Rapid infrared mapping for highly accurate automated histology in Barrett's oesophagus

文献信息

发布日期 2016-10-03
DOI 10.1039/C6AN01871H
影响因子 4.616
作者

G. R. Lloyd, J. Nallala, M. Isabelle, L. M. Almond, N. A. Shepherd, C. A. Kendall, A. C. Shore, N. Stone


查看原文

摘要

Barrett's oesophagus (BE) is a premalignant condition that can progress to oesophageal adenocarcinoma. Endoscopic surveillance aims to identify potential progression at an early, treatable stage, but generates large numbers of tissue biopsies. Fourier transform infrared (FTIR) mapping was used to develop an automated histology tool for detection of BE and Barrett's neoplasia in tissue biopsies. 22 oesophageal tissue samples were collected from 19 patients. Contiguous frozen tissue sections were taken for pathology review and FTIR imaging. 45 mid-IR images were measured on an Agilent 620 FTIR microscope with an Agilent 670 spectrometer. Each image covering a 140 μm × 140 μm region was measured in 5 minutes, using a 1.1 μm2 pixel size and 64 scans per pixel. Principal component fed linear discriminant analysis was used to build classification models based on spectral differences, which were then tested using leave-one-sample-out cross validation. Key biochemical differences were identified by their spectral signatures: high glycogen content was seen in normal squamous (NSQ) tissue, high glycoprotein content was observed in glandular BE tissue, and high DNA content in dysplasia/adenocarcinoma samples. Classification of normal squamous samples versus ‘abnormal’ samples (any stage of Barrett's) was performed with 100% sensitivity and specificity. Neoplastic Barrett's (dysplasia or adenocarcinoma) was identified with 95.6% sensitivity and 86.4% specificity. Highly accurate pathology classification can be achieved with FTIR measurement of frozen tissue sections in a clinically applicable timeframe.

相关文献

Ligand strain and conformations in a family of Fe(ii) spin crossover hexadentate complexes involving the 2-pyridylmethyl-amino moiety: DFT modelling

Galina S. Matouzenko, Serguei A. Borshch, Volker Schünemann, Juliusz A. Wolny

2013-03-22 Paper

DOI: 10.1039/C3CP44570D

An etched nanoporous Ge anode in a novel metal–air energy conversion cell

Sunghyun Uhm

2013-03-07 Paper

DOI: 10.1039/C3CP50885D

Effective bulk and surface temperatures of the catalyst bed of FT-IR cells used for in situ and operando studies

Haoguang Li, Mickael Rivallan, Frederic Thibault-Starzyk, Arnaud Travert

2013-03-22 Paper

DOI: 10.1039/C3CP50442E

Modeling environment effects on spectroscopies through QM/classical models

Benedetta Mennucci

2013-01-08 Perspective

DOI: 10.1039/C3CP44417A

Chelating ionic liquids for reversible zinc electrochemistry

Mega Kar, Bjorn Winther-Jensen, Maria Forsyth, Douglas R. MacFarlane

2013-03-22 Paper

DOI: 10.1039/C3CP51102B

Combined experimental and theoretical investigation of the hemi-squaraine/TiO2 interface for dye sensitized solar cells

Giancarlo Cicero, Bruno Camino, Stefano Bianco, Anna Maria Ferrari, Barbara Ballarin, Claudia Barolo

2013-03-18 Paper

DOI: 10.1039/C3CP50559F

Photoelectrical properties and the electronic structure of Tl1−xIn1−xSnxSe2 (x = 0, 0.1, 0.2, 0.25) single crystalline alloys

G. E. Davydyuk, H. Kamarudin, G. L. Myronchuk, S. P. Danylchuk, A. O. Fedorchuk, L. V. Piskach, M. Yu. Mozolyuk, O. V. Parasyuk

2013-03-12 Paper

DOI: 10.1039/C3CP50836F

Photovoltaic devices and characterization of a dodecyloxybenzothiadiazole-based copolymer

Purna P. Maharjan, Qiliang Chen, Lianjie Zhang, Olusegun Adebanjo, Nirmal Adhikari, Swaminathan Venkatesan, Prajwal Adhikary, Bjorn Vaagensmith, Qiquan Qiao

2013-03-14 Paper

DOI: 10.1039/C3CP51070K

Modeling CO2reduction on Pt(111)

Chuan Shi, Christopher P. O'Grady, Andrew A. Peterson, Heine A. Hansen

2013-03-19 Paper

DOI: 10.1039/C3CP50645B

On the signature of the hydrophobic effect at a single molecule level

Giuseppe Graziano

2013-03-25 Paper

DOI: 10.1039/C3CP50616A

您可能还喜欢

化合物问答

(5-氨基吡唑-3-基)乙酸(CAS号:174891-10-2)的物理化学性质是什么?

