Free radical polymerization of alkyl methacrylates with N,N-dimethylanilinium p-toluenesulfonate at above ambient temperature: a quasi-living system
文献信息
Atanu Kotal, Tapas K. Paira, Sanjib Banerjee, Chinmoy Bhattacharya, Tarun K. Mandal
N,N-Dimethylanilinium p-toluenesulfonate (PTSA-DMA) has been successfully used as a versatile initiator for the quasi-living free radical polymerization of several alkyl methacrylate monomers such as methyl, ethyl, n-butyl, tert-butyl, and benzyl methacrylates (MMA, EMA, n-BuMA, t-BuMA and BzMA respectively) at 60 °C in dry THF. The initiator, PTSA-DMA was prepared by a simple complexation reaction of readily available p-toluenesulfonic acid (PTSA) and N,N-dimethylaniline (DMA). The yield of this polymerization system was moderate to good (60–75%). The produced poly(alkyl methacrylates) had narrow polydispersities (PDIs) (Mw/Mn = 1.16–1.45). Although, this polymerization follows first order kinetics but the obtained molecular weight remains almost unchanged with conversion. This polymerization proceeds through radical mechanism as confirmed by electron paramagnetic resonance spectroscopy. The ‘quasi-living’ nature of this polymerization was verified from the chain extension experiment as well as the successful synthesis of a block copolymer, poly(methyl methacrylate)-b-poly(methyl methacrylate-co-benzyl methacrylate), by the sequential addition of the respective monomers. The obtained block copolymer was characterized by 1H NMR, differential scanning calorimetric and atomic force microscopic studies.
相关文献
Extending the scope of the carbonyl facilitated triplet excited state towards visible light excitation
Shinaj K. Rajagopal, Nagaraj K., Somadrita Deb, Vinayak Bhat, Devika Sasikumar, Ebin Sebastian, Mahesh Hariharan
DOI: 10.1039/C8CP01023D
Three-dimensional auxetic properties in group V–VI binary monolayer crystals X3M2 (X = S, Se; M = N, P, As)
Yan Chen, Xiangbiao Liao, Xiaoyang Shi, Yilun Liu
DOI: 10.1039/C8CP05260C
The maximum occupancy condition for the localized property-optimized orbitals
DOI: 10.1039/C8CP07276K
Significant effects of vibrational excitation of reactant in K + H2 → H + KH reaction based on a new neural network potential energy surface
Jiuchuang Yuan, Zhixin Duan, Shufen Wang, Jianyong Liu, Keli Han
DOI: 10.1039/C8CP03310B
Electron localization in niobium doped CaMnO3 due to the energy difference of electronic states of Mn and Nb
Yi Li, Jian Liu, Ji-Chao Li, Yu-Fei Chen, Xin-Miao Zhang, Xue-Jin Wang, Fu-Ning Wang, Wen-Bin Su, Lan-Ling Zhao, Chun-Lei Wang
DOI: 10.1039/C8CP02783H
Size and shape dependency of the surface energy of metallic nanoparticles: unifying the atomic and thermodynamic approaches
Bastiaan Molleman, Tjisse Hiemstra
DOI: 10.1039/C8CP02346H
Enhancing the electrocatalytic activity of 2H-WS2 for hydrogen evolution via defect engineering
Longfei Wu, Arno J. F. van Hoof, Nelson Y. Dzade, Lu Gao, Heiner Friedrich, Nora H. De Leeuw, Emiel J. M. Hensen, Jan P. Hofmann
DOI: 10.1039/C9CP00722A
Geometry and energetics of CO adsorption on hydroxylated UiO-66
Darren M. Driscoll, Diego Troya, Pavel M. Usov, Andrew J. Maynes, Amanda J. Morris, John R. Morris
DOI: 10.1039/C8CP07778A
Design and characterization of novel polymorphs of single-layered tin-sulfide for direction-dependent thermoelectric applications using first-principles approaches
Bakhtiar Ul Haq, S. AlFaify, A. Laref
DOI: 10.1039/C8CP07645F
Infrared photodissociation spectroscopy of cold cationic trimethylamine complexes
Xiangtao Kong, Zhi Zhao, Dongxu Dai, Xueming Yang, Ling Jiang
DOI: 10.1039/C8CP03672A
您可能还喜欢
(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?
(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。
如何储存亚胺菌(CAS号:136470-79-6)?
亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。
2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?
2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...
处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?
在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...
(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?
该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。
在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?
芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...
2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?
2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...
2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?
2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...
什么是4SC 202;4SC202(CAS号:1186222-89-8)?
4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














