Poly(3-dodedyl-2,5-thienylenevinylene)s from the Stille coupling and the Horner–Emmons reaction

文献信息

发布日期 2010-02-11
DOI 10.1039/B9PY00324J
影响因子 5.582
作者

Taina Matos, Rui Li, Jason E. Lewis, Jian Zhang, Xiaomei Jiang


查看原文

摘要

Regioregular (RR) conjugated polymers are critical for electronic and optoelectronic properties of polymer based semiconducting devices. Monosubstituted polythienylvinylene (PTV), a relatively low band-gap conjugated polymer, has been reportedly synthesized using the Stille coupling reaction between 3-dodecyl-2,5-dibromothiophene and (E)-1,2-bis(tributylstannyl)ethylene. Although a small fraction of the product shows good (∼90%) regioregularity, the whole product (S-C12-PTV) consists of mostly unidentified structures. To gain better control of the polymer structure and regioregularity, a difunctionalized C12-thiophene monomer, 3-dodecyl-5-formyl-thiophen-2-ylmethyl)-phosphonic acid diethyl ester, has been polymerized in near quantitative yield via the Horner–Emmons reaction. The full (100%) regioregularity of the resulting polymer (HE-C12-PTV) has been confirmed by its 1H and 13C NMR spectra. The full regioregularity is also reflected in its strong tendency to crystallize and practically no solubility in boiling hexane, in sharp contrast to S-C12-PTV. UV-vis absorption spectroscopy, fluorescence spectroscopy, cyclovoltammetry, thermal analysis (DSC & TGA) and X-ray diffraction have been used to characterize both polymers. UV-vis absorption spectra of the HE-C12-PTV chloroform solutions of different concentrations show well-resolved vibronic structures with an absorption maximum at 577 nm and a prominent shoulder at 614 nm. The optical bandgaps are 1.80 eV in chloroform solution and 1.65 eV in film. The HOMO/LUMO energy levels of the HE-C12-PTV film were found to be at −4.98 eV and −2.88 eV, respectively. The electrochemical bandgap of the polymer in the film is estimated to be 2.1 eV. The DSC curve shows a pronounced melting peak at 205 °C. XRD study shows that a decent crystalline structure is formed without any annealing of the as-cast films.

相关文献

The role of the dihedral angle and excited cation states in ionization and dissociation of mono-halogenated biphenyls; a combined experimental and theoretical coupled cluster study

Michael Barclay, Ragnar Bjornsson, Maicol Cipriani, Andreas Terfort, D. Howard Fairbrother, Oddur Ingólfsson

2019-02-01 Paper

DOI: 10.1039/C8CP07785A

Bismuth oxysulfide film electrodes with giant incident photon-to-current conversion efficiency: the dynamics of properties with deposition time

Evgeny A. Bondarenko, Eugene A. Streltsov, Alexander V. Mazanik, Anatoly I. Kulak, Vytautas Grivickas, Patrik Ščajev, Ekaterina V. Skorb

2018-06-22 Paper

DOI: 10.1039/C8CP03225D

Electron localization in niobium doped CaMnO3 due to the energy difference of electronic states of Mn and Nb

Yi Li, Jian Liu, Ji-Chao Li, Yu-Fei Chen, Xin-Miao Zhang, Xue-Jin Wang, Fu-Ning Wang, Wen-Bin Su, Lan-Ling Zhao, Chun-Lei Wang

2018-07-23 Paper

DOI: 10.1039/C8CP02783H

Gold substrates of controlled roughness and electrokinetic properties formed by nanoparticle deposition

Maria Morga, Małgorzata Nattich-Rak, Magdalena Oćwieja, Zbigniew Adamczyk

2019-02-22 Paper

DOI: 10.1039/C9CP00440H

Contents list

Front/Back Matter

DOI: 10.1039/C9CP90039J

Excitation of singlet–triplet coherences in pairs of nearly-equivalent spins

Christian Bengs, Joseph T. Hill-Cousins, Lynda J. Brown, Richard C. D. Brown, Giuseppe Pileio, Malcolm H. Levitt

2019-02-18 Paper

DOI: 10.1039/C9CP00451C

Experimental and theoretical investigation of long-wavelength fluorescence emission in push–pull benzazoles: intramolecular proton transfer or charge transfer in the excited state?

Guilherme Wiethaus, Josene Maria Toldo, Fabiano da Silveira Santos, Rodrigo da Costa Duarte, Paulo Fernando Bruno Gonçalves, Fabiano Severo Rodembusch

2019-01-28 Paper

DOI: 10.1039/C8CP05186K

您可能还喜欢

化合物问答

(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?

(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。

162174-75-6(3-Aminophenyl)(cycl...
化合物问答

如何储存亚胺菌(CAS号:136470-79-6)?

亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。

136470-79-6Abacavir EP Impurity...
化合物问答

2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?

2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...

354-28-92-Chloro-2,2-difluor...
化合物问答

处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?

在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...

53812-68-34'-Methyl-3-nitro-1,...
化合物问答

(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?

该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。

188690-84-8Benzeneacetic acid, ...
化合物问答

在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?

芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...

1228182-49-7(~2~H_3_)Methyl [5-(...
化合物问答

2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?

2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...

315228-19-42-(2-fluoro-4-nitrop...
化合物问答

2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?

2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...

883531-28-02-Fluoro-4-methoxyph...
化合物问答

什么是4SC 202;4SC202(CAS号:1186222-89-8)?

4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...

1186222-89-8(2E)-N-(2-Aminopheny...
化合物问答

如何储存3,5-二氟苯甲酰胺(CAS号:132980-99-5)?

3,5-二氟苯甲酰胺应储存在阴凉、干燥、通风良好的地方,避免高温和直射阳光。最好使用密封的容器存储,以减少吸湿。

132980-99-53,5-Difluorobenzamid...

来源期刊

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自引率: 7.3%
年发文量: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。