Static and dynamic screening effects in the electrostatic self-assembly of nano-particles
文献信息
V. N. Kuzovkov, E. A. Kotomin
In the description of charge screening in the electrostatic self-assembly of nanoparticles (molecules) embedded into a polar solvent, the static screening effects (a contribution associated with the rapid spatial redistribution of small and highly mobile ions of a solvent) are traditionally treated phenomenologically, using the Yukawa short-range potential for describing the interaction between these particles. However, this model has a limited range of applicability being valid only for infinitely diluted systems and high salt concentrations. During a slow self-assembling process with nanoparticle formation, very dense structural elements (aggregates) are formed, in which the distances between the nanoparticles could become comparable to the Debye radius in the Yukawa potential. For such structural elements dynamic screening effects (the contribution of nanoparticles themselves to the screening potential) become important. In this paper, using a novel integrated approach (nonlinear integro-differential kinetic equations for the correlation functions of particles), we have obtained the self-consistent solution in the 3d case and compared roles of both static (equilibrium) and dynamic (nonequilibrium) charge screening effects in different situations. This paper is a continuation of our recent study [Phys. Chem. Chem. Phys., 2014, 16, 13974], where the polar solvent effects were now taken into account.
相关文献
Does Rashba splitting in CH3NH3PbBr3 arise from 2 × 2 surface reconstruction?
Boubacar Traore, Claudine Katan, Mikaël Kepenekian, Jacky Even
DOI: 10.1039/C8CP00745D
Modelling molecular adsorption on charged or polarized surfaces: a critical flaw in common approaches
Kristof M. Bal, Erik C. Neyts
DOI: 10.1039/C7CP08209F
Pairing-up viologen cations and dications: a microscopic investigation of van der Waals interactions
Christophe Gourlaouen, Sergi Vela, Sylvie Choua, Mathilde Berville, Jennifer A. Wytko, Jean Weiss, Vincent Robert
DOI: 10.1039/C8CP04543G
Gravimetric tank method to evaluate material-enhanced hydrogen storage by physisorbing materials
Artem Iakunkov, Alexey Klechikov, Jinhua Sun, Timothy Steenhaut, Sophie Hermans, Yaroslav Filinchuk, Alexandr Talyzin
DOI: 10.1039/C8CP05241G
Lysine residues control the conformational dynamics of beta 2-glycoprotein I
DOI: 10.1039/C8CP03234C
pH-Induced evolution of surface patterns in micelles assembled from dirhamnolipids: dissipative particle dynamics simulation
Jianchang Xu, Shuangqing Sun, Zhikun Wang, Shiyuan Peng, Songqing Hu, Lijuan Zhang
DOI: 10.1039/C8CP00751A
Simulation of the Raman spectroscopy of multi-layered carbon nanomaterials
Pritesh M. Tailor, Richard J. Wheatley, Nicholas A. Besley
DOI: 10.1039/C8CP05908J
DMPC vesicle structure and dynamics in the presence of low amounts of the saponin aescin
Ramsia Sreij, Carina Dargel, Philippe Geisler, Yvonne Hertle, Aurel Radulescu, Stefano Pasini, Javier Perez, Lara H. Moleiro, Thomas Hellweg
DOI: 10.1039/C7CP08027A
Visible light-triggered fluorescence and pH modulation using metastable-state photoacids and BODIPY
Parth K. Patel, Juan E. Arias, Renan S. Gongora, Aurélien Moncomble, Stéphane Aloïse, Karin Y. Chumbimuni-Torres
DOI: 10.1039/C8CP03977A
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![4-Chloro-3-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridine structure 4-Chloro-3-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridine structure](https://cnstatic.chemtradehub.com/structs/869/869335-75-1-a9d0.webp)

