Role of three-body recombination for charge reduction in MALDI process
文献信息
Yiming Lin, Zhibin Yin, Xiaohua Wang, Weifeng Li, Wei Hang
Ions in Matrix-Assisted Laser Desorption/Ionization (MALDI) are predominantly singly charged for small analyte molecules. With the estimated high number density and low temperature of electrons, the three-body recombination mechanism is attractive and should be considered as an important cause for the charge reduction in the plume. Theoretical calculations indicate that the rate coefficient of the three-body recombination is about 50 times higher than that of the two-body recombination if the analyte molecule has insufficient degrees of freedom. Experimental results show that, for small analyte molecules, the ratio of AH22+/AH+ is close to the theoretical 5% value from the three-body recombination modeling and this ratio declines with the increasing electron and matrix molecule number density caused by greater laser irradiance. The ratio of [A + 2]+/[A + 1]+ is higher than the theoretical isotopic value, and the excess [A + 2]+ could exclusively result from the three-body recombination collisions. Further evidence demonstrates that [A + 2]+/[A + 1]+ increases with electron number density, which is in correspondence with the model. All of these theoretical and experimental results indicate that three-body recombination is an essential charge reduction mechanism for small molecules in the MALDI plume.
相关文献
Protonic nanoenvironment engineering for tuning the electrocatalytic efficiency and product selectivity of O2 reduction
Hei Tung Yau, Zuo Hang Yu, Edmund C. M. Tse
DOI: 10.1039/D3QI01756G
“Three in one” 3D mixed skeleton design enables dendrite-free Li metal batteries
Wan-Yue Diao, Dan Xie, Ying-Yu Wang, Fang-Yu Tao, Chang Liu, Wen-Liang Li, Jing-Ping Zhang
DOI: 10.1039/D3QI02243A
Highly selective photothermal conversion of CO2 to ethylene using hierarchical boxwood ball-like Weyl semimetal WTe2 catalysts
Xiaoyue Zhang, Chaoran Dong, Yong Yang, Yingjie Hu, Lizhi Wu, Yu Gu, Kan Zhang, Jinyou Shen
DOI: 10.1039/D3TA06389E
Rational design of ZIF-derived nanocarbon with dual metal active sites via molten salt strategy for advancing oxygen electrocatalysis
Sakshi Bhardwaj, Tribani Boruah, Ramendra Sundar Dey
DOI: 10.1039/D3QI01700A
Improving detection thresholds and robust event filtering in single-particle and single-cell ICP-MS analysis
Matthias Elinkmann, Sarah Reuter, Michael Holtkamp, Steffen Heuckeroth, Alexander Köhrer, Katharina Kronenberg, Michael Sperling, Oliver Rubner, C. Derrick Quarles, Jr, Michael Hippler, Uwe Karst
DOI: 10.1039/D3JA00292F
Performance enhancement of inverted perovskite solar cells using a GlyHCl additive
Haiyang Cheng, Jing Zhuang, Jiupeng Cao, Tianyue Wang
DOI: 10.1039/D3TA06539A
Fe, S-uniformly dispersed Ni MOFs based on FeS substrate precipitation-dissolution equilibrium for water and seawater oxidation
Na Xu, Fu-Li Wang, Jun-Qi Han, Wen-Li Yu, Wen-Jing Li, Yi-Chuan Li, Yu-Lu Zhou, Yong-Ming Chai, Bin Dong
DOI: 10.1039/D3QI01975F
您可能还喜欢
什么是2,6-二溴-4,8-双[(2-乙基己基)氧基]苯并[1,2-b:4,5-b']二噻吩(CAS号:1226782-13-3)?
2,6-二溴-4,8-双[(2-乙基己基)氧基]苯并[1,2-b:4,5-b']二噻吩是一种有机化合物,分子式为C23H32Br2O2S2。该化合物具有芳香性和...
木聚硫钠(CAS号:37319-17-8)的物理化学性质是什么?
木聚硫钠通常为无色或白色结晶性粉末,具有吸湿性。其分子量约为121.11 g/mol。木聚硫钠易溶于水,不溶于醇类和其他非极性溶剂。在酸性或碱性溶液中,木聚硫钠...
2-甲氧基-4-(三氟甲基)苄溴, JRD(CAS号:886500-59-0)适用哪些法规指南?
该化合物在合成、储存和运输过程中需遵循《全球化学品统一分类和标签制度》(GHS)的健康、环境和物理危险分类。在欧洲还需符合《化学品注册、评估、授权和限制》(RE...
1,4-Diazoniabicyclo[2.2.2]octane-1,4-disulfinate(CAS号:119752-83-9)的主要用途是什么?
1,4-二氮杂双环[2.2.2]辛烷-1,4-二硫酸二酯主要用于有机合成中的保护基团,特别是在保护胺基和硫醇基方面具有广泛应用。此外,它还用于一些特殊化学反应的...
如何处理含有4-(Bromomethyl)-2-fluorobenzenesulphonamide(CAS号:1645275-47-3)的废料?
含有4-(Bromomethyl)-2-fluorobenzenesulphonamide的废液应首先进行中和处理,以降低pH值,避免对环境造成腐蚀性影响。随后...
Loureiriol(CAS号:479195-44-3)的物理化学性质是什么?
Loureiriol是一种天然化合物,其分子式为C15H22O4。Loureiriol为无色结晶性粉末,具有较高的熔点和良好的热稳定性。其相对分子质量为262....
在合成中是否有3-氨基苯甲酰苯胺(CAS号:14315-16-3)的替代品?
在合成过程中,可以考虑使用类似结构的化合物作为3-氨基苯甲酰苯胺的替代品,例如N-苯基-3-氰基苯胺或N-苯基-3-硝基苯胺等,这些化合物具有相似的化学性质,可...
4-异氰酰苯基硼酸频哪醇酯(CAS号:380430-64-8)的市场或研究趋势如何?
4-异氰酰苯基硼酸频哪醇酯主要应用于有机合成、药物化学和材料科学领域。随着绿色化学的发展,该化合物因其高效的官能团转化能力和环境友好性而受到越来越多的关注。近年...
如何储存3β-乙酰氧基-7,25-甘遂二烯-24(R)-醇(CAS号:1352001-09-2)?
3β-乙酰氧基-7,25-甘遂二烯-24(R)-醇应储存在阴凉、干燥、通风良好的地方,避免直接光照。储存容器应密封,防止空气中的水分和氧气影响化合物的稳定性。建...
如何储存4-氟-2-甲基-1H-吲哚(CAS号:1260383-51-4)?
应将4-氟-2-甲基-1H-吲哚存放在阴凉、干燥、通风良好的地方,避免直接暴露在光照下。容器应密封,避免与空气中的水蒸气接触。建议在避光、温度不超过25℃的环境...
来源期刊
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.














