Structural characterization of five-component food grade oil-in-water nonionic microemulsions

文献信息

发布日期 2004-02-27
DOI 10.1039/B314625C
影响因子 3.676
作者

L. de Campo, A. Aserin, N. Garti, O. Glatter


查看原文

摘要

The microstructure of a multi-component oil-in-water (O/W) microemulsion, to serve as a microreactor or a solubilization vehicle for food applications, has been studied using small angle scattering X-rays (SAXS) and neutron (SANS) techniques. Significant structural changes along selected aqueous dilution lines in the O/W microemulsions were determined. We found that the droplets’ size is affected by increasing the water content, the oleic phase concentration and content (mixture of R(+)-limonene and ethanol), and the nature of the surfactant (Brij 96v and Tween 60). The micellar size increases with increasing the aqueous phase content in both, Brij 96v-based and Tween 60-based systems. Replacing Brij 96v by Tween 60 at constant weight leads to larger microemulsion droplets. The increase in the surfactant concentration of these systems, as expected, leads to smaller interaction radii and to higher values of the number particle density. Increasing ethanol content in the oleic phase (R(+)-limonene plus ethanol) decreases the effective volume fraction, and causes reduction in the micellar size at decreasing surfactant aggregation number as a result of its redistribution between the interfacial film and the continuous aqueous phase. The SANS investigations allowed a focus on the main effects of propylene glycol (PG) and ethanol (EtOH). Both hydrophilic molecules have similar tuning properties on the microstructure. Both decrease the droplet size, render them more globular, and increase the number of micelles. It was concluded from these results that both alcohols are partially incorporated into the interface (most of it stays in the aqueous phase). The only observed difference in the investigated samples was that upon replacing the aqueous phase partially with PG, the effective volume fractions of the dispersed phase was decreased, while it remained unchanged when it was partially replaced by EtOH. PG and EtOH seem to influence the microstructure independently.

相关文献

A tetraphenylmethane based dendritic tolan–anthracene dyad: synthesis and energy transfer properties

Saumitra Sengupta, Pradipta Purkayastha

2002-12-09 Paper

DOI: 10.1039/B209186K

Tetracyclic pyrazine-fused furazans as insensitive energetic materials: syntheses, structures, and properties

Qi Sun, Xin Li, Qiuhan Lin, Ming Lu

2018-10-11 Communication

DOI: 10.1039/C8OB02155D

Bisubstrate inhibitors for the enzyme catechol-O-methyltransferase (COMT): influence of inhibitor preorganisation and linker length between the two substrate moieties on binding affinity

Christian Lerner, Birgit Masjost, Armin Ruf, Volker Gramlich, Roland Jakob-Roetne, Gerhard Zürcher, Edilio Borroni, François Diederich

2002-11-26 Paper

DOI: 10.1039/B208690P

Dirhodium(ii)-catalyzed ortho C–H amination of sterically congested N,N-dialkylanilines

Motoki Ito, Tomoya Nakagawa, Kazuhiro Higuchi, Shigeo Sugiyama

2018-09-12 Communication

DOI: 10.1039/C8OB01974F

A facile tandem decyanation/cyanation reaction of α-iminonitriles toward cyano-substituted amides

Pei Liang, Botao Liu, Haiqing Luo, Jing Zheng, Xiaowei Wen, Tanggao Liu, Min Ye

2018-10-25 Communication

DOI: 10.1039/C8OB02186D

Resolution of the non-steady-state kinetics of the elimination of HBr from 2-(p-nitrophenyl)ethyl bromide in alcohol/alkoxide media

Kishan L. Handoo, Yun Lu, Yixing Zhao, Vernon D. Parker

2002-11-21 Communication

DOI: 10.1039/B208634D

Epicoccamide, a novel secondary metabolite from a jellyfish-derived culture of Epicoccum purpurascens

Anthony D. Wright, Claudia Osterhage, Gabriele M. König

2003-01-14 Paper

DOI: 10.1039/B208588G

One-pot synthesis of monodisperse dual-functionalized polyethylene glycols through macrocyclic sulfates

Xiaoyan Lv, Xing Zheng, Zhigang Yang, Zhong-Xing Jiang

2018-10-19 Paper

DOI: 10.1039/C8OB02392A

Ester derivatives of hexahomotrioxacalix[3]naphthalenes: conformational and binding properties with alkali metal cations

Muhammad Ashram, Shehadeh Mizyed, Paris E. Georghiou

2003-01-08 Paper

DOI: 10.1039/B209046P

您可能还喜欢

化合物问答

如何储存8-溴-4-羟基-6-(三氟甲氧基)喹啉-3-羧酸乙酯(CAS号:1072944-81-0)?

