Electrical conductivity–defect structure correlation of variable-valence and fixed-valence acceptor-doped BaTiO3 in quenched state
文献信息
Han-Ill Yoo, Tae-Sik Oh, Hyung-Soon Kwon, Dong-Kyu Shin, Jong-Sook Lee
Insulation resistance degradation of dielectric BaTiO3 is expected to be closely correlated to its defect structure frozen in from elevated processing temperatures. For BaTiO3, respectively doped with variable-valence (MnTi) and fixed-valence acceptors (AlTi), their defect structures were frozen in by quenching at different equilibrium oxygen activities in the range of −18 < log aO2≤ 0 at 1000 and 900 °C, respectively, and their electrical conductivities were measured against temperature in the range of 200 ≤T/K ≤ 494 by impedance spectroscopy. Frozen-in defect structures were calculated and compared with the conductivity as measured in the quenched state. A close correlation has been confirmed between the bulk conductivity as measured in the quenched state and the frozen-in defect structure as calculated. The effects of variable- and fixed-valence acceptor impurities on the defect structure and electrical conductivity in the quenched state are highlighted in the light of hole trapping, and the charge transport behavior in the quenched state is discussed.
相关文献
Identification and composition of conformational isomers and their cations in crotonaldehyde by VUV-MATI spectroscopy
Sung Man Park, Hong Lae Kim, Chan Ho Kwon
DOI: 10.1039/C8CP05577G
Pressure-induced chemical reactions in the N2(H2)2 compound: from the N2 and H2 species to ammonia and back down into hydrazine
D. Laniel, V. Svitlyk, G. Weck, P. Loubeyre
DOI: 10.1039/C7CP07989C
Harvesting visible light with MoO3 nanorods modified by Fe(iii) nanoclusters for effective photocatalytic degradation of organic pollutants
U. Alam, S. Kumar, J. Koch, C. Tegenkamp, M. Muneer
DOI: 10.1039/C7CP08206A
Predicted detonation properties at the Chapman–Jouguet state for proposed energetic materials (MTO and MTO3N) from combined ReaxFF and quantum mechanics reactive dynamics
Sergey V. Zybin, William A. Goddard, III, Tao Cheng, Saber Naserifar, Andres Jaramillo-Botero, Fenglei Huang
DOI: 10.1039/C7CP07321F
Multiionic effects on the capacitance of porous electrodes
M. L. Jiménez, S. Ahualli, P. Arenas-Guerrero, M. M. Fernández, G. Iglesias, A. V. Delgado
DOI: 10.1039/C7CP06778J
Molecular investigation of the wettability of rough surfaces using molecular dynamics simulation
Hamzeh Yaghoubi, Masumeh Foroutan
DOI: 10.1039/C8CP03762K
Low-temperature solution-processed vanadium oxide as hole transport layer for efficient and stable perovskite solar cells
Qiang Guo, Chenyun Wang, Jinyan Li, Yiming Bai, Fuzhi Wang, Lin Liu, Bing Zhang, Ahmed Alsaedi, Zhan’ao Tan
DOI: 10.1039/C8CP03223H
Effects of point defects on the magnetoelectronic structures of MXenes from first principles
Arkamita Bandyopadhyay, Dibyajyoti Ghosh
DOI: 10.1039/C7CP07165E
Why does the Y326I mutant of monoamine oxidase B decompose an endogenous amphetamine at a slower rate than the wild type enzyme? Reaction step elucidated by multiscale molecular simulations
Urška Jug, Janez Mavri, Jernej Stare
DOI: 10.1039/C7CP07069A
Zr2Si: an antiferromagnetic Dirac MXene
Xiaofei Shao, Xiaobiao Liu, Xiaoming Zhang, Junru Wang, Mingwen Zhao
DOI: 10.1039/C7CP08108A
您可能还喜欢
(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?
(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。
如何储存亚胺菌(CAS号:136470-79-6)?
亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。
2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?
2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...
处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?
在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...
(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?
该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。
在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?
芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...
2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?
2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...
2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?
2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...
什么是4SC 202;4SC202(CAS号:1186222-89-8)?
4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














![2-[({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)methyl]isonicotinic acid structure 2-[({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)methyl]isonicotinic acid structure](https://cnstatic.chemtradehub.com/structs/473/473924-63-9-973b.webp)