Hysteresis and its impact on characterization of mechanical properties of suspended monolayer molybdenum-disulfide sheets

文献信息

发布日期 2019-03-01
DOI 10.1039/C8CP07158F
影响因子 3.676
作者

Haosheng Pang, Peng Huang, Weirong Zhuo, Chenghui Gao, Dan Guo


查看原文

摘要

The hysteresis phenomenon frequently arises in two-dimensional (2D) material nanoindentation, which is generally expected to be excluded from characterizing the elastic properties due to the imperfect elastic behaviour. However, the underlying mechanism of hysteresis and its effect on the characterization of the mechanical properties of 2D materials remain unclear. Cyclic loadings are exerted on the suspended monolayer molybdenum-disulfide (MoS2) films in atomic force microscopy (AFM) nanoindentation experiments. The elastic hysteresis loops are observed for most of the force–displacement curves. The friction/wear between the AFM silicon tip and the MoS2 monolayer is deemed to be dominant compared to the friction between the monolayer and the silicon dioxide substrate after the analysis, as determined using the finite element method (FEM) simulation. The loading force–displacement curves instead of the unloading curves have been used to deduce the elastic mechanical properties using a modified regression equation. The mean value of the obtained Young's modulus of monolayer MoS2, E, is equal to 209 ± 18 GPa, which is close to the inherent stiffness value, predicted by first principles calculation. Our results have confirmed that it is not obligatory to exclude the sample data with hysteresis behaviour for characterizing the elastic properties of 2D materials. In addition, all sample sheets have finally been penetrated and the mean breaking stress value, σmax, is 36.6 ± 0.9 GPa, determined using the radius value of the worn tip. Furthermore, the effect of the loading force and the shape/size of the suspended monolayer MoS2 sheets on the hysteresis behaviour in the 2D nanoindentation have also been analyzed and discussed, exhibiting interesting trends. Our findings provide guidance for the characterization of the mechanical properties of 2D materials using the AFM nanoindentation and the experimental samples with elastic hysteresis behaviour.

相关文献

A novel porous carbon based on diatomaceous earth

S. M. Holmes, B. E. Graniel-Garcia, P. Foran, P. Hill, E. P. L. Roberts, B. H. Sakakini, J. M. Newton

2006-05-17 Communication

DOI: 10.1039/B600708B

Intramolecularcation–π interactions control the conformation of nonrestricted (phenylalkyl)pyridines

Isabella Richter, Jusaku Minari, Philip Axe, John P. Lowe, Tony D. James, Kazuo Sakurai, Steven D. Bull, John S. Fossey

2008-01-08 Communication

DOI: 10.1039/B716937J

Phosphorus–carbon bond formation catalysed by electrophilic N-heterocyclic phosphines

Sebastian Burck, Daniela Förster, Dietrich Gudat

2006-05-31 Communication

DOI: 10.1039/B605278A

Ionic liquids enable electrospray ionisation mass spectrometry in hexane

Matthew A. Henderson, J. Scott McIndoe

2006-06-16 Communication

DOI: 10.1039/B606938J

Direct synthesis of the 1,2,3-[C6H4PPP]− anion, isoelectronic with the indenyl anion [C6H4CHCHCH]−

Felipe García, Robert J. Less, Vesal Naseri, Mary McPartlin, Jeremy M. Rawson, Maria Sancho Tomas, Dominic S. Wright

2008-01-15 Communication

DOI: 10.1039/B718425E

Tin-free radical alkylation of ketonesviaN-silyloxy enamines

Hyun-Ji Song, Che Jo Lim, Sunggi Lee, Sunggak Kim

2006-06-01 Communication

DOI: 10.1039/B606295D

Hydrogen adsorption in microporous hypercrosslinked polymers

Jun-Young Lee, Colin D. Wood, Darren Bradshaw, Matthew J. Rosseinsky, Andrew I. Cooper

2006-05-19 Communication

DOI: 10.1039/B604625H

Front cover

Cover

DOI: 10.1039/B801130N

Diastereoselective diaza-Cope rearrangement reaction

Hyunwoo Kim, Doo Seoung Choi, Cindy Pai-Hui Yen, Alan J. Lough, Choong Eui Song, Jik Chin

2008-01-23 Communication

DOI: 10.1039/B716253G

Highly active iridium(i) complexes for catalytic hydrogen isotope exchange

Jack A. Brown, Stephanie Irvine, Alan R. Kennedy, William J. Kerr, Shalini Andersson, Göran N. Nilsson

2008-01-03 Communication

DOI: 10.1039/B715938B

您可能还喜欢

化合物问答

4,5-二甲基-2-硝基苯甲酸(CAS号:4315-14-4)的市场或研究趋势如何?

