Electrofuels from excess renewable electricity at high variable renewable shares: cost, greenhouse gas abatement, carbon use and competition

文献信息

发布日期 2021-01-07
DOI 10.1039/D0SE01067G
影响因子 6.367
作者

Markus Millinger, Kathleen Meisel


查看原文

摘要

Increasing shares of variable renewable electricity (VRE) generation are necessary for achieving high renewable shares in all energy sectors. This results in increased excess renewable electricity (ERE) at times when supply exceeds demand. ERE can be utilized as a low-emission energy source for sector coupling through hydrogen production via electrolysis, which can be used directly or combined with a carbon source to produce electrofuels. Such fuels are crucial for the transport sector, where renewable alternatives are scarce. However, while ERE increases with raising VRE shares, carbon emissions decrease and may become a limited resource with several usage options, including carbon storage (CCS). Here we perform a model based analysis for the German case until 2050, with a general analysis for regions with a high VRE reliance. Results indicate that ERE-based electrofuels could achieve a greenhouse gas (GHG) abatement of 74 MtCO2eq yearly (46% of current German transport emissions) by displacing fossil fuels, at high fuel-cell electric vehicle (FCEV) shares, at a cost of 250–320 € per tCO2eq. The capital expenditure of electrolysers was found not to be crucial for the cost, despite low capacity factors due to variable ERE patterns. Carbon will likely become a limiting factor when aiming for stringent climate targets and renewable electricity-based hydrocarbon electrofuels replacing fossil fuels achieve up to 70% more GHG abatement than CCS. Given (1) an unsaturated demand for renewable hydrocarbon fuels, (2) a saturated renewable hydrogen demand and (3) unused ERE capacities which would otherwise be curtailed, we find that carbon is better used for renewable fuel production than being stored in terms of overall GHG abatement.

相关文献

Al, Ga and In heterometallic wheels and their by-products

E. Carolina Sañudo, Christopher A. Muryn, Madeleine A. Helliwell, Wolfgang Wernsdorfer, Richard E. P. Winpenny

2006-11-23 Communication

DOI: 10.1039/B613877B

An expedient one-pot synthesis of para-tert-butylcalix[8]- and [9]arene

Sean P. Bew, Sunil V. Sharma

2006-12-11 Communication

DOI: 10.1039/B608482F

Catalytic enantioselective diboration, disilation and silaboration: new opportunities for asymmetric synthesis

Heather E. Burks, James P. Morken

2007-08-22 Feature Article

DOI: 10.1039/B707779C

Back cover

Front/Back Matter

DOI: 10.1039/B701795M

Template controlled self-assembly of bidentate phosphine complexes with hemilabile coordination behaviour

Samir Chikkali, Dietrich Gudat, Mark Niemeyer

2006-12-12 Communication

DOI: 10.1039/B616102B

Pattern-based sensing of nucleotides in aqueous solution with a multicomponent indicator displacement assay

Andrey Buryak, Alexei Pozdnoukhov, Kay Severin

2007-05-17 Communication

DOI: 10.1039/B705250B

Contents and Chemical Biology

Front/Back Matter

DOI: 10.1039/B706794C

Asymmetric synthesis of (+)-cis-nemorensic acid from a chiral Diels–Alder adduct of 2,5-dimethylfuran

Jae Yi Sim, Geum-Sook Hwang, Kyung Hwa Kim, Eun Mi Ko, Do Hyun Ryu

2007-10-01 Communication

DOI: 10.1039/B710537A

您可能还喜欢

化合物问答

奥美沙坦酯杂质4(CAS号:95579-71-8)的主要用途是什么?

奥美沙坦酯杂质4在药物工业中并无特定用途,主要作为生产和质量控制中的监控指标,以确保产品质量和符合相关规范。它具有一定的化学活性,因此在生产过程中需要严格控制其...

95579-71-84-Chloro-4-methyl-5-...
化合物问答

如何储存C3bot (154-182)(CAS号:1246280-79-4)?

C3bot (154-182)应储存在干燥、阴凉、通风良好的环境中,避免阳光直射。具体储存条件需要参考其相关安全数据表(SDS)中的储存信息。建议使用密闭容器存...

1246280-79-4C3bot (154-182)
化合物问答

在合成中是否有4-吡唑甲酸乙酯(CAS号:37622-90-5)的替代品?

在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如4-吡唑甲酸甲酯或其他吡唑类化合物。这些替代品在性质上相似,可以用于相似的合成反应中,但需根据具体应用...

37622-90-5Ethyl 1H-pyrazole-4-...
化合物问答

(2-溴乙基)三甲基硅烷(CAS号:18156-67-7)的主要用途是什么?

(2-溴乙基)三甲基硅烷主要用作有机合成中的溴代试剂,特别是在硅化学领域中,用于制备硅烷衍生物和硅基功能材料。它也用于表面改性、催化剂合成、医药中间体合成以及分...

18156-67-7(2-Bromoethyl)(trime...
化合物问答

如何处理含有2-(4-broMophenyl)-1,1,1-trifluoropropan-2-ol(CAS号:122243-28-1)的废料?

含该化合物的废料需按照危险废物管理规定进行分类和处理。首先,应尽量减少废料的产生,通过改进生产工艺实现废物最小化。对于不可避免的废料,建议采用安全的收集方法,避...

122243-28-12-(4-bromophenyl)-1,...
化合物问答

什么是1,1,1-三氟-6-苯基-5-(e)-己烯-2,4-二酮(CAS号:18931-64-1)?

1,1,1-三氟-6-苯基-5-(e)-己烯-2,4-二酮是一种有机化合物,化学式为C14H8F3O2。它是一种具有特定立体结构的芳香族化合物,属于酮类。

18931-64-1(5E)-1,1,1-Trifluoro...
化合物问答

2-(2-甲基哌啶-1-基)-2-氧代-乙酸(CAS号:77654-61-6)的主要用途是什么?

2-(2-甲基哌啶-1-基)-2-氧代-乙酸主要用于药物合成、有机合成及作为化学试剂。它在医药领域有一定的应用,可用于合成某些药物中间体。此外,它还用于实验室研...

77654-61-6(2-Methyl-1-piperidi...
化合物问答

如何储存(R)-1-(3-Chlorophenyl)-2,2,2-trifluoroethanamine(CAS号:1213627-66-7)?

应将(R)-1-(3-氯苯基)-2,2,2-三氟乙胺储存在阴凉、干燥、通风良好的地方,远离火源和热源。应使用密封的容器储存,并避免光照。储存温度应控制在室温范围...

1213627-66-7(1R)-1-(3-Chlorophen...
化合物问答

N-亚硝基-N,N-二壬基胺(CAS号:84424-96-4)的市场或研究趋势如何?

N-亚硝基-N,N-二壬基胺目前主要应用于有机合成和药物化学领域。市场趋势显示,随着有机合成技术的进步,该化合物在新药研发中的应用将更加广泛。新兴研究领域包括其...

84424-96-4N-Nitroso-N-nonyl-1-...
化合物问答

5-Chloro-2-methoxy-3-(2,2,2-trifluoroethoxy)pyridine(CAS号:1280786-68-6)的市场或研究趋势如何?

该化合物在医药、农药等领域有潜在应用价值,但市场需求较小。目前研究趋势主要集中在探索其在特定领域的应用潜力,如作为药物合成中的中间体。随着研究的深入,预计未来市...

1280786-68-65-Chloro-2-methoxy-3...
免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。