Differential supercapacitor and Schottky diode behaviours in two new isostructural coordination polymers based on redox active metal ions
文献信息
Chhatan Das, Subhrajyoti Debnath, Vishwas D. Patel, Dhritiman Gupta, Anjan Banerjee, Partha Mahata
Two new isostructural 2D coordination polymers, denoted 1(Mn) and 2(Fe), have been synthesized using the layer diffusion method. These polymers, {[Mn(PDA)(4-bpdb)(H2O)2]·4-bpdb}n and {[Fe(PDA)(4-bpdb)(H2O)2]·4-bpdb}n, incorporated 1,4-phenylenediacetate (PDA) and 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene (4-bpdb) ligands. Structural analysis through the single-crystal X-ray study revealed that compound 1(Mn) and compound 2(Fe) exhibited a one-dimensional connectivity along the a-axis between metal ions (Mn(II)/Fe(II)) and 1,4-phenylenediacetate ligands and formed a 2D layered structure interconnected with 4-bpdb. These layers are arranged in an AAA… pattern along the b-axis, forming a three-dimensional supramolecular structure. Non-bonded 4-bpdb molecules occupy voids within this arrangement, stabilized by hydrogen bonds and π⋯π interactions. The redox-active metal centers (Mn2+/Fe2+) present in the coordination polymers hold promise for electrochemical studies. Supercapacitor assessment revealed an intriguing discrepancy: compound 1(Mn) demonstrated nearly 2.5 times greater specific capacitance than compound 2(Fe) in a 1 M H2SO4 medium, despite their isostructural nature. However, cyclic stability testing showed a reverse trend, with compound 2(Fe) exhibiting excellent stability, retaining 98% capacity after 5000 cycles compared to 1(Mn)'s 78%. Conductivity measurements indicated that compound 1(Mn) possesses conductivity 10 times superior to that of compound 2(Fe). Notably, both compounds exhibited potential for Schottky diode fabrication. Overall, this study highlights the influence of specific metal ions on distinctive supercapacitor characteristics and conductivity within isostructural coordination polymers.
相关文献
A cavitand with a fluorous rim acts as an amine receptor
Richard J. Hooley, Per Restorp, Julius Rebek Jr
DOI: 10.1039/B814069C
The asymmetric total synthesis of (−)-securinine
Bhartesh Dhudshia, Benjamin F. T. Cooper, Charles L. B. Macdonald, Avinash N. Thadani
DOI: 10.1039/B816576A
Chemoenzymatic synthesis of chiral 4,4′-bipyridyls and their metal–organic frameworks
Lenuta Sbircea, Narain D. Sharma, William Clegg, Ross W. Harrington, Peter N. Horton, Michael B. Hursthouse, David C. Apperley, Derek R. Boyd, Stuart L. James
DOI: 10.1039/B812366G
Simplified methods for the functionalisation of 3-hexoxythiophenes at the 5-position and further reactions to alkynyl and vinyl derivatives
Mike Joachim Zöllner, Ullrich Jahn, Eike Becker, Wolfgang Kowalsky, Hans-Hermann Johannes
DOI: 10.1039/B817089D
Noncovalent insertion of ferrocenes into the protein shell of apo-ferritin
Jochen Niemeyer, Satoshi Abe, Tatsuo Hikage, Gerhard Erker, Yoshihito Watanabe
DOI: 10.1039/B813181C
Ion jelly: a tailor-made conducting material for smart electrochemical devices
Pedro Vidinha, Carlos Pinheiro, Ana R. Brás, Tânia Carvalho, Teresa Santos-Silva, Abhik Mukhopadhyay, Maria J. Romão, Jorge Parola, Madalena Dionisio, Joaquim M. S. Cabral, Carlos A. M. Afonso, Susana Barreiros
DOI: 10.1039/B811647D
Aqueous dispersions of TCNQ-anion-stabilized graphene sheets
Rui Hao, Wen Qian, Luhui Zhang, Yanglong Hou
DOI: 10.1039/B816971C
A snapshot of a coordination polymerself-assembly process: the crystallization of a metastable 3D network followed by the spontaneous transformation in water to a 2D pseudopolymorphic phase
Thierry Bataille, Ferdinando Costantino, Andrea Ienco, Annalisa Guerri, Fabio Marmottini, Stefano Midollini
DOI: 10.1039/B813222D
Polyfunctional benzylic zinc chlorides by the direct insertion of magnesium into benzylic chlorides in the presence of LiCl and ZnCl2
Albrecht Metzger, Fabian M. Piller, Paul Knochel
DOI: 10.1039/B812396A
您可能还喜欢
4-[4-三氟甲基苯基]恶唑(CAS号:1126636-40-5)通常如何合成?
4-[4-三氟甲基苯基]恶唑通常通过将4-三氟甲基苯酚与异硫氰酸苯酯在有机溶剂中进行酯化反应合成。该反应可在无水条件下,使用适当的催化剂,如四丁基氢氧化铵,以提...
RockPhos Pd G3(CAS号:2009020-38-4)通常如何合成?
RockPhos Pd G3 通常通过钯催化偶联反应合成,使用配体 (2'-Amino-2-biphenylyl)(methanesulfonato-kappa...
1-哌啶甲酰胺(CAS号:2158-03-4)的市场或研究趋势如何?
1-哌啶甲酰胺作为有机合成中的重要中间体,其市场需求主要受医药、农药、染料等行业推动。近年来,随着新药开发和绿色化学的发展,该化合物的研究趋势集中在开发更高效、...
2-(二苯基膦基)乙胺(CAS号:4848-43-5)适用哪些法规指南?
2-(二苯基膦基)乙胺适用于多种法规指南,包括但不限于《全球化学品统一分类和标签制度》(GHS),欧盟《化学品注册、评估、授权和限制》法规(REACH),以及美...
如何储存间苯二甲酸二烯丙酯(CAS号:1087-21-4)?
间苯二甲酸二烯丙酯应储存在阴凉、干燥、通风良好的地方,远离火源和热源。储存容器应密封,避免光照和高温。储存温度应控制在25℃以下,相对湿度应低于80%。避免与其...
什么是间甲苯异硫代异氰酸酯(CAS号:621-30-7)?
间甲苯异硫代异氰酸酯是一种有机化合物,分子式为C7H7NO2S,具有刺激性气味。它是一种重要的有机合成中间体,在合成其他化合物时广泛应用。
在合成中是否有N-Boc-D-苯丙氨醇(CAS号:106454-69-7)的替代品?
在合成中,可以考虑使用N-Cbz-D-苯丙氨醇或N-Fmoc-D-苯丙氨醇作为替代品。这些化合物同样具有保护氨基的功能,且在合成过程中表现出良好的反应性能。
3-羟甲基-2-氧异丙基吡啶(CAS号:954240-50-7)的主要用途是什么?
3-羟甲基-2-氧异丙基吡啶主要用于有机合成领域,可以作为合成其他药物、农药或精细化学品的中间体。此外,它还可能在实验室研究中作为特定反应的前体或溶剂。
6-氨基-9-甲基嘌呤(CAS号:700-00-5)应用于哪些行业?
6-氨基-9-甲基嘌呤目前主要应用于医药行业,作为某些药物的中间体。此外,它还可能用于聚合物、传感器和半导体的某些领域,作为功能性单体或掺杂剂。
来源期刊
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.













