Performance enhancement of a self-biased n-ZnO microwire/p-GaN heterojunction ultraviolet photodetector incorporating Ag nanowires
文献信息
Yulan Xie, Peng Wan, Mingming Jiang, Yang Liu, Daning Shi, Caixia Kan
Low-dimensional self-powered ultraviolet photodetectors have attracted considerable attention on account of their wide potential applications. However, the photodetector performances severely suffer from various surface states and structural defects induced by a large volume-to-surface ratio of low-dimensional semiconductors, as well as conventional metal and ITO electrodes. Herein, a high-performance ultraviolet photodetector containing a single Ga-doped ZnO microwire covered by Ag nanowires (AgNWs@ZnO:Ga MW) and a p-type GaN wafer was proposed and constructed. Using an AgNW film as a highly transparent electrode, the fabricated photodetector can operate in a self-biasing manner, which exhibits a peak responsivity of 137 mA W−1 and a detectivity of 2.15 × 1012 Jones under 370 nm light illumination. Further, an ultrafast photoresponse (rising/falling times ∼22/339 μs) is achieved. Compared with a pristine ZnO:Ga MW/GaN heterojunction photodetector using ITO as a top electrode, the photosensitivity is significantly improved. In particular, the responsivity and detectivity are enhanced over 1100% and 700%, respectively. The enhanced mechanism was researched systematically. In the photodetector structure, the AgNW electrode serving as a transmission window has a higher optical transparency in the ultraviolet band, a more outstanding electrical property than that of the conventional ITO film electrode. Meanwhile, the plasmonic effect of the covered AgNWs on ZnO:Ga can facilitate the increase of light absorption, and then enhance the photocurrent at corresponding plasmon resonant wavelengths, directly resulting in an excellent photosensitivity. This work sheds light on the development of designing and fabricating high-performance self-powered ultraviolet photodetectors with ultrafast response speed and high photoresponsivity.
相关文献
Development of polycarbonate-containing block copolymers for thin film self-assembly applications
Ankit Vora, Rudy J. Wojtecki, Kristin Schmidt, Anindarupa Chunder, Joy Y. Cheng, Alshakim Nelson, Daniel P. Sanders
DOI: 10.1039/C5PY01846C
A reduction-responsive polypeptide nanogel encapsulating NIR photosensitizer for imaging guided photodynamic therapy
Titao Jing, Liyi Fu, Le Liu, Lifeng Yan
DOI: 10.1039/C5PY01629K
One-step grafting of polymers to graphene oxide
Helen R. Thomas, Daniel J. Phillips, Neil R. Wilson, Matthew I. Gibson, Jonathan P. Rourke
DOI: 10.1039/C5PY01358E
Turning into poly(ionic liquid)s as a tool for polyimide modification: synthesis, characterization and CO2 separation properties
Alexander S. Shaplov, Sofia M. Morozova, Elena I. Lozinskaya, Petr S. Vlasov, Andreia S. L. Gouveia, Liliana C. Tomé, Isabel M. Marrucho, Yakov S. Vygodskii
DOI: 10.1039/C5PY01553G
Continuous flow SET-LRP in the presence of P(VDF-co-CTFE) as macroinitiator in a copper tubular reactor
Ning Zhu, Xin Hu, Yajun Zhang, Kai Zhang, Zhenjiang Li, Kai Guo
DOI: 10.1039/C5PY01728A
Ru(bpy)32+ derivatized polystyrenes constructed by nitroxide-mediated radical polymerization. Relationship between polymer chain length, structure and photophysical properties
Gyu Leem, Shahar Keinan, Junlin Jiang, Zhuo Chen, Toan Pho, Zachary A. Morseth, Zhenya Hu, Egle Puodziukynaite, Zhen Fang, John M. Papanikolas, John R. Reynolds, Kirk S. Schanze
DOI: 10.1039/C5PY01289A
The influence of surface grafting on the growth rate of polymer chains
Chengjun Kang, Rowena Crockett, Nicholas D. Spencer
DOI: 10.1039/C5PY01521A
ROS self-scavenging polythiophene materials for cell imaging
Rong Hu, Fengyan Wang, Shengliang Li, Chenyao Nie, Meng Li, Hui Chen, Libing Liu, Fengting Lv, Shu Wang
DOI: 10.1039/C5PY01403D
您可能还喜欢
如何储存1,2-环己二酮环乙缩醛(CAS号:4746-96-7)?
1,2-环己二酮环乙缩醛应储存在阴凉、干燥、通风良好的地方,避免阳光直射。建议使用密封容器保存,并保持环境温度在室温范围内,远离火源和热源。
Ecopladib(CAS号:381683-92-7)的市场或研究趋势如何?
Ecopladib作为一种新型的药物,主要应用于治疗高胆固醇等疾病。目前,市场和研究趋势显示,Ecopladib因其独特的药理作用而受到关注。随着对心血管疾病治...
2,3-Dimethyl-3H-imidazo[4,5-c]pyridine(CAS号:52538-09-7)通常如何合成?
2,3-二甲基-3H-咪唑[4,5-c]吡啶通常通过咪唑和2,3-二甲基吡啶的缩合反应合成。具体来说,将咪唑和2,3-二甲基吡啶在适当的溶剂中进行加热或加压反应...
2,3,4,5-tetrahydro-1H-3-苯并氮杂环;盐酸盐(CAS号:17379-01-0)的市场或研究趋势如何?
该化合物在药物化学和有机合成中有一定的应用。近年来,随着对新型药物化合物的需求增加,该化合物的研究趋势主要集中在探索其生物活性,尤其是其在神经系统疾病治疗中的潜...
如何储存盐酸甘氨酸丁酯(CAS号:13048-99-2)?
盐酸甘氨酸丁酯应储存在阴凉、干燥、通风良好的地方,避免阳光直射和高温环境,温度应控制在25℃以下。储存容器应密封,避免与空气中的水分和酸性物质接触,以防发生水解...
什么是2-Iodo-N,N-dimethylbenzamide(CAS号:54616-46-5)?
2-碘-N,N-二甲基苯胺是一种有机化合物,化学名为2-Iodo-N,N-dimethylbenzamide。其分子式为C<sub>9</sub>H<sub>1...
5-溴-2-(4H-1,2,4-三唑-4-基)吡啶(CAS号:959240-99-4)的市场或研究趋势如何?
随着医药、农药和新材料领域的发展,该化合物作为关键中间体的应用日益增多。特别是在药物合成中,由于其独特的化学性质,可以用于合成多种药物分子。未来的研究趋势可能集...
2,4-二溴-6-三氟甲基嘧啶(CAS号:785778-00-9)通常如何合成?
2,4-二溴-6-三氟甲基嘧啶通常通过溴化反应合成。首先,将6-三氟甲基嘧啶与溴化剂(如液溴)在适当的溶剂(如二氯甲烷、四氢呋喃)中反应,加入适当的催化剂(如四...
来源期刊
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.











![N-[2-(4-Hydroxyphenoxy)-4-nitrophenyl]methanesulfonamide structure N-[2-(4-Hydroxyphenoxy)-4-nitrophenyl]methanesulfonamide structure](https://cnstatic.chemtradehub.com/structs/109/109032-22-6-7c88.webp)


