Gradient copolymers of styrene–methyl acrylate and styrene–acrylic acid by organostibine-mediated controlled/living radical polymerization and their glass transition behaviors
文献信息
Jinping Zhang, Jun Li, Liyan Huang, Zhengping Liu
Gradient copolymers of styrene–methyl acrylate (poly(St-grad-MA)) were synthesized by semi-batch organostibine-mediated controlled/living radical polymerization (SBRP) in bulk at 60 °C. The number-average molecular weights of the copolymers increase linearly with the total conversion, and the polydispersity indices of all the final copolymers are less than 1.20. The relationships of the cumulative composition (Fcum) and instantaneous composition (Finst) with the degree of polymerization demonstrate the formation of different gradient chain structure and composition of copolymers. Furthermore, amphiphilic gradient copolymers of styrene–acrylic acid (poly(St-grad-AA)) with a small amount of residual MA units were achieved through the hydrolysis of poly(St-grad-MA) under basic conditions. The glass transition temperature (Tg) behaviours of poly(St-grad-MA) and poly(St-grad-AA) were compared in detail. Tg values of poly(St-grad-MA) increase with increasing Fcum,St, while poly(St-grad-AA) has the maximum Tg value and both the two kinds of copolymers have the maximum Tg breadth values with Fcum,St range of 0.4–0.5. The Tg breadth values of poly(St-grad-AA) copolymers are larger than that of the corresponding poly(St-grad-MA) due to the more strongly segregating components of St–AA than St–MA. The typical wide Tg breadths of all the copolymers further prove their gradient structures.
相关文献
On the calculation of second-order magnetic properties using subsystem approaches in a relativistic framework
Małgorzata Olejniczak, Radovan Bast, André Severo Pereira Gomes
DOI: 10.1039/C6CP08561J
Understanding the influence of low-frequency vibrations on the hydrogen bonds of acetic acid and acetamide dimers
Christopher Copeland, Omkaran Menon, D. Majumdar, Szczepan Roszak, Jerzy Leszczynski
DOI: 10.1039/C7CP04224H
The mechanism of excimer formation: an experimental and theoretical study on the pyrene dimer
Joscha Hoche, Hans-Christian Schmitt, Alexander Humeniuk, Ingo Fischer, Roland Mitrić, Merle I. S. Röhr
DOI: 10.1039/C7CP03990E
Self-aggregation propensity of the Tat peptide revealed by UV-Vis, NMR and MD analyses
Sara Macchi, Riccardo Nifosì, Sebastiano Di Pietro, Claudia Boccardi, Francesca D'Autilia, Fabio Beltram, Francesco Cardarelli
DOI: 10.1039/C7CP04320A
Density functional study on the resistance to sulfur poisoning of Ptx (x = 0, 1, 4 and 8) modified α-Mo2C(0001) surfaces
Weimeng Kong, Xilin Zhang, Jianjun Mao, Xiaopei Xu, Yanxing Zhang
DOI: 10.1039/C7CP04718E
Interfacial engineering of hole transport layers with metal and dielectric nanoparticles for efficient perovskite solar cells
Dian Wang, Kah H. Chan, Naveen Kumar Elumalai, Md. Arafat Mahmud, Mushfika B. Upama, Ashraf Uddin, Supriya Pillai
DOI: 10.1039/C7CP04053A
Two-photon absorption of the spatially confined LiH molecule
Justyna Kozłowska, Marta Chołuj, Robert Zaleśny, Wojciech Bartkowiak
DOI: 10.1039/C6CP07368A
Compositions and structures of niobium oxide cluster ions, NbmOn±, (m = 2–12), revealed by ion mobility mass spectrometry
Jenna W. J. Wu, Ryoichi Moriyama, Keijiro Ohshimo, Fuminori Misaizu
DOI: 10.1039/C7CP04017B
Modelling pH and potential in dynamic structures of the water/Pt(111) interface on the atomic scale
Martin Hangaard Hansen, Anders Nilsson, Jan Rossmeisl
DOI: 10.1039/C7CP03576D
您可能还喜欢
(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?
(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。
如何储存亚胺菌(CAS号:136470-79-6)?
亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。
2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?
2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...
处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?
在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...
(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?
该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。
在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?
芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...
2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?
2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...
2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?
2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...
什么是4SC 202;4SC202(CAS号:1186222-89-8)?
4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.










![4-[(2,4-Dihydroxyphenyl)diazenyl]-5-hydroxy-2,7-naphthalenedisulfonic acid structure 4-[(2,4-Dihydroxyphenyl)diazenyl]-5-hydroxy-2,7-naphthalenedisulfonic acid structure](https://cnstatic.chemtradehub.com/structs/362/3627-01-8-79ac.webp)



