Evaluation of a cooling/heating-assisted microextraction instrument using a needle trap device packed with aminosilica/graphene oxide nanocomposites, covalently attached to cotton
文献信息
A. R. Ghiasvand, N. Heidari, S. Abdolhosseini, A. Hamdi, P. R. Haddad
A low-cost and reliable cooling/heating-assisted microextraction (CHaME) instrument was designed and fabricated for use in different modes of microextraction methods. The CHaME setup is able to cool down the sorbent and simultaneously heat the sample in a wide temperature range. Consequently, it can create a large thermal gap between the sorbent and the sample matrix, to promote the release of analytes from the sample tissue and enhance their effective trapping on the microextraction phase. The primary versions of the instrument have previously been evaluated, coupled with different modes of solid- and liquid-phase microextraction strategies. Compared with conventional microextraction systems, it is able to extract volatile organic compounds from complicated solid matrices more effectively, rapidly and without any need for a sample preparation step. In this research, the final and compact version of the CHaME instrument was fabricated and employed in a cooling/heating-assisted needle trap device (CHaME-NTD) for microextraction of polycyclic aromatic hydrocarbons (PAHs) in contaminated soil samples, prior to GC-FID determination. An aminosilica/graphene oxide nanocomposite was synthesized, covalently attached to cotton (Am-Si/GO/Cot), packed inside a needle, and applied as an effective sorbent for trapping of the analytes. The influence of experimental parameters on the extraction efficiency of the TC-NTD-GC-FID strategy was evaluated and optimized. Under the optimal conditions, linear dynamic ranges (LDRs), limits of detection (LODs), and relative standard deviations (RSDs) for the PAHs were 0.001–2.0 μg g−1, 5–38 pg g−1, and 6.2–9.8% (n = 6), respectively. The CHaME-NTD-GC-FID procedure was compared with the traditional NTD-GC-FID method. Additionally, the Am-Si/GO/Cot nanocomposite sorbent was compared with the most frequently used commercial sorbents. The results demonstrated the remarkable performance of the CHaME-NTD procedure and the Am-Si/GO/Cot composite sorbent. The developed setup was also used for the extraction and determination of PAHs in contaminated soil samples, through the CHaME-NTD-GC-FID procedure.
相关文献
Semiconductor and ceramic nanoparticle films deposited by chemical bath deposition
DOI: 10.1039/B616684A
On the σ,π-energy separation of the aromatic stabilization energy of cyclobutadiene
Georg Hohlneicher, Lars Packschies, Johannes Weber
DOI: 10.1039/B700914N
Layer-by-layer assembly as a versatile bottom-up nanofabrication technique for exploratory research and realistic application
Katsuhiko Ariga, Jonathan P. Hill, Qingmin Ji
DOI: 10.1039/B700410A
New theoretical investigations of the photodissociation of ozone in the Hartley, Huggins, Chappuis, and Wulf bands
S. Yu. Grebenshchikov, Z.-W. Qu, H. Zhu, R. Schinke
DOI: 10.1039/B701020F
Taxonomy of periodic nets and the design of materials
Olaf Delgado-Friedrichs, Michael O’Keeffe, Omar M. Yaghi
DOI: 10.1039/B615006C
Ultrafast excited state dynamics in protonated GWG and GYG tripeptides
G. Grégoire, C. Dedonder-Lardeux, C. Jouvet, C. Desfrançois, J. A. Fayeton
DOI: 10.1039/B613585D
Spectroscopy and potential energy surface of the H2–CO2 van der Waals complex: experimental and theoretical studies‡
A. R. W. McKellar, Dong H. Zhang
DOI: 10.1039/B614849B
Inelastic insights for molecular tunneling pathways: Bypassing the terminal groups
Alessandro Troisi, Mark A. Ratner
DOI: 10.1039/B702377D
您可能还喜欢
(5-氨基吡唑-3-基)乙酸(CAS号:174891-10-2)的物理化学性质是什么?
(5-氨基吡唑-3-基)乙酸是一种无色至白色固体,分子量为174.15 g/mol。它在水中具有较好的溶解性,在有机溶剂中的溶解度较低。该化合物具有较好的反应活...