8-溴-4-羟基-6-(三氟甲氧基)喹啉-3-羧酸乙酯应储存在阴凉、干燥的地方,避免光照和高温。建议使用密封容器进行储存,以防止水分和空气的影响。

1072944-81-0Ethyl 8-bromo-4-hydr...
化合物问答

2,2-二(2-呋喃基)丙烷(CAS号:17920-88-6)的市场或研究趋势如何?

2,2-二(2-呋喃基)丙烷的研究趋势主要集中在新型材料的开发和应用,如高分子材料、有机光电材料等。市场趋势方面,随着环保要求的提高和新材料的应用,该化合物的需...

17920-88-62,2'-(2,2-Propanediy...
化合物问答

如何处理含有螺[呋喃并[3,4-b]吡啶-5(7H),4'-哌啶]-7-酮盐酸盐(CAS号:475152-31-9)的废料?

对于含有螺[呋喃并[3,4-b]吡啶-5(7H),4'-哌啶]-7-酮盐酸盐的废料,应首先进行分类和分离,以减少危险物质的数量。随后,可以考虑通过化学氧化、生物...

475152-31-97H-Spiro[furo[3,4-b]...
化合物问答

Cinnamyl 3-aminobut-2-enoate(CAS号:113898-97-8)安全吗?

Cinnamyl 3-氨基丁-2-烯酸在接触皮肤和眼睛时可能会引起刺激。应避免吸入其粉尘和烟雾。操作时应穿戴适当的个人防护装备,如手套、护目镜和实验室外套。

113898-97-8Cinnamyl 3-aminobut-...
化合物问答

反式-2-十二碳烯二酸(CAS号:6402-36-4)的市场或研究趋势如何?

反式-2-十二碳烯二酸在医药、材料科学等领域有一定的应用,但其市场相对较小。近年来,由于环保意识的提升,对环境友好型化学品的需求增加,研究倾向于开发更绿色的合成...

6402-36-4Traumatic Acid
化合物问答

什么是(9ci)-1H-苯并咪唑-5-乙酸(CAS号:473895-86-2)?

(9ci)-1H-苯并咪唑-5-乙酸是一种含氮杂环化合物,其化学结构为1H-苯并咪唑-5-乙酸。该化合物具有特定的分子式C8H7NO2,属于有机酸类化合物。

473895-86-21H-Benzimidazol-5-yl...
化合物问答

酞菁蓝(CAS号:147-14-8)的主要用途是什么?

酞菁蓝主要用作颜料和染料,广泛应用于塑料、油墨、涂料、纺织品及橡胶工业中。它也用于光敏材料,如太阳能电池和光刻胶。在医疗领域,酞菁蓝因其光敏特性被用于某些光动力...

147-14-8Copper(2+) phthalocy...
化合物问答

5-甲基-1,2,3,4-四氢异喹啉(CAS号:123593-99-7)安全吗?

5-甲基-1,2,3,4-四氢异喹啉在使用和储存时需要谨慎处理。它具有一定的毒性,应避免吸入其蒸气或直接接触皮肤和眼睛。操作此化合物时,建议佩戴防护眼镜、实验服...

123593-99-75-Methyl-1,2,3,4-tet...
化合物问答

如何处理含有3',4',5'-三甲氧基苯乙酮(CAS号:1136-86-3)的废料?

含有3',4',5'-三甲氧基苯乙酮的废液应首先确保其是否为危险废物,根据当地法规确定处理方法。通常,这类有机废液可以采用中和反应降低其pH值,然后通过蒸馏或萃...

1136-86-31-(3,4,5-Trimethoxyp...
化合物问答

如何储存KI-7(CAS号:1489263-00-4)?

KI-7应储存在通风良好的干燥环境中,避免光照和高温。建议使用密封容器储存,并保持在阴凉处。储存温度应控制在室温范围内,一般建议不超过25°C。避免与氧化剂接触...

1489263-00-42-(1-Benzyl-1H-indol...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。