In situ determination of sulfur isotopes in sulfur-rich materials by laser ablation multiple-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS)
文献信息
Paul R. D. Mason, Jan Košler, Paul J. Sylvester, Simon Meffan-Main
A new method has been developed for the accurate and precise measurement of sulfur isotopes (32S, 33S, 34S) in solids on a scale down to 80–100 μm by laser ablation multiple collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS). The method was developed independently on two different sets of instrumentation, both of which give equivalent results with comparable accuracy and precision. The first instrumental set-up utilizes Xe gas in a hexapole collision and reaction cell for interference attenuation coupled with a mass discrimination correction by external normalization using a nebulised vapour of 37Cl/35Cl standard solution. The second employs high mass resolution by sector field mass spectrometry to avoid the interfering O2+ isobars with a 30Si/29Si standard aerosol for external normalization. The external isotope mass discrimination correction was applied using the exponential law and was further calibrated for both sets of instrumentation by linear interpolation in a sample–standard bracketing method. Mean δ34SV-CDT and δ33SV-CDT show excellent agreement (within analytical error, typically 0.6 and 1.5‰, respectively) with compiled data for IAEA-S series AgS standard reference materials. Results for NIST SRM 127 (sulfate) were less accurate when calibrated against the IAEA-S series sulfides, whilst significant and consistent deviations in accuracy of up to 3‰ were observed in both sets of instrumentation for Soufre de Lacq SRM sulfur. Such generic matrix effects may be widespread in LA-ICP-MS due to differential ablation rates, particle formation, particle transport efficiency and ionization efficiency in an argon plasma.
相关文献
Fast molecular fingerprinting with a coherent, rapidly tunable dual-comb spectrometer near 3 μm
Pei-Ling Luo, Er-Chien Horng
DOI: 10.1039/C9CP03090E
Defining aluminum-zoning during synthesis of ZSM-5 zeolites
Teng Li, Frank Krumeich, Ming Chen, Zhiqiang Ma
DOI: 10.1039/C9CP05423E
Onset of ionic coherence and ultrafast charge dynamics in attosecond molecular ionisation
DOI: 10.1039/C9CP03074C
Enhanced VOC of two-dimensional Ruddlesden–Popper perovskite solar cells using binary synergetic organic spacer cations
Di Huang, Haina Zhu
DOI: 10.1039/C9CP04018H
Quantitative determination of the phosphorus environment in lithium aluminosilicate glasses using solid-state NMR techniques
Monique Comte, Lionel Montagne, Bertrand Doumert, Laurent Cormier
DOI: 10.1039/C9CP03181B
Graphene coated gold nanoparticles: an emerging class of nanoagents for photothermal therapy applications
Mohsen Farokhnezhad, Mahdi Esmaeilzadeh
DOI: 10.1039/C9CP03126J
Spontaneous proton transfer in a series of amphoteric molecules under hydrostatic pressure
Binhong Yu, Yi Wang, Lingrui Wang, Xiao Tan, Yu-Mo Zhang, Minjie Li, Bo Zou, Sean Xiao-An Zhang
DOI: 10.1039/C9CP02445J
Replica exchange MD simulations of two-dimensional water in graphene nanocapillaries: rhombic versus square structures, proton ordering, and phase transitions
Shujuan Li, Burkhard Schmidt
DOI: 10.1039/C9CP00849G
您可能还喜欢
如何储存8-溴-4-羟基-6-(三氟甲氧基)喹啉-3-羧酸乙酯(CAS号:1072944-81-0)?
8-溴-4-羟基-6-(三氟甲氧基)喹啉-3-羧酸乙酯应储存在阴凉、干燥的地方,避免光照和高温。建议使用密封容器进行储存,以防止水分和空气的影响。
2,2-二(2-呋喃基)丙烷(CAS号:17920-88-6)的市场或研究趋势如何?
2,2-二(2-呋喃基)丙烷的研究趋势主要集中在新型材料的开发和应用,如高分子材料、有机光电材料等。市场趋势方面,随着环保要求的提高和新材料的应用,该化合物的需...
如何处理含有螺[呋喃并[3,4-b]吡啶-5(7H),4'-哌啶]-7-酮盐酸盐(CAS号:475152-31-9)的废料?
对于含有螺[呋喃并[3,4-b]吡啶-5(7H),4'-哌啶]-7-酮盐酸盐的废料,应首先进行分类和分离,以减少危险物质的数量。随后,可以考虑通过化学氧化、生物...
Cinnamyl 3-aminobut-2-enoate(CAS号:113898-97-8)安全吗?
Cinnamyl 3-氨基丁-2-烯酸在接触皮肤和眼睛时可能会引起刺激。应避免吸入其粉尘和烟雾。操作时应穿戴适当的个人防护装备,如手套、护目镜和实验室外套。
反式-2-十二碳烯二酸(CAS号:6402-36-4)的市场或研究趋势如何?
反式-2-十二碳烯二酸在医药、材料科学等领域有一定的应用,但其市场相对较小。近年来,由于环保意识的提升,对环境友好型化学品的需求增加,研究倾向于开发更绿色的合成...
什么是(9ci)-1H-苯并咪唑-5-乙酸(CAS号:473895-86-2)?
(9ci)-1H-苯并咪唑-5-乙酸是一种含氮杂环化合物,其化学结构为1H-苯并咪唑-5-乙酸。该化合物具有特定的分子式C8H7NO2,属于有机酸类化合物。
酞菁蓝(CAS号:147-14-8)的主要用途是什么?
酞菁蓝主要用作颜料和染料,广泛应用于塑料、油墨、涂料、纺织品及橡胶工业中。它也用于光敏材料,如太阳能电池和光刻胶。在医疗领域,酞菁蓝因其光敏特性被用于某些光动力...
5-甲基-1,2,3,4-四氢异喹啉(CAS号:123593-99-7)安全吗?
5-甲基-1,2,3,4-四氢异喹啉在使用和储存时需要谨慎处理。它具有一定的毒性,应避免吸入其蒸气或直接接触皮肤和眼睛。操作此化合物时,建议佩戴防护眼镜、实验服...
如何处理含有3',4',5'-三甲氧基苯乙酮(CAS号:1136-86-3)的废料?
含有3',4',5'-三甲氧基苯乙酮的废液应首先确保其是否为危险废物,根据当地法规确定处理方法。通常,这类有机废液可以采用中和反应降低其pH值,然后通过蒸馏或萃...
如何储存KI-7(CAS号:1489263-00-4)?
KI-7应储存在通风良好的干燥环境中,避免光照和高温。建议使用密封容器储存,并保持在阴凉处。储存温度应控制在室温范围内,一般建议不超过25°C。避免与氧化剂接触...
来源期刊
Journal of Analytical Atomic Spectrometry