(5-氨基吡唑-3-基)乙酸是一种无色至白色固体,分子量为174.15 g/mol。它在水中具有较好的溶解性,在有机溶剂中的溶解度较低。该化合物具有较好的反应活...

174891-10-2(3-Amino-1H-pyrazol-...
化合物问答

3-氟-4,5-二氯苯胺(CAS号:35754-38-2)适用哪些法规指南?

3-氟-4,5-二氯苯胺受到多项法规指南的约束,包括但不限于GHS(全球化学品统一分类和标签制度)的危险分类标准、欧盟的REACH法规(注册、评估、授权和限制)...

35754-38-23,4-Dichloro-5-fluor...
化合物问答

什么是(R)-(+)-2,2',6,6'-四甲氧基-4,4'-联(二(3,5-二甲苯基基)膦基)-3,3'-二联吡啶(CAS号:442905-33-1)?

这是一种有机化合物,化学名为(R)-(+)-2,2',6,6'-四甲氧基-4,4'-联(二(3,5-二甲苯基基)膦基)-3,3'-二联吡啶,CAS号为44290...

442905-33-14,4'-Bis[bis(3,5-dim...
化合物问答

1-氨基-2-氰基萘(CAS号:3100-67-2)应用于哪些行业?

1-氨基-2-氰基萘在医药、聚合物、传感器和半导体等行业中有应用。在医药领域,它可用作中间体合成某些药物。在聚合物行业,它可以用于制备具有特定性能的聚合物。此外...

3100-67-21-Amino-2-naphthonit...
化合物问答

如何处理含有1-溴-4-(异丙氧基甲基)苯(CAS号:98446-84-5)的废料?

处理含1-溴-4-(异丙氧基甲基)苯的废料时,首先应确保废液收集在防渗漏的容器中,避免泄露。然后,可以考虑采用化学降解法或物理吸附法进行处理。在特定条件下,可通...

98446-84-51-Bromo-4-(isopropox...
化合物问答

6-Chloro-8-(trifluoromethyl)chroman-4-one(CAS号:1344889-75-3)的主要用途是什么?

6-氯-8-三氟甲基-2,3-二氢-4H-色喃-4-酮主要用于有机合成中的中间体,也可作为研究试剂使用。

1344889-75-36-Chloro-8-(trifluor...
化合物问答

7-乙氧基-2-萘酚(CAS号:57944-44-2)通常如何合成?

7-乙氧基-2-萘酚通常通过N-乙氧基化反应合成,首先将2-萘酚与乙醇钠在乙醇中反应生成7-乙氧基-2-萘酚钠盐,再通过酸化进一步得到7-乙氧基-2-萘酚。该合...

57944-44-27-Ethoxy-2-naphthol
化合物问答

4-(1,1-二氧硫代吗啉)丁醇(CAS号:59801-41-1)适用哪些法规指南?

该化合物需遵循一系列的法规指南,包括但不限于GHS全球统一分类和标签制度,其分类可能包括易燃液体和可能危害水生环境。在欧洲,还需遵循REACH法规,确保物质和混...

59801-41-14-(4-Hydroxybutyl)th...
化合物问答

4-甲氧基苄基叠氮甲酸酯(CAS号:25474-85-5)的物理化学性质是什么?

4-甲氧基苄基叠氮甲酸酯是一种无色液体,具有一定的挥发性。其分子量为198.16,熔点为-69°C,沸点为105°C。该化合物在水中溶解度较低,在有机溶剂如乙醇...

25474-85-54-Methoxybenzyl carb...
化合物问答

如何处理含有4-氯-2-氟嘧啶(CAS号:51422-00-5)的废料?

含有4-氯-2-氟嘧啶的废料应按照危险废物处理。首先,应收集并分类这些废料,避免与其他废物混合。然后,可以采用焚烧处理或者交由专业机构进行处置。在处理过程中,需...

51422-00-54-Chloro-2-fluoropyr...

来源期刊

Analyst

Analyst
CiteScore: 7.8
自引率: 5.6%
年发文量: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。