Poly(2-cycloalkyl-2-oxazoline)s: high melting temperature polymers solely based on Debye and Keesom van der Waals interactions
文献信息
Kathleen Lava, Bart Verbraeken, Richard Hoogenboom
The synthesis of new 2-cycloalkyl-2-oxazoline monomers, namely 2-cyclobutyl (cBuOx), 2-cyclopentyl (cPentOx) and 2-cyclohexyl-2-oxazoline (cHexOx) is described. Their microwave-assisted cationic ring-opening polymerisation allowed the synthesis of well-defined homopolymers. The resulting homopolymers are crystalline and have high chemical resistance to organic solvents. The highest melting point was registered for cPentOx (306 °C), followed by cHexOx (251 °C) and cBuOx (243 °C). The crystal structure of the homopolymers was put into evidence by X-ray diffraction and appeared to be similar to that of the poly(2-isopropyl-2-oxazoline). The absence of any hydrogen bonding or π–π interactions, makes these compounds a special class of high performance polymers which possess high Tm solely based on Debye and Keesom van der Waals interactions of the side-chains. The copolymerization of cPentOx with 2-ethyl-2-oxazoline (EtOx) and cBuOx, respectively are also reported indicating the formation of near ideal random copolymers. Furthermore, the copolymers of cPentOx with cBuOx with compositions in the range from 0 to 100% revealed a linear dependence of melting temperature with the weight fraction of comonomer. For cPentOx-EtOx copolymers containing up to 25 wt% EtOx a linear decrease of the melting temperature with composition was registered, most likely due to the disturbance of the cPentOx crystalline domains. Further, increasing the EtOx wt% revealed a complex non-linear dependence of glass transition temperature on composition, whereby the glass transition temperature of some copolymers was lower than for pure PEtOx.
期刊推荐
相关文献
Operando insights into correlating CO coverage and Cu–Au alloying with the selectivity of Au NP-decorated Cu2O nanocubes during the electrocatalytic CO2 reduction
Clara Rettenmaier, Antonia Herzog, Daniele Casari, Martina Rüscher, Hyo Sang Jeon, David Kordus, Mauricio Lopez Luna, Stefanie Kühl, Uta Hejral, Earl M. Davis, See Wee Chee, Janis Timoshenko, Duncan T.L. Alexander, Arno Bergmann, Beatriz Roldan Cuenya
DOI: 10.1039/D3EY00162H
A unified understanding of magnetorheological elastomers for rapid and extreme stiffness tuning
Ella T. Williams, Nathan Lazarus
DOI: 10.1039/D3LP00109A
Macroporous hydrogels for soil water retention in arid and semi-arid regions
Ryan Zowada, Reza Foudazi
DOI: 10.1039/D3LP00117B
Recent advances in thermogels for the management of diabetic ocular complications
Joey Hui Min Wong, Rubayn Goh
DOI: 10.1039/D3LP00136A
Boosting the catalytic performance of metal–zeolite catalysts in the hydrocracking of polyolefin wastes by optimizing the nanoscale proximity
Xinlei Han, Xinru Zhou, Tuo Ji, Feng Zeng, Weiping Deng, Zhenchen Tang, Rizhi Chen
DOI: 10.1039/D3EY00180F
Polypentenamer thermoplastic elastomers via copolymerization of cyclopentene and dicyclopentadiene
Daniel W. Weller, Robert Halbach, Alexander V. Zabula, Sarah J. Mattler, Xiaodan Gu, Carlos R. López-Barrón
DOI: 10.1039/D3LP00076A
Strengthening ethylene-methacrylic acid ionomers with single-boron-based molecules as cross-linkers in dynamic networking
Peng Wen, Yang Zeng, Lu Zhang, Tao Wang, Jeffrey M. Cogen, Colin Li Pi Shan, Yixuan Liu, Mao Chen
DOI: 10.1039/D3LP00178D
您可能还喜欢
什么是5-Fluoro-4-iodo-2-methylaniline(CAS号:307306-08-7)?
5-氟-4-碘-2-甲氨基苯属于芳香族化合物,其分子式为C8H7FN2I。该化合物具有一定的反应活性,在有机合成和药物化学领域有一定的应用。
4-氟-3-硝基三氟甲苯(CAS号:367-86-2)通常如何合成?
4-氟-3-硝基三氟甲苯通常通过将三氟甲基苯在酸性条件下催化氧化为三氟甲基硝基苯,然后进行氟化反应得到目标化合物。该过程需要使用催化剂,如三氟乙酸,反应产率较高...
6-氯-9-(2,3,5-三苯甲酰氧基-2-C-甲基-beta-D-呋喃核糖基)-9H-嘌呤(CAS号:205171-05-7)的物理化学性质是什么?
该化合物为白色至类白色晶体,分子量约为1046.95。它在水中几乎不溶,在有机溶剂如乙腈和甲醇中具有一定的溶解性。该化合物具有良好的化学稳定性和生物活性。
如何储存6-氟喹啉-4-羧酸(CAS号:220844-73-5)?
6-氟喹啉-4-羧酸应储存在阴凉、干燥、通风良好的地方,避免阳光直射。储存在密闭容器中,避免与空气中的水分接触。储存温度应控制在室温以下,避免高温。
(2S,2'S,3S,3'S)-3,3'-di-tert-butyl-4,4'-bis(2,6-dimethoxyphenyl)-2,2',3,3'-tetrahydro-2,2'-bibenzo[d][1,3]oxaphosphole(CAS号:1435940-21-8)通常如何合成?
该化合物通常通过芳香族化合物的亲核取代反应合成,首先将2,6-二甲氧基苯基引入到双环结构中,然后通过特定条件下的还原或氧化反应引入二叔丁基。反应过程中使用了钯作...
如何储存KY02111(CAS号:1118807-13-8)?
KY02111应储存于阴凉、干燥、通风良好的地方,避免阳光直射和高温环境。应使用合适的密闭容器储存,并确保容器密封良好,防止水分和潮气进入。在储存期间,应注意检...
如何储存4-(4-氯苯氧基)丁酸乙酯(CAS号:59227-79-1)?
4-(4-氯苯氧基)丁酸乙酯应储存在阴凉、干燥、通风良好的地方,远离火源和热源。避免阳光直射,防止容器破裂导致泄漏。储存时应保持容器密封,避免与空气中的水蒸气接...
4-庚基苯乙酮(CAS号:37593-03-6)安全吗?
4-庚基苯乙酮相对安全,但在使用和储存时仍需注意。应避免吸入其蒸气,避免皮肤接触,使用时需佩戴防护眼镜和手套。储存时应远离火源和热源,保持容器密封,放置于阴凉、...
什么是乙基2-氨基-4-(3-溴苯基)噻吩-3-羧酸乙酯(CAS号:438218-48-5)?
乙基2-氨基-4-(3-溴苯基)噻吩-3-羧酸乙酯是一种有机化合物,分子式为C16H12BrN2O2S。它是一种含有噻吩环、氨基、溴苯基和羧酸酯结构的化合物。这...
什么是(9ci)-2-氨基-6-甲基-苯甲酰胺(CAS号:1885-31-0)?
(9ci)-2-氨基-6-甲基-苯甲酰胺是一种化学化合物,其英文名称为2-Amino-6-methylbenzamide,CAS号为1885-31-0。该化合物...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.











![5-Bromoimidazo[1,2-a]pyridine structure 5-Bromoimidazo[1,2-a]pyridine structure](https://cnstatic.chemtradehub.com/structs/692/69214-09-1-d8e2.webp)


