Highly active, water-compatible and easily separable magnetic mesoporous Lewis acid catalyst for the Mukaiyama–Aldol reaction in water
文献信息
Fang Zhang, Xiaotao Wu, Chao Liang, Xiaoyan Li, Zhen Wang, Hexing Li
A novel magnetic mesoporous Lewis acid catalyst was prepared through immobilizing Yb(OTf)3 on a sodium propylsulphonate and phenyl group co-functionalized magnetic core–mesoporous silica shell composite. The obtained Yb(OTf)2-SO3Na&Ph-MCMSS catalyst had a typical core–shell structure with a Fe3O4 magnetic core, a middle amorphous silica layer and a multifunctional mesoporous silica shell with radial pore channels. In water medium Mukaiyama–Aldol reactions, it exhibited a higher catalytic reactivity than that of the homogeneous catalyst Yb(OTf)3, and control catalysts Yb(OTf)2-SO3Na-MCMSS without phenyl groups inside the mesoporous channels, Yb(OTf)2-SO3Na&Ph-MCSS without a mesoporous structure, mesoporous Yb(OTf)2-SO3Na&Ph-MCM-41 with an irregular morphology and nonporous Yb(OTf)2-SO3Na-Amberlyst-15 ion-exchange resin. The systematic analysis demonstrated that this excellent catalytic performance could be attributed to the synergetic effect resulting from its radial mesoporous channels and the pore surface hydrophobicity, leading to the increased accessibility of actives sites and the decreased diffusion limitation of reactants. More importantly, this catalyst was stable in water and could be easily separated with a simple magnet and reused at least six times without loss of catalytic activity.
相关文献
Iodineoxidation by hydrogen peroxide and Bray–Liebhafsky oscillating reaction: effect of the temperature
Guy Schmitz
DOI: 10.1039/C1CP00006C
New electron correlation theories for transition metal chemistry
Konrad H. Marti, Markus Reiher
DOI: 10.1039/C0CP01883J
Competition between covalent and noncovalent bond cleavages in dissociation of phosphopeptide-amine complexes
Julia Laskin, Zhibo Yang, Amina S. Woods
DOI: 10.1039/C1CP00029B
Fuel-specific influences on the composition of reaction intermediates in premixed flames of three C5H10O2 ester isomers
Bin Yang, Charles K. Westbrook, Terrill A. Cool, Nils Hansen, Katharina Kohse-Höinghaus
DOI: 10.1039/C0CP02065F
Solvent-assisted conformational isomerization and the conformationally-pure REMPI spectrum of 3-aminophenol
Woon Yong Sohn, Minho Kim, Sang-Su Kim, Young Dong Park, Hyuk Kang
DOI: 10.1039/C0CP02592E
Quantum control by means of Hamiltonian structure manipulation
DOI: 10.1039/C0CP02234A
Extending the molecular size in accurate quantum-chemical calculations: the equilibrium structure and spectroscopic properties of uracil
Cristina Puzzarini, Vincenzo Barone
DOI: 10.1039/C0CP02636K
Ground and excited state communication within a ruthenium containing benzimidazole metallopolymer
Emmet J. O'Reilly, Lynn Dennany, Darren Griffith, Francois Moser, Tia E. Keyes, Robert J. Forster
DOI: 10.1039/C0CP02638G
New insights into diffusion in 3D crowded media by Monte Carlo simulations: effect of size, mobility and spatial distribution of obstacles
Eudald Vilaseca, Adriana Isvoran, Sergio Madurga, Isabel Pastor, Josep Lluís Garcés, Francesc Mas
DOI: 10.1039/C0CP01218A
On the direct scavenging activity of melatonin towards hydroxyl and a series of peroxyl radicals
Annia Galano
DOI: 10.1039/C0CP02801K
您可能还喜欢
N-2,2-丙烯基-2-丙烯酰胺(CAS号:2555-13-7)通常如何合成?
N-2,2-丙烯基-2-丙烯酰胺通常通过丙烯酰胺与丙烯基卤化物的缩合反应合成。该反应通常在温和的条件下进行,使用适量的碱如吡啶作为催化剂。反应的选择性良好,产率...
什么是1,2-二碘四氟代乙烷(CAS号:354-65-4)?
1,2-二碘四氟代乙烷是一种有机化合物,化学式为C2F4I2,CAS号为354-65-4。它是一种无色透明液体,具有特殊的化学性质和物理性质,包括高沸点、低挥发...
3-溴-1H-吡咯[3,2-c]吡啶-4-碳腈(CAS号:1000341-71-8)适用哪些法规指南?
根据GHS(全球化学品统一分类和标签制度),3-溴-1H-吡咯[3,2-c]吡啶-4-碳腈被归类为第2类易燃液体。在欧盟,该化合物需要符合REACH法规的要求,...
1-氯甲基萘磺酸(CAS号:87491-79-0)安全吗?
1-氯甲基萘磺酸在使用时需要谨慎,因为它具有一定的刺激性和腐蚀性。操作时应佩戴适当的防护装备,如防化服、手套、护目镜等,避免直接接触皮肤和吸入其蒸汽。
二氯(二环戊二烯)铂(CAS号:12083-92-0)的主要用途是什么?
