Thermoelectric properties of Ag-doped CuS nanocomposites synthesized by a facile polyol method
文献信息
Tarachand, S. Hussain, N. P. Lalla, Y.-K. Kuo, A. Lakhani, V. G. Sathe, U. Deshpande, G. S. Okram
We report the first thermoelectric properties of Cu1−xAgxS, x = 0–0.75 nanocomposites, synthesized by using a facile polyol method. Systematic characterizations using powder XRD, Rietveld refinement of XRD, EDAX, XPS and Raman spectroscopy confirmed their single phase, hexagonal crystal structure with the space group P63/mmc, nominal elemental composition, valence states of the constituent elements and stoichiometric nature. The TEM images showing the CuS formation of nearly perfect hexagonal disk-like particles of average thickness 26.7 nm and breadth ranging in a few hundreds of nanometers with nanorods stacked from these hexagonal nanodisks (NDs) elongated along the c axis corroborate the FESEM images. Attributed to structural phase transition, an anomaly at 55 K is clearly observed in both the thermopower and Hall resistivity data. By increasing x, a systematic reduction in thermal conductivity was observed near 300 K. Consequently, a 50% enhancement in figure of merit was observed for Cu0.9Ag0.1S as compared to pure CuS at 300 K. These results therefore are expected to provide a new direction in improving ZT near 300 K.
相关文献
Toward the total synthesis of patellazole B: synthesis of an advanced C1–C25 fragment corresponding to the macrocyclic skeleton
Andrew W. Phillips, Matthew J. Anketell, Tudor Balan, Nelson Y. S. Lam, Simon Williams, Ian Paterson
DOI: 10.1039/C8OB01621F
Palladium(ii)-mediated rapid 11C-cyanation of (hetero)arylborons
Zhouen Zhang, Takashi Niwa, Yasuyoshi Watanabe
DOI: 10.1039/C8OB02049C
Tsavoenones A–C: unprecedented polyketides with a 1,7-dioxadispiro[4.0.4.4]tetradecane core from the lichen Parmotrema tsavoense
Mehdi A. Beniddir, Grégory Genta-Jouve, Thammarat Aree, Marylène Chollet-Krugler, Joël Boustie, Solenn Ferron, Aurélie Sauvager, Huu-Hung Nguyen, Kim-Phi-Phung Nguyen, Warinthorn Chavasiri, Pierre Le Pogam
DOI: 10.1039/C8OB01280F
Recent developments in functionalization of acyclic α-keto amides
Alagesan Muthukumar, Subramani Sangeetha, Govindasamy Sekar
DOI: 10.1039/C8OB01423J
I2-Triggered N–O cleavage of ketoxime acetates for the synthesis of 3-(4-pyridyl)indoles
Qinghe Gao, Yakun Wang, Qianqian Wang, Yanping Zhu, Zhaomin Liu, Jixia Zhang
DOI: 10.1039/C8OB02230E
Rationalisation of a mechanism for sensing single point variants in target DNA using anthracene-tagged base discriminating probes
Jean-Louis H. A. Duprey, Dario M. Bassani, Eva I. Hyde, Gediminas Jonusauskas, Christian Ludwig, Alison Rodger, Neil Spencer, Joseph S. Vyle, John Wilkie, Zheng-Yun Zhao, James H. R. Tucker
DOI: 10.1039/C8OB01710G
Synthesis of 2-aminobenzophenones through acylation of anilines with α-oxocarboxylic acids assisted by tert-butyl nitrite
Xinying Zhang, Xuesen Fan
DOI: 10.1039/C8OB01846D
Correction: Chiral NHC-catalyzed 1,3-dipolar [3 + 2] cycloaddition of azomethine imines with α-chloroaldehydes for the synthesis of bicyclic pyrazolidinones
Limin Yang, Yunbo Lv, Fei Wang, Guofu Zhong
DOI: 10.1039/C8OB90095G
Catalytic enantioselective one-pot approach to cis- and trans-2,3-diaryl substituted 1,5-benzothiazepines
Sara Meninno, Ilaria Quaratesi, Chiara Volpe, Andrea Mazzanti, Alessandra Lattanzi
DOI: 10.1039/C8OB01988F
Nazarov cyclisations initiated by DDQ-oxidised pentadienyl ether: a mechanistic investigation from the DFT perspective
Ali Gouranourimi, Antony Chipman, Rasool Babaahmadi, Angus Olding, Brian F. Yates, Alireza Ariafard
DOI: 10.1039/C8OB02590H
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














