The influence of support and particle size on the platinum catalysed oxygen reduction reaction
文献信息
Brian E. Hayden, Derek Pletcher, Jens-Peter Suchsland, Laura J. Williams
A range of platinum deposits, equivalent thicknesses (δ) 0.2–2.5 nm, have been synthesised on carbon and reduced titania (TiOx) supports using physical vapour deposition on (10 × 10) arrays of electrodes. For δ < 1.0 nm, discrete platinum centres are formed and the TiOx supported platinum show two distinct characteristics: (a) a strong positive shift in the potential for the oxidation of monolayers of CO with decreasing loading of Pt leading to an inability to oxidise the CO on the lowest loadings and (b) a strong negative shift in the potential for the reduction of oxygen. Both observations can be understood in terms of an increase in the irreversibility of the Pt/PtO couple at such surfaces. The same trends, although significantly weaker, are seen with the carbon supported platinum, δ < 1.0 nm, and it is suggested that the Pt/PtO couple on carbon shows intermediate kinetics between Pt on TiOx and bulk Pt. These results have significant implications for understanding the mechanism of oxygen reduction on supported Pt catalysts and hence for the search for alternative supports to platinum for ORR electrocatalysts.
相关文献
Calibration of 57Fe isomer shift from ab initio calculations: can theory and experiment reach an agreement?
Reshmi Kurian, Michael Filatov
DOI: 10.1039/B918655G
Disproportionation of thermoelectric bismuth telluridenanowires as a result of the annealing process‡
Andreas Berger, Laurent Cagnon, Ulrich Gösele, Kornelius Nielsch
DOI: 10.1039/C0CP00749H
Multinuclear gallium-oxidecations in high-silica zeolites‡
Evgeny A. Pidko, Rutger A. van Santen, Emiel J. M. Hensen
DOI: 10.1039/B815943B
Solid and liquid charge-transfer complex formation between 1-methylnaphthalene and 1-alkyl-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide ionic liquids
Daniel T. Bowron, Simon J. Teat
DOI: 10.1039/B921160H
Measurement of multiple torsional angles from one-dimensional solid-state NMR spectra: application to the conformational analysis of a ligand in its biological receptor site
Rachel Edwards, Jillian Madine, Lee Fielding, David A. Middleton
DOI: 10.1039/C0CP00326C
A liposome-based energy conversion system for accelerating the multi-enzyme reactions‡
Ryuhei Matsumoto, Masaya Kakuta, Taiki Sugiyama, Yoshio Goto, Hideki Sakai, Yuichi Tokita, Tsuyonobu Hatazawa, Seiya Tsujimura, Osamu Shirai, Kenji Kano
DOI: 10.1039/C0CP00556H
Correlation between polarity parameters and dielectric properties of [Na][TOTO]—a sodium ionic liquid
Oliver Zech, Johannes Hunger, Joshua R. Sangoro, Ciprian Iacob, Friedrich Kremer, Werner Kunz, Richard Buchner
DOI: 10.1039/C0CP00840K
Spectroscopic study of the reaction between Br2 and dimethyl sulfide (DMS), and comparison with a parallel study made on Cl2 + DMS: possible atmospheric implications
Sonya Beccaceci, J. Steven Ogden, John M. Dyke
DOI: 10.1039/B917173H
New nearly constant loss feature detected in glass at low temperatures
David M. Laughman, Radha D. Banhatti, Klaus Funke
DOI: 10.1039/C0CP00765J
您可能还喜欢
(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?
(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。
如何储存亚胺菌(CAS号:136470-79-6)?
亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。
2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?
2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...
处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?
在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...
(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?
该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。
在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?
芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...
2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?
2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...
2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?
2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...
什么是4SC 202;4SC202(CAS号:1186222-89-8)?
4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![2-[({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)methyl]isonicotinic acid structure 2-[({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)methyl]isonicotinic acid structure](https://cnstatic.chemtradehub.com/structs/473/473924-63-9-973b.webp)

![Benzyl spiro[indole-3,4'-piperidine]-1(2H)-carboxylate hydrochloride (1:1) structure Benzyl spiro[indole-3,4'-piperidine]-1(2H)-carboxylate hydrochloride (1:1) structure](https://cnstatic.chemtradehub.com/structs/159/159635-46-8-8de0.webp)