Microsolvation of the pyrrole cation (Py+) with nonpolar and polar ligands: infrared spectra of Py+–Ln with L = Ar, N2, and H2O (n ≤ 3)
文献信息
Markus Schütz, Yoshiteru Matsumoto, Aude Bouchet, Murat Öztürk, Otto Dopfer
The solvation of aromatic (bio-)molecular building blocks has a strong impact on the intermolecular interactions and function of supramolecular assemblies, proteins, and DNA. Herein we characterize the initial microsolvation process of the heterocyclic aromatic pyrrole cation (Py+) in its 2A2 ground electronic state with nonpolar, quadrupolar, and dipolar ligands (L = Ar, N2, and H2O) by infrared photodissociation (IRPD) spectroscopy of cold mass-selected Py+–Ln (n ≤ 3) clusters in a molecular beam and dispersion-corrected density functional theory calculations at the B3LYP-D3/aug-cc-pVTZ level. Size- and isomer-specific shifts in the NH stretch frequency (ΔνNH) unravel the competition between various ligand binding sites, the strength of the respective intermolecular bonds, and the cluster growth. In Py+–Ar, linear H-bonding of Ar to the acidic NH group (NH⋯Ar) is competitive with π-stacking to the aromatic ring, and both Py+–Ar(H) and Py+–Ar(π) are observed. For L = N2 and H2O, the linear NH⋯L H-bond is much more stable than any other binding site and the only observed binding motif. For the Py+–Ar2 and Py+–(N2)2 trimers, the H/π isomer with one H-bonded and one π-bonded ligand strongly competes with a 2H isomer with two bifurcated nonlinear NH⋯L bonds. The latter are equivalent for Ar but nonequivalent for N2. Py+–H2O exhibits a strong and linear NH⋯O H-bond with charge-dipole configuration and C2v symmetry. IRPD spectra of cold Py+–H2O–L clusters with L = Ar and N2 reveal that Ar prefers π-stacking to the Py+ ring, while N2 forms an OH⋯N2 H-bond to the H2O ligand. The ΔνNH frequency shifts in Py+–Ln are correlated with the strength of the NH⋯L H-bond and the proton affinity (PA) of L, and a monotonic correlation between ΔνNH of the Py+–L(H) dimers and PA is established. Comparison with neutral Py–L dimers reveals the strong impact of the positive charge on the acidity of the NH group, the strength of the NH⋯L H-bond, and the preferred ligand binding motif.
期刊推荐