The Journal of Analytical Atomic Spectrometry (JAAS) is the central journal for publishing innovative research on fundamentals, instrumentation, and methods in the determination, speciation and isotopic analysis of (trace) elements within all fields of application. This includes, but is not restricted to, the most recent progress, developments and achievements in all forms of atomic and elemental detection, isotope ratio determination, molecular analysis, plasma-based analysis and X-ray techniques. The journal welcomes full papers, communications, technical notes, critical and tutorial review articles, editorials, and comments, in addition to the Atomic Spectrometry Updates (ASU) literature reviews that are prepared by an expert panel. Submissions are welcome in the following areas, but note this list reflects the current scope and authors are strongly encouraged to contact the Editorial team if they believe that their work offers potentially new and emerging research relevant to the journal remit: Fundamental studies in the following. New and existing sources for atomic emission, absorption, fluorescence and mass spectrometry and those that provide both atomic and molecular information Sample introduction techniques for solids, liquids, gases Improvements in sensitivity, selectivity, precision, accuracy and/or robustness Isotope ratio measurements, including techniques for improving precision and mass bias correction Single channel and multichannel simultaneous detection systems Chemometrics, statistics, calibration techniques and internal standardisation Theoretical and numerical modelling of fundamental processes related to all of the above methodologies Novel or improved methodologies in areas of application including, but not limited to the following. Biosciences, including elemental, speciation and isotopic analysis in biological systems, immunoassays based on metal-labeled antibodies, bio-imaging, and nanoparticle toxicology Geochemistry Environmental science Materials science, including engineered nanoparticles and quantum dots Metrology, including reference materials Forensic analysis Food and agricultural sciences Energy Archaeometry Molecular analysis. Molecular sources for elemental and isotopic analysis Atomic sources for molecular analysis Atomic and molecular techniques simultaneously used for complementary chemical information All contributions are judged on originality and quality of scientific content, and appropriateness of length to content of new science.










![6-Bromo-3-ethyl-3H-imidazo[4,5-b]pyridine structure 6-Bromo-3-ethyl-3H-imidazo[4,5-b]pyridine structure](https://cnstatic.chemtradehub.com/structs/103/1033202-59-3-2a8f.webp)

![Methyl 3-({2'-[(E)-(hydroxyhydrazono)methyl]-4-biphenylyl}methyl)-2-oxo-2,3-dihydro-1H-benzimidazole-4-carboxylate structure Methyl 3-({2'-[(E)-(hydroxyhydrazono)methyl]-4-biphenylyl}methyl)-2-oxo-2,3-dihydro-1H-benzimidazole-4-carboxylate structure](https://cnstatic.chemtradehub.com/structs/149/1499167-72-4-034a.webp)
![2-[(5Z,8Z,11Z,14Z)-5,8,11,14-Icosatetraen-1-yloxy]-1,3-propanediol structure 2-[(5Z,8Z,11Z,14Z)-5,8,11,14-Icosatetraen-1-yloxy]-1,3-propanediol structure](https://cnstatic.chemtradehub.com/structs/222/222723-55-9-0348.webp)
