Direct carbon conversion in a SOFC-system with a non-porous anode

文献信息

发布日期 2009-11-09
DOI 10.1039/B916995D
影响因子 38.532
作者

S. Nürnberger, R. Bußar, P. Desclaux, B. Franke, M. Rzepka


查看原文

摘要

The direct carbon fuel cell (DCFC) is a special type of high temperature fuel cell which allows direct conversion of the chemical energy of different carbon materials into electricity. The thermodynamic efficiency of this process is high, and thus the overall conversion efficiency has the potential to exceed these of other fuel cell concepts. Until now the most developed DCFC-systems are based on molten carbonate or hydroxide as electrolyte. In this publication we show that also for a system with a solid electrolyte such as in solid oxide fuel cells (SOFC), which suffers, in principle, from limited contact between the solid fuel and the solid electrolyte, significant conversion rates can be achieved at such interfaces. The principal aspects of the direct electrochemical conversion of carbon powders in an SOFC-system have been investigated in the temperature range of 800 °C to 1000 °C. It has been shown that using a flat planar anode, carbon conversion rates exceeding 100 mA cm−2 are possible. Different solid fuels have been investigated in order to determine the influence of carbon properties on the electrochemical conversion.

相关文献

Electronic state-lifetime interference in resonant Auger spectra: a tool to disentangle overlapping core-excited states

Gildas Goldsztejn, Denis Céolin, Rajesh K. Kushawaha, Ralph Püttner

2016-05-06 Paper

DOI: 10.1039/C6CP01998F

Distribution pattern and allocation of defects in hydrogenated ZnO thin films

Vitaly Gurylev, Chung-Yi Su, Tsong-Pyng Perng

2016-05-12 Paper

DOI: 10.1039/C6CP01768A

Origin of non-linearity in phase solubility: solubilisation by cyclodextrin beyond stoichiometric complexation

Thomas W. J. Nicol, Seishi Shimizu

2016-05-20 Paper

DOI: 10.1039/C6CP01582D

Valley polarization and p-/n-type doping of monolayer WTe2 on top of Fe3O4(111)‡

Yan Song, Qian Zhang, Wenbo Mi, Xiaocha Wang

2016-05-06 Paper

DOI: 10.1039/C6CP01986B

Can betaine pyridinium derivatives be used to control the photoejection of cation?

S. Aloïse, Y. Ruan, I. Hamdi, A. K. Tiwari, G. Buntinx, I. Leray

2016-05-11 Paper

DOI: 10.1039/C6CP01755J

An organosilane self-assembled monolayer incorporated into polymer solar cells enabling interfacial coherence to improve charge transport

Zhiqi Li, Xinyuan Zhang, Zhihui Zhang, Shujun Li, Chunyu Liu, Wenbin Guo, Shengping Ruan

2016-05-17 Paper

DOI: 10.1039/C6CP02722A

您可能还喜欢

化合物问答

什么是3-表南美楝属二醇(CAS号:19942-04-2)?

3-表南美楝属二醇是一种具有特定立体化学结构的化合物,其分子式为C31H52O2,属于甾醇类化合物。它具有光学活性,是一种复杂的有机分子,主要存在于一些植物中。

19942-04-2(3S,5R,8R,9R,10R,13R...
化合物问答

3-羧基-5-碘苯甲酸甲酯(CAS号:50765-22-5)应用于哪些行业?

3-羧基-5-碘苯甲酸甲酯主要应用于医药行业,作为合成某些药物中间体的重要原料。此外,它还可能用于聚合物的改性、传感器的制备以及半导体材料的制备等领域。

50765-22-5Methyl 3-hydroxy-5-i...
化合物问答

什么是3-Bromoindolin-2-one(CAS号:22942-87-6)?

3-Bromoindolin-2-one是一种含有溴代基团的吲哚酮衍生物,分子式为C9H7BrNO。它是一种无色固体,具有一定的挥发性,熔点为158-159°C...

22942-87-63-Bromoindolin-2-one
化合物问答

如何处理含有L-Lysyl-L-phenylalanyl-L-isoleucylglycyl-L-leucyl-L-methioninamide(CAS号:2990-43-4)的废料?