4,5-二甲基-2-硝基苯甲酸主要应用于制药、染料和农药等行业。由于其潜在的毒性,其市场趋势可能受到法规限制和环保考量的影响,推动了替代产品的研发。在研究领域,...

4315-14-44,5-Dimethyl-2-nitro...
化合物问答

处理直接黑22(CAS号:6473-13-8)时应注意哪些实验室安全事项?

处理直接黑22时应穿戴适当的个人防护装备(PPE),包括实验服、手套、护目镜和口罩。操作应在通风橱内进行,以避免吸入有害气体。如果发生泄漏,应立即清理,并使用大...

6473-13-82-Naphthalenesulfoni...
化合物问答

处理2,1,3-苯并噻二唑-4-基异氰酸酯(CAS号:342411-14-7)时应注意哪些实验室安全事项?

处理2,1,3-苯并噻二唑-4-基异氰酸酯时应注意以下安全事项:穿戴个人防护装备,如实验室外套、防护眼镜和手套;在通风橱中操作,确保良好的通风;保持实验室环境干...

342411-14-74-Isocyanato-2,1,3-b...
化合物问答

如何处理含有Δ-8,9-脱氢雌酮(CAS号:204077-66-7)的废料?

含有Δ-8,9-脱氢雌酮的废料需要进行适当的处理以确保环境和人体安全。首先,收集废液并存放于密封容器中,避免泄漏。其次,可以考虑将其转化为无害物质或通过专业处理...

204077-66-7Thioquinapiperifil d...
化合物问答

如何储存5-溴戊酸(CAS号:2067-33-6)?

5-溴戊酸应储存在阴凉、干燥、通风良好的环境中,避免阳光直射。建议在室温(约15-25°C)下保存,保持相对湿度低于60%。应使用密封的玻璃或塑料容器,并远离热...

2067-33-65-Bromopentanoic aci...
化合物问答

4-(甲基亚磺酰基)苯胺(CAS号:22865-62-9)应用于哪些行业?

4-(甲基亚磺酰基)苯胺在医药、聚合物和传感器等领域有一定的应用。在医药方面,它可以用作合成药物的中间体;在聚合物领域,可以作为合成特殊性能高分子材料的单体;在...

22865-62-94-Methylsulfinylanil...
化合物问答

什么是1-(2-FLUOROPHENYL)-5-METHYL-1H-PYRAZOLE-4-CARBOHYDRAZIDE(CAS号:618092-58-3)?

1-(2-氟苯基)-5-甲基-1H-吡唑-4-亚甲基肼是一种有机化合物,其分子式为C9H9FN3O。该化合物具有特定的物理化学性质,如熔点、沸点等,但具体值需查...

618092-58-31-(2-Fluorophenyl)-5...
化合物问答

Dauricumine(CAS号:345641-00-1)通常如何合成?

Dauricumine通常通过复杂的合成路线制备,涉及多个步骤,包括环化、氧化、卤化等反应。合成过程中使用了多种催化剂和试剂,例如金属催化剂、氧化剂等。产率通常...

345641-00-1(1R,1'S,5R,6'S,8'S)-...
化合物问答

5-氰基苯酞(CAS号:82104-74-3)安全吗?

5-氰基苯酞在正常使用条件下相对安全,但其具有一定的毒性,需谨慎操作。在实验或工业应用中,应采取适当的防护措施,如佩戴防护手套、护目镜和实验服,确保通风良好。误...

82104-74-31-Oxo-1,3-dihydro-2-...
化合物问答

2-Methyl-1-(phenylsulfonyl)-1H-pyrrolo[2,3-b]pyridin-5-amine(CAS号:1186502-59-9)安全吗?

该化合物在使用时需要谨慎操作。虽然其毒性和健康风险尚未完全明确,但建议在通风良好的环境中操作,并穿戴适当的个人防护装备,如手套和防护眼镜。

1186502-59-92-Methyl-1-(phenylsu...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。