特殊性能高分子材料的单体;在...

22865-62-94-Methylsulfinylanil...
化合物问答

什么是1-(2-FLUOROPHENYL)-5-METHYL-1H-PYRAZOLE-4-CARBOHYDRAZIDE(CAS号:618092-58-3)?

1-(2-氟苯基)-5-甲基-1H-吡唑-4-亚甲基肼是一种有机化合物,其分子式为C9H9FN3O。该化合物具有特定的物理化学性质,如熔点、沸点等,但具体值需查...

618092-58-31-(2-Fluorophenyl)-5...
化合物问答

Dauricumine(CAS号:345641-00-1)通常如何合成?

Dauricumine通常通过复杂的合成路线制备,涉及多个步骤,包括环化、氧化、卤化等反应。合成过程中使用了多种催化剂和试剂,例如金属催化剂、氧化剂等。产率通常...

345641-00-1(1R,1'S,5R,6'S,8'S)-...
化合物问答

5-氰基苯酞(CAS号:82104-74-3)安全吗?

5-氰基苯酞在正常使用条件下相对安全,但其具有一定的毒性,需谨慎操作。在实验或工业应用中,应采取适当的防护措施,如佩戴防护手套、护目镜和实验服,确保通风良好。误...

82104-74-31-Oxo-1,3-dihydro-2-...
化合物问答

2-Methyl-1-(phenylsulfonyl)-1H-pyrrolo[2,3-b]pyridin-5-amine(CAS号:1186502-59-9)安全吗?

该化合物在使用时需要谨慎操作。虽然其毒性和健康风险尚未完全明确,但建议在通风良好的环境中操作,并穿戴适当的个人防护装备,如手套和防护眼镜。

1186502-59-92-Methyl-1-(phenylsu...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。