A differential extended gate-AlGaN/GaN HEMT sensor for real-time detection of ionic pollutants
文献信息
Bin Miao, Jian Zhang, Bin Zeng, Jiadong Li
In this study, we propose a differential extended gate (DEG)-AlGaN/GaN high electron mobility transistor (HEMT) sensor to detect ionic pollutants in solution. The DEG-AlGaN/GaN HEMT sensor consists of two extended gate sensing units, which combine the differential method with the extended gate structure. Ionic pollutant Fe3+ is used to test the feasibility of the device. Compared to the conventional AlGaN/GaN HEMT sensor, DEG-AlGaN/GaN HEMT sensors can effectively reduce the effect of noise factors and successfully improve the detection limit to 10 fM. At the same time, the DEG sensor shows that Fe3+ can be detected in a wide range of concentrations, varying from 10 fM to 100 μM, and it shows better linearity (R2 = 0.9955) than the conventional AlGaN/GaN HEMT sensor. These results demonstrate that the unique DEG design can overcome the drawbacks of the conventional AlGaN/GaN HEMT sensor, and significantly improve the overall performance of the AlGaN/GaN HEMT sensor. As a result, this novel sensor has the potential to be a real-time and high-performance test tool for environmental monitoring.
期刊推荐
相关文献
Laser spectroscopy of YBr: rotational analysis of the C1Σ–X1Σ system
J. W-H. Leung, Jinghua Dai, Xianghuai Wang, A. S-C. Cheung
DOI: 10.1039/B105895A
Photodissociation of DOBr—Time-dependent wavepacket calculations
Alex Brown, Gabriel G. Balint-Kurti, László Füsti-Molnár
DOI: 10.1039/B102542M
Hydrogen effects in hexane reactions over Al2O3 supported Pt, Ir and Pt–Ir catalysts
DOI: 10.1039/A902976A
Basis set effect on hydrogen bond stabilization energy estimation of the Watson–Crick type nucleic acid base pairs using medium-size basis sets: single point MP2 evaluations at the HF optimized structures
Shun-ichi Kawahara, Tadafumi Uchimaru
DOI: 10.1039/B001507P
Hydride shift in substituted phenyl glyoxals: Interpretation of experimental rate data using electronic structure and variational transition state theory calculations
Gary Tresadern, Julie Willis, Ian H. Hillier, C. Ian F. Watt
DOI: 10.1039/B102330F
Diblock polyampholytes at the silicon/water interface: Adsorption at various modified silicon substrates
Boris Mahltig, Robert Jérôme, Manfred Stamm
DOI: 10.1039/B104237H
Shock tube combustion of liquid hydrocarbon sprays of toluene
DOI: 10.1039/B101803P
Adsorption and photochemistry of CH3CN and CH3CONH2 on powdered TiO2
Chih-Chung Chuang, Wen-Chun Wu, Ming-Xi Lee, Jong-Liang Lin
DOI: 10.1039/B003227L
C6h-Hexa-azahexaborine, [(CH)BN]6: structure and magnetic properties of a proposed 18-electron aromatic ring
A. Soncini, P. W. Fowler, I. Černušak, E. Steiner
DOI: 10.1039/B103929F
您可能还喜欢
硅烷偶联剂ZQ-172(CAS号:1067-53-4)的主要用途是什么?
硅烷偶联剂ZQ-172主要用于增强无机填料与有机高分子材料之间的相容性,常见于橡胶、塑料、涂料和胶黏剂等复合体系中。其硅氧烷基团可与玻璃纤维、二氧化硅等无机物表...
如何处理含有6-(2,4-二甲氧基苯基)-2-吡啶甲醇(CAS号:887981-31-9)的废料?
对于含有该化合物的废料,首先应收集并分类存放,避免与其它化学品混合。在处理前,需进行必要的检测,确定其含量和性质。随后,可以采用化学氧化、生物降解或物理吸附等方...
甲砜霉素甘氨酸酯盐酸盐(CAS号:2611-61-2)的物理化学性质是什么?
该化合物为白色或类白色结晶性粉末,不溶于水,溶于乙醇和氯仿。分子量为403.03 g/mol。它具有手性,含有三个手性中心,分别为2S,3R构型。该化合物在酸性...
如何储存反式-环丙烷-1,2-二胺双盐酸盐(CAS号:3187-76-6)?
反式-环丙烷-1,2-二胺双盐酸盐应存放在阴凉、干燥且通风良好的地方,避免阳光直射。储存容器应密封,以防挥发和受潮。同时,应远离火源和热源,确保储存环境温度不超...
什么是吩嗪硫酸甲酯(CAS号:299-11-6)?
吩嗪硫酸甲酯是一种有机化合物,化学结构由吩嗪环与甲酯基团构成,分子式为C10H9N2SO4。其为吩嗪类衍生物,具有典型的芳香环结构和酯基官能团,常作为氧化剂或染...
N1-异丙基二乙烯三胺(CAS号:207399-20-0)的市场或研究趋势如何?
随着绿色化学和环保意识的提高,N1-异丙基二乙烯三胺的研究趋势正向低毒、环保的方向发展。市场趋势方面,由于其在功能性材料、药物合成等领域的需求,预计其市场需求将...
4,4-Dimethyl-5,6-dihydro-4H-cyclopenta[d][1,3]thiazol-2-amine(CAS号:1182284-47-4)应用于哪些行业?
该化合物在医药、聚合物、传感器和半导体领域有潜在的应用。在医药领域,作为一种新型的噻唑类化合物,它可能具有抗炎、抗病毒等生物活性。在聚合物领域,该化合物可用作增...
处理5-(PYRIDIN-4-YL)-OXAZOL-2-YLAMINE(CAS号:1014629-83-4)时应注意哪些实验室安全事项?
在处理5-(吡啶-4-基)-2-氧代-1-氧杂环己烷-3-胺时,应佩戴防护眼镜、手套和防护服。实验应在通风橱中进行,以避免吸入有害气体。如果发生泄露,应立即用大...
什么是伊托必利N-氧化物(CAS号:141996-98-7)?
伊托必利N-氧化物是一种化学化合物,其分子结构是伊托必利的N位进行氧化处理后的产物。它具有一定的生物活性,主要用于药物研究和开发。
氟氯烟酸(CAS号:82671-06-5)安全吗?
氟氯烟酸属于有机氯化物,具有一定的毒性,需谨慎处理。在操作过程中,应佩戴防护手套、护目镜和实验服,避免吸入其粉尘或蒸汽。接触皮肤或眼睛可能导致刺激,应采取适当的...
来源期刊
Analytical Methods

Analytical Methods welcomes early applications of new analytical and bioanalytical methods and technology demonstrating the potential for societal impact. We require that methods and technology reported in the journal are sufficiently innovative, robust, accurate, and compared to other available methods for the intended application. Developments with interdisciplinary approaches are particularly welcome. Systems should be proven with suitably complex and analytically challenging samples. We encourage developments within, but not limited to, the following technologies and applications: global health, point-of-care and molecular diagnostics biosensors and bioengineering drug development and pharmaceutical analysis applied microfluidics and nanotechnology omics studies, such as proteomics, metabolomics or glycomics environmental, agricultural and food science neuroscience biochemical and clinical analysis forensic analysis industrial process and method development














