A quantum dot–lucigenin probe for Cl−
文献信息
Maria Jose Ruedas-Rama, Elizabeth A. H. Hall
In this work, the first chloride ion sensor based on QD–lucigenin nanoparticles is reported. The mechanism uses the ability of semiconductor QDs to engage in short range exchange processes, leading to fluorescence changes. An acridinium dication (lucigenin) which is an electron acceptor, was self-assembled on the surface of negative charged QDs (capped with mercaptopropionic acid). Mutual quenching of the lucigenin and QD were observed. From a sphere of action, Perrin-type model, exchange was estimated to occur over a range of the order of 2 nm. The possibility of spin–orbit coupling (SOC) or electron transfer between the QD and the lucigenin dication (Luc2+) is discussed. The radical cation Luc+˙ was not identified, but electron transfer from the QD conduction band to the Luc2+, then electron transfer back, from the Luc+˙ to the QD valence band, could lead to mutual quenching, without build up of Luc+˙. SOC between the QD and lucigenin, with or without charge transfer being involved, can also account for the results obtained. Lucigenin is also a chloride-sensitive indicator dye, with a sensing mechanism based on SOC. In the QD–MPA–lucigenin conjugate luminescence is restored by adding chloride ion. Thus, the presence of chloride is transduced into an enhancement of the luminescence of QDs. Using this operating principle, a chloride ion sensor based on CdSe–ZnS core–shell QD nanoparticles, showed a very good linearity in the range 1–250 mM, with a detection limit 0.29 mM and a RSD of 2.5% (n = 10). In a study of interferences, the chloride sensitive QDs showed good selectivity to most of the other anions tested. The versatility of the system was also demonstrated in terms of fluorescent emission wavelength, which could be selected across a wide range through choice of QDs. Examples are shown for λmax = 500, 540 and 620 nm. The results from samples mimicking physiological conditions suggested very good applicability in the determination of chloride ion in physiological samples.
相关文献
Equation-of-state modeling of mixtures with ionic liquids
Costas Tsioptsias, Ioannis Tsivintzelis, Costas Panayiotou
DOI: 10.1039/C000208A
Oxidization states of metal atoms in linear bimetallic multi-sandwich molecules Vn(FeCp2)(n+1) and magnetic moment enhancement mechanism of its 1D wire
Hongmei Jin, Valeri Ligatchev, Shuo-Wang Yang, Michael B. Sullivan, Yuanping Feng
DOI: 10.1039/B927272K
Fluxional σ-bonds of 2,5,8-tri-tert-butyl-1,3-diazaphenalenyl dimers: stepwise [3,3], [5,5] and [7,7] sigmatropic rearrangementsviaπ-dimer intermediates
Yong-Hui Tian, Jingsong Huang, Miklos Kertesz
DOI: 10.1039/B925259B
In situXAS and IR studies on Cu:SAPO-5 and Cu:SAPO-11: the contributory role of monomeric linear copper(i) species in the selective catalytic reduction of NOx by propene
Karina Mathisen, David G. Nicholson
DOI: 10.1039/B902491C
A fast redox-induced switching mechanism in a conformationally controllable molecular thread in solution‡
Costantino Zazza, Andrea Amadei, Nico Sanna, Massimiliano Aschi
DOI: 10.1039/B926627E
Understanding microwave heating effects in single mode type cavities—theory and experiment
John Robinson, Sam Kingman, Derek Irvine, Peter Licence, Alastair Smith, Georgios Dimitrakis, David Obermayer, C. Oliver Kappe
DOI: 10.1039/B922797K
DFT 2H quadrupolar coupling constants of ruthenium complexes: a good probe of the coordination of hydrides in conjuction with experiments
Iker del Rosal, Torsten Gutmann, Laurent Maron, Franck Jolibois, Bruno Chaudret, Bernadeta Walaszek, Hans-Heinrich Limbach, Romuald Poteau, Gerd Buntkowsky
DOI: 10.1039/B822150B
Density functional study of aurophilic interaction in [X(AuPH3)2+]2 (X = F, Cl, Br, I)
Hua Fang, Xiao-Gang Zhang, Shu-Guang Wang
DOI: 10.1039/B821546D
Parallel ultrafast E–C ring closure and E–Z isomerisation in a photochromic furylfulgide studied by femtosecond time-resolved spectroscopy
Ron Siewertsen, Falk Renth, Friedrich Temps, Frank Sönnichsen
DOI: 10.1039/B821344E
Adenine deactivation in DNA resolved at the CASPT2//CASSCF/AMBER level
Irene Conti, Piero Altoè, Marco Stenta, Marco Garavelli
DOI: 10.1039/B926608A
您可能还喜欢
十二烷基磺酸钠(CAS号:2386-53-0)的主要用途是什么?