Herald of the Russian Academy of Sciences

Chinese Journal of Chemistry

Heteroatom Chemistry

Bioorganic & Medicinal Chemistry

Polycyclic Aromatic Compounds

Acta Metallurgica Sinica-English Letters

Biocatalysis and Biotransformation

Topics in Catalysis

Journal of Asian Natural Products Research

Medicinal Chemistry Research
相关文献
Exploitation of a simple Schiff base as a ratiometric and colorimetric chemosensor for glutamic acid
Anupam Ghorai, Jahangir Mondal, Rukmani Chandra, Goutam K. Patra
DOI: 10.1039/C5AY01465D
A portable, disposable, and low-cost optode for sulphide and thiol detection
Giancarla Alberti, Valeria M. Nurchi, Lisa R. Magnaghi, Raffaela Biesuz
DOI: 10.1039/C9AY01538H
On-surface synthesis of polyazulene with 2,6-connectivity
Qiang Sun, Ian Cheng-Yi Hou, Kristjan Eimre, Carlo A. Pignedoli, Pascal Ruffieux
DOI: 10.1039/C9CC07168G
Incorporation of thermal gels for facile microfluidic transient isotachophoresis
Jordan B. Burton, Cassandra L. Ward, David M. Klemet, Thomas H. Linz
DOI: 10.1039/C9AY01384A
Fluorescence-quenching CdTe quantum dots applied for identification of cocaine-structure analogues
Jacqueline Q. Alves, Lilian P. Franco, Marcelo F. de Oliveira
DOI: 10.1039/C8AY02243G
Detection of degraded, adulterated, and falsified ceftriaxone using paper analytical devices
Sarah L. Bliese, Mercy Maina, Phelix Were, Marya Lieberman
DOI: 10.1039/C9AY01489F
Borylated oximes: versatile building blocks for organic synthesis
Sean K. Liew, Aleksandra Holownia, Diego B. Diaz, Philip A. Cistrone, Philip E. Dawson, Andrei K. Yudin
DOI: 10.1039/C7CC06579E
Detection of Fe3+ using a novel hyperbranched polymeric spectral sensor
Wenbo Guo, Tengxuan Tang, Shenzhou Lu, Dongmei Xu
DOI: 10.1039/C9AY01483G
您可能还喜欢
硅烷偶联剂ZQ-172(CAS号:1067-53-4)的主要用途是什么?
硅烷偶联剂ZQ-172主要用于增强无机填料与有机高分子材料之间的相容性,常见于橡胶、塑料、涂料和胶黏剂等复合体系中。其硅氧烷基团可与玻璃纤维、二氧化硅等无机物表...
如何处理含有6-(2,4-二甲氧基苯基)-2-吡啶甲醇(CAS号:887981-31-9)的废料?
对于含有该化合物的废料,首先应收集并分类存放,避免与其它化学品混合。在处理前,需进行必要的检测,确定其含量和性质。随后,可以采用化学氧化、生物降解或物理吸附等方...
甲砜霉素甘氨酸酯盐酸盐(CAS号:2611-61-2)的物理化学性质是什么?
该化合物为白色或类白色结晶性粉末,不溶于水,溶于乙醇和氯仿。分子量为403.03 g/mol。它具有手性,含有三个手性中心,分别为2S,3R构型。该化合物在酸性...
如何储存反式-环丙烷-1,2-二胺双盐酸盐(CAS号:3187-76-6)?
反式-环丙烷-1,2-二胺双盐酸盐应存放在阴凉、干燥且通风良好的地方,避免阳光直射。储存容器应密封,以防挥发和受潮。同时,应远离火源和热源,确保储存环境温度不超...
什么是吩嗪硫酸甲酯(CAS号:299-11-6)?
吩嗪硫酸甲酯是一种有机化合物,化学结构由吩嗪环与甲酯基团构成,分子式为C10H9N2SO4。其为吩嗪类衍生物,具有典型的芳香环结构和酯基官能团,常作为氧化剂或染...
N1-异丙基二乙烯三胺(CAS号:207399-20-0)的市场或研究趋势如何?
随着绿色化学和环保意识的提高,N1-异丙基二乙烯三胺的研究趋势正向低毒、环保的方向发展。市场趋势方面,由于其在功能性材料、药物合成等领域的需求,预计其市场需求将...
4,4-Dimethyl-5,6-dihydro-4H-cyclopenta[d][1,3]thiazol-2-amine(CAS号:1182284-47-4)应用于哪些行业?
该化合物在医药、聚合物、传感器和半导体领域有潜在的应用。在医药领域,作为一种新型的噻唑类化合物,它可能具有抗炎、抗病毒等生物活性。在聚合物领域,该化合物可用作增...
处理5-(PYRIDIN-4-YL)-OXAZOL-2-YLAMINE(CAS号:1014629-83-4)时应注意哪些实验室安全事项?
在处理5-(吡啶-4-基)-2-氧代-1-氧杂环己烷-3-胺时,应佩戴防护眼镜、手套和防护服。实验应在通风橱中进行,以避免吸入有害气体。如果发生泄露,应立即用大...
什么是伊托必利N-氧化物(CAS号:141996-98-7)?
伊托必利N-氧化物是一种化学化合物,其分子结构是伊托必利的N位进行氧化处理后的产物。它具有一定的生物活性,主要用于药物研究和开发。
氟氯烟酸(CAS号:82671-06-5)安全吗?
氟氯烟酸属于有机氯化物,具有一定的毒性,需谨慎处理。在操作过程中,应佩戴防护手套、护目镜和实验服,避免吸入其粉尘或蒸汽。接触皮肤或眼睛可能导致刺激,应采取适当的...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.




