Thermoresponsive properties of 3-, 4-, 6-, and 12-armed star-shaped poly[2-(dimethylamino)ethyl methacrylate]s prepared by core-first group transfer polymerization
文献信息
Seiya Kikuchi, Yougen Chen, Keita Fuchise, Kenji Takada, Junsuke Kitakado, Shin-ichiro Sato, Toshifumi Satoh, Toyoji Kakuchi
The t-Bu-P4-catalyzed group transfer polymerization (GTP) of 2-(dimethylamino)ethyl methacrylate (DMAEMA) using multi-functional GTP initiators that bear multiple silyl ketene acetal moieties (MTS3, MTS4, MTS6, and MTS12) homogeneously proceeded and rapidly completed to afford well-defined star-shaped poly[2-(dimethylamino)ethyl methacrylate]s (s-PDMAEMAs) with relatively narrow polydispersities. The molecular weights (MWs) of s-PDMAEMAs were well-controlled by optimizing the molar ratios of the monomer to initiators. For the structural analyses, the arm number and length uniformity of each s-PDMAEMA were then investigated by arm cleavage experiments using a transesterification method. The thermoresponsive properties in an aqueous solution of the resulting s-PDMAEMAs together with their analogous linear PDMAEMAs (l-PDMAEMAs), in terms of polymer concentration, molecular weight, and arm number, were eventually elucidated based on turbidimetry curves.
期刊推荐

