Dual use of tantalum disulfides as hole and electron extraction layers in organic photovoltaic cells
文献信息
Quyet Van Le, Thang Phan Nguyen, Kyoung Soon Choi, Yoon-Ho Cho, Young Joon Hong, Soo Young Kim
UV/ozone treated (UVO-treated) TaS2 and non-treated TaS2 nanosheets are introduced into organic photovoltaic cells (OPVs) as hole extraction layers (HEL) and electron extraction layers (EEL). TaS2 nanosheets are obtained via ultrasonic vibration and size-controlled by centrifugation. Atomic force microscopy (AFM) images reveal that the thickness and lateral size of TaS2 nanosheets are approximately 1 and 70 nm, indicating that uniform and ultrathin TaS2 nanosheets are obtained. The work function of TaS2 increases from 4.4 eV to 4.9–5.1 eV after applying UVO treatment by forming Ta2O5. In addition, the power conversion efficiencies of normal OPV with UVO-treated TaS2 and inverted OPV with TaS2 are 3.06 and 2.73%, which are higher than those of OPV without TaS2 (1.56% for normal OPV and 0.22% for inverted OPV). These results indicate that TaS2 is a promising material for HEL and EEL layers in OPVs.
相关文献
Comprehensive theoretical study of all 1812 C60 isomers
Rebecca Sure, Andreas Hansen, Peter Schwerdtfeger, Stefan Grimme
DOI: 10.1039/C7CP00735C
Origin of cooperativity in hydrogen bonding
Jorge Nochebuena, Cristina Cuautli, Joel Ireta
DOI: 10.1039/C7CP01695F
Direct folding simulation of helical proteins using an effective polarizable bond force field
Tong Zhu, Qinggang Zhang
DOI: 10.1039/C7CP02101A
Surface-induced assembly of sophorolipids
Jessie Peyre, Marco Faustini, Vincent Humblot, Niki Baccile
DOI: 10.1039/C7CP01339F
Tailoring lanthanide doping in perovskite CaTiO3 for luminescence applications
Bo Tai, Weikang Wu, Feng Wang, Shan Guan, Wei Guo, Yunhao Lu, Shengyuan A. Yang
DOI: 10.1039/C7CP01953J
Oxygen diffusion in ceria doped with rare-earth elements
Johan O. Nilsson, Mikael Leetmaa, Sergei I. Simak
DOI: 10.1039/C6CP06460D
Consequences of changes in the ZnO trap distribution on the performance of dye-sensitized solar cells
J. Falgenhauer, F. Fiehler, C. Richter, M. Rudolph, D. Schlettwein
DOI: 10.1039/C7CP01024A
Correction: Preparation of Mo nanopowders through electroreduction of solid MoS2 in molten KCl–NaCl
Haiping Gao, Mingsheng Tan, Liangbin Rong, Zhiyong Wang, Junjun Peng, Xianbo Jin
DOI: 10.1039/C7CP90125A
Nanostructuring of an alkali halide surface by low temperature plasma exposure
Antoine Hinaut, Baran Eren, Roland Steiner, Sara Freund, Res Jöhr, Thilo Glatzel, Laurent Marot, Ernst Meyer
DOI: 10.1039/C7CP02592K
Prediction of the glass transition temperature and design of phase diagrams of butadiene rubber and styrene–butadiene rubber via molecular dynamics simulations
Myung Shin Ryu, Hyoung Gyu Kim, Hyun You Kim, Kyung-Shin Min, Hak Joo Kim, Hyuck Mo Lee
DOI: 10.1039/C7CP00080D
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![2,6-Bis({(2R)-2-[hydroxy(diphenyl)methyl]-1-pyrrolidinyl}methyl)-4-methylphenol structure 2,6-Bis({(2R)-2-[hydroxy(diphenyl)methyl]-1-pyrrolidinyl}methyl)-4-methylphenol structure](https://cnstatic.chemtradehub.com/structs/877/877395-58-9-70bf.webp)