3-氟-4,5-二氯苯胺(CAS号:35754-38-2)适用哪些法规指南?
3-氟-4,5-二氯苯胺受到多项法规指南的约束,包括但不限于GHS(全球化学品统一分类和标签制度)的危险分类标准、欧盟的REACH法规(注册、评估、授权和限制)...
什么是(R)-(+)-2,2',6,6'-四甲氧基-4,4'-联(二(3,5-二甲苯基基)膦基)-3,3'-二联吡啶(CAS号:442905-33-1)?
这是一种有机化合物,化学名为(R)-(+)-2,2',6,6'-四甲氧基-4,4'-联(二(3,5-二甲苯基基)膦基)-3,3'-二联吡啶,CAS号为44290...
1-氨基-2-氰基萘(CAS号:3100-67-2)应用于哪些行业?
1-氨基-2-氰基萘在医药、聚合物、传感器和半导体等行业中有应用。在医药领域,它可用作中间体合成某些药物。在聚合物行业,它可以用于制备具有特定性能的聚合物。此外...
如何处理含有1-溴-4-(异丙氧基甲基)苯(CAS号:98446-84-5)的废料?
处理含1-溴-4-(异丙氧基甲基)苯的废料时,首先应确保废液收集在防渗漏的容器中,避免泄露。然后,可以考虑采用化学降解法或物理吸附法进行处理。在特定条件下,可通...
6-Chloro-8-(trifluoromethyl)chroman-4-one(CAS号:1344889-75-3)的主要用途是什么?
6-氯-8-三氟甲基-2,3-二氢-4H-色喃-4-酮主要用于有机合成中的中间体,也可作为研究试剂使用。
7-乙氧基-2-萘酚(CAS号:57944-44-2)通常如何合成?
7-乙氧基-2-萘酚通常通过N-乙氧基化反应合成,首先将2-萘酚与乙醇钠在乙醇中反应生成7-乙氧基-2-萘酚钠盐,再通过酸化进一步得到7-乙氧基-2-萘酚。该合...
4-(1,1-二氧硫代吗啉)丁醇(CAS号:59801-41-1)适用哪些法规指南?
该化合物需遵循一系列的法规指南,包括但不限于GHS全球统一分类和标签制度,其分类可能包括易燃液体和可能危害水生环境。在欧洲,还需遵循REACH法规,确保物质和混...
4-甲氧基苄基叠氮甲酸酯(CAS号:25474-85-5)的物理化学性质是什么?
4-甲氧基苄基叠氮甲酸酯是一种无色液体,具有一定的挥发性。其分子量为198.16,熔点为-69°C,沸点为105°C。该化合物在水中溶解度较低,在有机溶剂如乙醇...
如何处理含有4-氯-2-氟嘧啶(CAS号:51422-00-5)的废料?
含有4-氯-2-氟嘧啶的废料应按照危险废物处理。首先,应收集并分类这些废料,避免与其他废物混合。然后,可以采用焚烧处理或者交由专业机构进行处置。在处理过程中,需...
来源期刊
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.












![N-{15-[(2,5-Dioxo-1-pyrrolidinyl)oxy]-15-oxo-3,6,9,12-tetraoxapentadec-1-yl}-2-(2-propyn-1-yloxy)acetamide structure N-{15-[(2,5-Dioxo-1-pyrrolidinyl)oxy]-15-oxo-3,6,9,12-tetraoxapentadec-1-yl}-2-(2-propyn-1-yloxy)acetamide structure](https://cnstatic.chemtradehub.com/structs/210/2101206-92-0-2eb5.webp)
![1-(1-Benzyl-1,2,3,6-tetrahydropyridin-4-yl)-1H-benzo[d]imidazol-2(3H)-one structure 1-(1-Benzyl-1,2,3,6-tetrahydropyridin-4-yl)-1H-benzo[d]imidazol-2(3H)-one structure](https://cnstatic.chemtradehub.com/structs/603/60373-71-9-7dfb.webp)
![5'-Fluoro-[2,3'-biindolinylidene]-2',3-dione structure 5'-Fluoro-[2,3'-biindolinylidene]-2',3-dione structure](https://cnstatic.chemtradehub.com/structs/251/251903-00-1-9cb1.webp)