Journal of Saudi Chemical Society

Russian Journal of General Chemistry

Russian Journal of Coordination Chemistry

Russian Chemical Bulletin

Russian Journal of Organic Chemistry

Acta Materialia

Chemistry Education Research and Practice

Journal of Peptide Science

Russian Journal of Bioorganic Chemistry

Organic Process Research & Development
相关文献
Selective regression models for the rapid upgrading of raw sugar into 5-HMF bio-fuel additive under a sustainable/reusable system
Panya Maneechakr, Irwan Kurnia, Asep Bayu, Obie Farobie, Chanatip Samart, Suwadee Kongparakul, Guoqing Guan, Surachai Karnjanakom
DOI: 10.1039/D3SE00788J
Valorisation of residual biomass by pyrolysis: influence of process conditions on products
A. C. M. Vilas-Boas, L. A. C. Tarelho, H. S. M. Oliveira, F. G. C. S. Silva, D. T. Pio, M. A. A. Matos
DOI: 10.1039/D3SE01216F
Tailoring flavin-based photosensitizers for efficient photooxidative coupling of benzylic amines
Huimin Guo, Yang Qiu, Siyu Liu, Xiangyu Zhang, Jianzhang Zhao
DOI: 10.1039/D3CP04579J
Development of a QM/MM(ABEEM) method for the deprotonation of neutral and cation radicals in the G-tetrad and GGX(8-oxo-G) tetrad
Yue Wang, Linlin Liu, Yue Gao, Jiayue Zhao, Cui Liu, Lidong Gong, Zhongzhi Yang
DOI: 10.1039/D3CP04357F
Development and test of highly accurate endpoint free energy methods. 3: partition coefficient prediction using a Poisson–Boltzmann method combined with a solvent accessible surface area model for SAMPL challenges
Taoyu Niu, Xibing He, Fengyang Han, Luxuan Wang, Junmei Wang
DOI: 10.1039/D3CP04174C
Silicon nanocrystal hybrid photocatalysts as models to understand solar fuels producing assemblies
Simran S. Saund, Abha Dabak-Wakankar, Melissa K. Gish
DOI: 10.1039/D3SE01512B
Expression of concern: Optimization of a compact layer of TiO2via atomic-layer deposition for high-performance perovskite solar cells
Ahmed Esmail Shalan, Sudhakar Narra, Tomoya Oshikiri, Kosei Ueno, Xu Shi, Hui-Ping Wu, Mahmoud M. Elshanawany, Eric Wei-Guang Diau
DOI: 10.1039/D3SE90087H
Modulating CsPbBr3 nanocrystals encapsulated in PCN-224(Zr) for boosting full-spectrum-driven CO2 reduction: S-scheme transfer, photothermal-synergistic effect, and DFT calculations
Yan-He Chen, Jin-Qiu Shen, Xiao-Lu Chen, Luobing Tang, Na Zhang, Jian-Yong Zhang, Zhen-Jiang Liu
DOI: 10.1039/D3SE01029E
CeO2-supported multi-nuclear NbxSy clusters for hydrogen evolution reaction
Hongxian Liu, Chencheng Zhao, Hong Li, Xuelan Li, Xianfeng Mu, Dunhua Hong, Furu Zhong, Zhenxing Fang, Yanning Zhang
DOI: 10.1039/D3SE01241G
An iron phosphate hydroxide hydrate electrocatalyst: synergistic effects of Fe2+ and Fe3+ for enhanced hydrogen evolution reaction stability
Jeygeerthika Reddy, Vivekanandan Raman, K. K. Viswanathan, Kandasamy Prabakar
DOI: 10.1039/D3SE01488F
您可能还喜欢
4-[4-三氟甲基苯基]恶唑(CAS号:1126636-40-5)通常如何合成?
4-[4-三氟甲基苯基]恶唑通常通过将4-三氟甲基苯酚与异硫氰酸苯酯在有机溶剂中进行酯化反应合成。该反应可在无水条件下,使用适当的催化剂,如四丁基氢氧化铵,以提...
RockPhos Pd G3(CAS号:2009020-38-4)通常如何合成?
RockPhos Pd G3 通常通过钯催化偶联反应合成,使用配体 (2'-Amino-2-biphenylyl)(methanesulfonato-kappa...
1-哌啶甲酰胺(CAS号:2158-03-4)的市场或研究趋势如何?
1-哌啶甲酰胺作为有机合成中的重要中间体,其市场需求主要受医药、农药、染料等行业推动。近年来,随着新药开发和绿色化学的发展,该化合物的研究趋势集中在开发更高效、...
2-(二苯基膦基)乙胺(CAS号:4848-43-5)适用哪些法规指南?
2-(二苯基膦基)乙胺适用于多种法规指南,包括但不限于《全球化学品统一分类和标签制度》(GHS),欧盟《化学品注册、评估、授权和限制》法规(REACH),以及美...
如何储存间苯二甲酸二烯丙酯(CAS号:1087-21-4)?
间苯二甲酸二烯丙酯应储存在阴凉、干燥、通风良好的地方,远离火源和热源。储存容器应密封,避免光照和高温。储存温度应控制在25℃以下,相对湿度应低于80%。避免与其...
什么是间甲苯异硫代异氰酸酯(CAS号:621-30-7)?
间甲苯异硫代异氰酸酯是一种有机化合物,分子式为C7H7NO2S,具有刺激性气味。它是一种重要的有机合成中间体,在合成其他化合物时广泛应用。
在合成中是否有N-Boc-D-苯丙氨醇(CAS号:106454-69-7)的替代品?
在合成中,可以考虑使用N-Cbz-D-苯丙氨醇或N-Fmoc-D-苯丙氨醇作为替代品。这些化合物同样具有保护氨基的功能,且在合成过程中表现出良好的反应性能。
3-羟甲基-2-氧异丙基吡啶(CAS号:954240-50-7)的主要用途是什么?
3-羟甲基-2-氧异丙基吡啶主要用于有机合成领域,可以作为合成其他药物、农药或精细化学品的中间体。此外,它还可能在实验室研究中作为特定反应的前体或溶剂。
6-氨基-9-甲基嘌呤(CAS号:700-00-5)应用于哪些行业?
6-氨基-9-甲基嘌呤目前主要应用于医药行业,作为某些药物的中间体。此外,它还可能用于聚合物、传感器和半导体的某些领域,作为功能性单体或掺杂剂。
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.


![Bis[(1,2,3,4,5-eta)-1-(diphenylphosphino)cyclopentadienyl]iron structure Bis[(1,2,3,4,5-eta)-1-(diphenylphosphino)cyclopentadienyl]iron structure](https://cnstatic.chemtradehub.com/structs/121/12150-46-8-ecd2.webp)