十二烷基磺酸钠主要用作表面活性剂,广泛应用于洗涤剂、肥皂、化妆品和工业清洁产品中。它能有效去除油脂和污垢,常用于制造洗发水、沐浴露、洗衣粉和金属清洗剂。此外,它...
5-羟基异喹啉(CAS号:2439-04-5)适用哪些法规指南?
5-羟基异喹啉作为化学品,主要适用的法规包括GHS全球化学品统一分类和标签制度,REACH法规等。GHS将5-羟基异喹啉分类为皮肤腐蚀/刺激类别2,严重眼损伤/...
在合成中是否有FIDAS-5 | Wnt(CAS号:1391934-98-7)的替代品?
合成中可以考虑使用类似结构的化合物,如4-[(E)-2-(2-氯-6-氟苯基)乙烯基]-N-甲基苯胺的类似物或衍生物作为替代品。这类化合物可能具有相似的生物活性...
(R)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate(CAS号:1370600-56-8)通常如何合成?
该化合物通常通过如下步骤合成:首先,将4-溴-1H-咪唑与对甲苯磺酸在乙酸乙酯中反应,得到中间体5-溴-1H-咪唑-2-甲酸乙酯。然后,该中间体与2-甲基-2-...
处理4-(吡咯烷-1-基)环己酮(CAS号:10421-18-8)时应注意哪些实验室安全事项?
处理4-(吡咯烷-1-基)环己酮时,应佩戴手套、护目镜和实验室外套,以防止直接接触或吸入。在通风橱中操作,确保良好的通风条件。一旦发生泄漏,应立即清理并使用适当...
如何处理含有异麦芽糖醇(CAS号:534-73-6)的废料?
含有异麦芽糖醇的废液应首先进行分类收集,避免与其他化学品混合。对于小规模的废液,可以通过焚烧或加入特定的化学试剂进行无害化处理。对于大规模的废液,建议联系专业的...
7-甲基壬酸(CAS号:41653-89-8)的主要用途是什么?
7-甲基壬酸主要用于有机合成领域,作为合成其他化合物的原料。此外,它还可能作为一种中间体用于药品制造和香料合成,但具体用途需要根据其具体的化学结构和反应特性来确...
N-甲氧基-N-甲基甲基吡啶羧酰胺(CAS号:148493-07-6)应用于哪些行业?
N-甲氧基-N-甲基甲基吡啶羧酰胺在医药领域有一定的应用,作为一种潜在的药物前体或中间体。此外,该化合物也可能应用于聚合物改性剂、传感器材料等。由于其独特的化学...
什么是惕各酸香叶酯(CAS号:7785-33-3)?
惕各酸香叶酯是一种化合物,化学名称为(2E)-3,7-二甲基-2,6-辛二烯-1-基(2E)-2-甲基-2-丁烯酸酯。它是一种具有香叶香气的化合物,分子式为C1...
1-环丁基哌嗪(CAS号:132800-13-6)安全吗?
1-环丁基哌嗪在适当的操作条件下是相对安全的,但如遇明火或高热会释放有毒气体。操作时应佩戴防护眼镜和手套,避免吸入或接触皮肤、眼睛。
来源期刊
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.










![4-[2-(Trichlorosilyl)ethyl]benzenesulfonyl chloride structure 4-[2-(Trichlorosilyl)ethyl]benzenesulfonyl chloride structure](https://cnstatic.chemtradehub.com/structs/797/79793-00-3-de16.webp)



