Electrokinetic generation of iron-rich barriers in soils: realising the potential for nuclear site management and decommissioning
文献信息
Jamie M. Purkis, Frances Burrell, James R. Brydie, James Graham, Laurence Hopkinson, Andrew B. Cundy
Following earlier field-scale pilot work on nuclear site materials in the late 2000s, there has recently been renewed research and industry interest in the application of electrokinetic technologies for nuclear site management and remediation in the UK. One relatively novel application of electrokinetics is the use of sacrificial steel electrodes (coupled with an in situ generated pH–Eh gradient in the treated material) to precipitate sub-surface iron-rich barriers for groundwater and/or leachate containment, which could be used to grout or contain contaminated fluids in the sub-surface on working nuclear sites or sites undergoing decommissioning. Here, we report previously unpublished data from two work programmes exploring the higher Technology Readiness Level (TRL) application of this electrokinetic iron-barrier approach to materials typical of those found in the subsurface of the Sellafield nuclear licensed site, UK. The first programme, funded by the UK National Nuclear Laboratory (NNL), assessed the electrokinetic generation of iron-rich barriers at metre + scale in simulated Sellafield materials, while the second programme, funded under the current UK TRANSCEND consortium project, examined electrokinetic iron-barrier formation at smaller (<1 m) scale, but in real site materials. Both programmes indicate that iron-rich barriers can be conveniently and electrokinetically grown in different geometries over reasonable timescales (months) in realistic site subsurface materials (sands), in electrolytes similar to natural waters found in the environment. Voltage requirements are low (<1 V cm−1) with energy and consumables costs of no more than single-digit or tens of US dollars at the metre-plus scale. Further work is needed however to assess the longevity of the iron precipitates forming the subsurface barrier, and to explore barrier generation at the geometries and scales required for (site specific) field application.
相关文献
Performance of thermally-chargeable supercapacitors in different solvents
Hyuck Lim, Cang Zhao
DOI: 10.1039/C4CP01610F
Charge storage properties of biopolymer electrodes with (sub)tropical lignins
Ting Yang Nilsson, Olle Inganäs
DOI: 10.1039/C4CP03777D
Photoconversion of 6,13-α-diketopentacene in the crystalline phase
Katsuki Tanaka, Mariko Oe
DOI: 10.1039/C4CP01607F
Creation of mesopores in carbon nanotubes with improved capacities for lithium ion batteries
Jiang Gong, Ryszard J. Kalenczuk, Ewa Mijiowska, Wenbin Liu, Tao Tang
DOI: 10.1039/C4CP04386C
New molecular-scale information on polystyrene dynamics in PS and PS–BaTiO3 composites from FTIR spectroscopy
D. Olmos, E. V. Martín, J. González-Benito
DOI: 10.1039/C4CP03516J
Theoretical simulation of reduction mechanism of graphene oxide in sodium hydroxide solution
Chu Chen, Weixin Kong, Hai-Ming Duan, Jun Zhang
DOI: 10.1039/C4CP01031K
Defect-induced semiconductor to metal transition in graphene monoxide
Jungwook Woo, Kyung-Han Yun, Sung Beom Cho, Yong-Chae Chung
DOI: 10.1039/C4CP01518E
Understanding the photothermal heating effect in non-lamellar liquid crystalline systems, and the design of new mixed lipid systems for photothermal on-demand drug delivery
Wye-Khay Fong, Tracey L. Hanley, Benjamin Thierry, Adam Tilley, Nigel Kirby, Lynne J. Waddington
DOI: 10.1039/C4CP03635B
Quantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries
Asghar Aryanfar, Daniel J. Brooks, Agustín J. Colussi, Michael R. Hoffmann
DOI: 10.1039/C4CP03590A
您可能还喜欢
4-[4-三氟甲基苯基]恶唑(CAS号:1126636-40-5)通常如何合成?
4-[4-三氟甲基苯基]恶唑通常通过将4-三氟甲基苯酚与异硫氰酸苯酯在有机溶剂中进行酯化反应合成。该反应可在无水条件下,使用适当的催化剂,如四丁基氢氧化铵,以提...
RockPhos Pd G3(CAS号:2009020-38-4)通常如何合成?
RockPhos Pd G3 通常通过钯催化偶联反应合成,使用配体 (2'-Amino-2-biphenylyl)(methanesulfonato-kappa...
1-哌啶甲酰胺(CAS号:2158-03-4)的市场或研究趋势如何?
1-哌啶甲酰胺作为有机合成中的重要中间体,其市场需求主要受医药、农药、染料等行业推动。近年来,随着新药开发和绿色化学的发展,该化合物的研究趋势集中在开发更高效、...
2-(二苯基膦基)乙胺(CAS号:4848-43-5)适用哪些法规指南?
2-(二苯基膦基)乙胺适用于多种法规指南,包括但不限于《全球化学品统一分类和标签制度》(GHS),欧盟《化学品注册、评估、授权和限制》法规(REACH),以及美...
如何储存间苯二甲酸二烯丙酯(CAS号:1087-21-4)?
间苯二甲酸二烯丙酯应储存在阴凉、干燥、通风良好的地方,远离火源和热源。储存容器应密封,避免光照和高温。储存温度应控制在25℃以下,相对湿度应低于80%。避免与其...
什么是间甲苯异硫代异氰酸酯(CAS号:621-30-7)?
间甲苯异硫代异氰酸酯是一种有机化合物,分子式为C7H7NO2S,具有刺激性气味。它是一种重要的有机合成中间体,在合成其他化合物时广泛应用。
在合成中是否有N-Boc-D-苯丙氨醇(CAS号:106454-69-7)的替代品?
在合成中,可以考虑使用N-Cbz-D-苯丙氨醇或N-Fmoc-D-苯丙氨醇作为替代品。这些化合物同样具有保护氨基的功能,且在合成过程中表现出良好的反应性能。
3-羟甲基-2-氧异丙基吡啶(CAS号:954240-50-7)的主要用途是什么?
3-羟甲基-2-氧异丙基吡啶主要用于有机合成领域,可以作为合成其他药物、农药或精细化学品的中间体。此外,它还可能在实验室研究中作为特定反应的前体或溶剂。
6-氨基-9-甲基嘌呤(CAS号:700-00-5)应用于哪些行业?
6-氨基-9-甲基嘌呤目前主要应用于医药行业,作为某些药物的中间体。此外,它还可能用于聚合物、传感器和半导体的某些领域,作为功能性单体或掺杂剂。












![3-[(4-Nitrobenzyl)oxy]-3-oxopropanoic Acid structure 3-[(4-Nitrobenzyl)oxy]-3-oxopropanoic Acid structure](https://cnstatic.chemtradehub.com/structs/773/77359-11-6-0d04.webp)