对于含有该化合物的废液,应先进行中和处理,然后根据其毒性和活性选择合适的处置方法。可以考虑焚烧处理或由专业的化学品废物处理公司进行无害化处理。处理过程中需注意环...

2990-43-4L-Lysyl-L-phenylalan...
化合物问答

ANGIOTENSIN 1/2 + A (2 - 8)(CAS号:51833-76-2)的物理化学性质是什么?

ANGIOTENSIN 1/2 + A (2 - 8)是一种蛋白质类化合物,具有典型的蛋白质性质。它的分子量约为5900 Da。该化合物在水中具有一定的溶解性,...

51833-76-2ANGIOTENSIN 1/2 + A ...
化合物问答

如何储存2-甲基硫代嘧啶-5-硼酸频那酯(CAS号:940284-18-4)?

应将该化合物存放在阴凉干燥、通风良好的地方,避免阳光直射。建议将化合物密封保存在避光的、干燥的容器中,远离火源和高温环境。

940284-18-42-(Methylthio)-5-(4,...
化合物问答

什么是苏丹红IV氘代物 标准品(CAS号:1014689-18-9)?

苏丹红IV氘代物 标准品是一种含有氘代标记的苏丹红IV化合物,是一种用于化合物分析、结构确证以及代谢研究的标准物质。

1014689-18-91-[(E)-{2-Methyl-4-[...
化合物问答

(+)-2-Amino-6-propionamido-d3-tetrahydrobenzothiazole(CAS号:1217680-69-7)适用哪些法规指南?

该化合物需要遵循《全球化学品统一分类和标签制度》(GHS)中的分类和标签要求,具体分类需依据其毒性和物理化学性质。此外,还需要符合《欧盟化学品注册、评估、授权和...

1217680-69-7(+)-2-Amino-6-propio...
化合物问答

如何储存2-氨基-2-(2-吡啶)乙酸乙酯(CAS号:55243-15-7)?

2-氨基-2-(2-吡啶)乙酸乙酯应储存于阴凉、干燥、通风良好的环境中,避免高温和光照。应使用密封容器储存,并远离易燃物、氧化剂和其他危险化学品。

55243-15-7Ethyl 2-amino-2-(pyr...
化合物问答

3-羟基-4-甲氧基吡啶-2-羧酸(CAS号:210300-09-7)的主要用途是什么?

3-羟基-4-甲氧基吡啶-2-羧酸主要用于合成其他有机化合物,如药物合成、农药合成和染料合成等。此外,它还可用作中间体和试剂,在化学研究领域也有一定的应用。

210300-09-73-Hydroxy-4-methoxy-...

来源期刊

Energy & Environmental Science

Energy & Environmental Science
CiteScore: 32.34
自引率: 3.4%
年发文量: 481

Energy & Environmental Science is an international journal dedicated to publishing exceptionally important and high quality, agenda-setting research tackling the key global and societal challenges of ensuring the provision of energy and protecting our environment for the future. The scope is intentionally broad and the journal recognises the complexity of issues and challenges relating to energy conversion and storage, alternative fuel technologies and environmental science. For work to be published it must be linked to the energy-environment nexus and be of significant general interest to our community-spanning readership. All scales of studies and analysis, from impactful fundamental advances, to interdisciplinary research across the (bio)chemical, (bio/geo)physical sciences and chemical engineering disciplines are welcomed. Topics include, but are not limited to, the following: Solar energy conversion and photovoltaics Solar fuels and artificial photosynthesis Fuel cells Hydrogen storage and (bio) hydrogen production Materials for energy systems Capture, storage and fate of CO2, including chemicals and fuels from CO2 Catalysis for a variety of feedstocks (for example, oil, gas, coal, biomass and synthesis gas) Biofuels and biorefineries Materials in extreme environments Environmental impacts of energy technologies Global atmospheric chemistry and climate change as related to energy systems Water-energy nexus Energy systems and networks Globally applicable principles of energy policy and techno-economics

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。