该化合物主要用于催化剂领域,特别是在有机合成中的催化氧化反应以及作为某些药物合成的中间体。此外,它还被研究用于纳米材料的制备。
3-溴-7-氯噻吩并[3,2-b]吡啶-6-甲腈(CAS号:798574-82-0)安全吗?
3-溴-7-氯噻吩并[3,2-b]吡啶-6-甲腈在处理时需要谨慎,因其含有溴和氯等强卤素,可能具有一定的刺激性和腐蚀性。使用时应佩戴适当的个人防护装备,避免皮肤...
(R)-1-((R)-2-(2’-二环己基膦苯基)三戊铁基]乙基(双-3,5-三氟甲基苯基)膦(CAS号:494227-32-6)的主要用途是什么?
该化合物主要用于有机合成领域,特别是作为催化剂或配体,在有机合成反应中发挥重要作用。此外,它还可能应用于催化加氢反应、偶联反应等。
3-[6-(Diphenylphosphoryl)-2-naphthyl]-1,10-phenanthroline(CAS号:1480371-38-7)安全吗?
3-[6-(Diphenylphosphoryl)-2-naphthyl]-1,10-phenanthroline在正常使用条件下相对安全,但在操作时应穿戴适当...
在合成中是否有ETHYL 2-(4-(4,4,5,5-TETRAMETHYL-1,3,2-DIOXABOROLAN-2-YL)CYCLOHEX-3-ENYL)ACETATE(CAS号:1166829-70-4)的替代品?
可以考虑使用类似结构的化合物作为替代品,如2-(4-环戊基环己烯基)乙酸酯,这种化合物在结构上相似,可能在某些合成路径中作为替代品。
如何处理含有3-(3-氨基丙基)丙酮缩甘油(CAS号:131606-42-3)的废料?
处理含有3-(3-氨基丙基)丙酮缩甘油的废料时,首先应确保遵守当地的环保法规。对于危险废物,应进行分类收集,然后送至专业的废物处理设施进行焚烧或安全填埋。在处理...
来源期刊
Green Chemistry

Green Chemistry provides a unique forum for the publication of innovative research on the development of alternative green and sustainable technologies. The scope of Green Chemistry is based on, but not limited to, the definition proposed by Anastas and Warner (Green Chemistry: Theory and Practice, P T Anastas and J C Warner, Oxford University Press, Oxford, 1998). Green chemistry is the utilisation of a set of principles that reduces or eliminates the use or generation of hazardous substances in the design, manufacture and application of chemical products. Green Chemistry is at the frontiers of this continuously-evolving interdisciplinary science and publishes research that attempts to reduce the environmental impact of the chemical enterprise by developing a technology base that is inherently non-toxic to living things and the environment. Submissions on all aspects of research relating to the endeavour are welcome. The journal publishes original and significant cutting-edge research that is likely to be of wide general appeal. To be published, work must present a significant advance in green chemistry. Papers must contain a comparison with existing methods and demonstrate advantages over those methods before publication can be considered. For more information please see this Editorial. Coverage includes the following, but is not limited to: Design (e.g. biomimicry, design for degradation/recycling/reduced toxicity…) Reagents & Feedstocks (e.g. renewables, CO2, solvents, auxiliary agents, waste utilization…) Synthesis (e.g. organic, inorganic, synthetic biology…) Catalysis (e.g. homogeneous, heterogeneous, enzyme, whole cell…) Process (e.g. process design, intensification, separations, recycling, efficiency…) Energy (e.g. renewable energy, fuels, photovoltaics, fuel cells, energy storage, energy carriers…) Applications (e.g. electronics, dyes, consumer products, coatings, pharmaceuticals, preservatives, building materials, chemicals for industry/agriculture/mining…) Impact (e.g. safety, metrics, LCA, sustainability, (eco)toxicology…) Green chemistry is, by definition, a continuously-evolving frontier. Therefore, the inclusion of a particular material or technology does not, of itself, guarantee that a paper is suitable for the journal. To be suitable, the novel advance should have the potential for reduced environmental impact relative to the state of the art. Green Chemistry does not normally deal with research associated with 'end-of-pipe' or remediation issues.












![trans-2-{[(Tert-butoxy)carbonyl]amino}cyclobutane-1-carboxylic acid structure trans-2-{[(Tert-butoxy)carbonyl]amino}cyclobutane-1-carboxylic acid structure](https://cnstatic.chemtradehub.com/structs/951/951173-25-4-27cd.webp)
![1H-Imidazo[4,5-c]pyridine-7-carboxylic acid structure 1H-Imidazo[4,5-c]pyridine-7-carboxylic acid structure](https://cnstatic.chemtradehub.com/structs/123/1234616-39-7-1344.webp)
![(1R,6R)-6-({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)-3-cyclohexene-1-carboxylic acid structure (1R,6R)-6-({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)-3-cyclohexene-1-carboxylic acid structure](https://cnstatic.chemtradehub.com/structs/865/865689-24-3-5fef.webp)