Explaining the optical spectrum of CrF2 and CuF2 model materials: role of the tetragonal to monoclinic instability
文献信息
J. A. Aramburu, M. Moreno
The properties of MF2 (M = Cr, Cu) model compounds are usually interpreted assuming a Jahn–Teller effect leading to elongated MF64− units. By means of the analysis of experimental data and first-principles calculations on both the monoclinic P21/c structure and the parent rutile structure (tetragonal P42/mnm space group), we prove that such an assumption is not correct. It is shown that in MF2 compounds, the MF64− complexes are actually compressed in the parent phase but along a different direction, a situation that is however hidden by an additional orthorhombic instability due to a negative force constant of b2g and b3g modes of the cell. This distortion plays a key role in understanding the high experimental value of the lowest d–d transition energy, E1 = 1.23 and 0.93 eV for CrF2 and CuF2, respectively, when compared to the value E1 = 0.40 eV derived for the Jahn–Teller system of KZnF3:Cu2+. Aside from reproducing reasonably the experimental values of spin allowed d–d transitions of both compounds, our first-principles calculations show the existence of an accidental degeneracy involving the yz and xy levels in the final P21/c structure. Moreover, the internal electric field of CrF2 and CuF2 is found to be much less anisotropic than in layered compounds like K2CuF4 and thus it has little influence on the d–d transition energy. The influence of the (3z2 − r2) − (x2 − y2) hybridization, caused by the orthorhombic distortion, on the electronic density and the magnetic coupling between layers is also briefly discussed. The present results stress that the interpretation of experimental data using simple parameterized models can lead to wrong conclusions.
相关文献
Photoactive rose bengal-based latex via RAFT emulsion polymerization-induced self-assembly
Charlène Boussiron, Mickaël Le Bechec, Julia Sabalot, Sylvie Lacombe, Maud Save
DOI: 10.1039/D0PY01128B
Tacticity, molecular weight, and temporal control by lanthanide triflate-catalyzed stereoselective radical polymerization of acrylamides with an organotellurium chain transfer agent
Yuji Imamura, Takehiro Fujita, Yu Kobayashi, Shigeru Yamago
DOI: 10.1039/D0PY01280G
Preparation of thermoresponsive hydrogels via polymerizable deep eutectic monomer solvents
Yeasmin Nahar, James Horne, Vinh Truong, Alex C. Bissember, Stuart C. Thickett
DOI: 10.1039/D0PY01159B
Self-assembly of rod-coil block copolymers on a substrate into micrometer-scale ordered stripe nanopatterns
Zhengmin Tang, Da Li, Jiaping Lin, Liangshun Zhang, Chunhua Cai, Yuan Yao, Chunming Yang, Xiaohui Tian
DOI: 10.1039/D0PY01404D
Synthesis, aqueous solution behavior and self-assembly of a dual pH/thermo-responsive fluorinated diblock terpolymer
Panagiotis G. Falireas, Vincent Ladmiral, Bruno Ameduri
DOI: 10.1039/D0PY01515F
A covalent organic framework as a photocatalyst for atom transfer radical polymerization under white light irradiation
Xiaoling Fu, Hongjie Yang
DOI: 10.1039/D0PY01545H
Functionalization of polyisoprene and polystyrene via reactive processing using azidoformate grafting agents, and its application to the synthesis of dioxaborolane-based polyisoprene vitrimers
Antoine Breuillac, Florent Caffy, Thomas Vialon, Renaud Nicolaÿ
DOI: 10.1039/D0PY00164C
Correction: Synthesis and properties of block copolymers composed of norbornene/higher α-olefin gradient segments using ansa-fluorenylamidodimethyltitanium-[Ph3C][B(C6F5)4] catalyst system
Haobo Yuan, Takumitsu Kida, Ryo Tanaka, Zhengguo Cai, Yuushou Nakayama, Takeshi Shiono
DOI: 10.1039/D1PY90010B
Iodine-mediated photo-controlled atom transfer radical polymerization (photo-ATRP) and block polymerization combined with ring-opening polymerization (ROP) via a superbase
Mengmeng Li, Sixuan Wang, Feifei Li, Lin Zhou, Lin Lei
DOI: 10.1039/D0PY01031F
Semifluorinated, kinked polyarylenes via direct arylation polycondensation
Fabian Kempe, Felix Riehle, Hartmut Komber, Rukiya Matsidik, Michael Walter, Michael Sommer
DOI: 10.1039/D0PY00973C
您可能还喜欢
硅烷偶联剂ZQ-172(CAS号:1067-53-4)的主要用途是什么?
硅烷偶联剂ZQ-172主要用于增强无机填料与有机高分子材料之间的相容性,常见于橡胶、塑料、涂料和胶黏剂等复合体系中。其硅氧烷基团可与玻璃纤维、二氧化硅等无机物表...
如何处理含有6-(2,4-二甲氧基苯基)-2-吡啶甲醇(CAS号:887981-31-9)的废料?
对于含有该化合物的废料,首先应收集并分类存放,避免与其它化学品混合。在处理前,需进行必要的检测,确定其含量和性质。随后,可以采用化学氧化、生物降解或物理吸附等方...
甲砜霉素甘氨酸酯盐酸盐(CAS号:2611-61-2)的物理化学性质是什么?
该化合物为白色或类白色结晶性粉末,不溶于水,溶于乙醇和氯仿。分子量为403.03 g/mol。它具有手性,含有三个手性中心,分别为2S,3R构型。该化合物在酸性...
如何储存反式-环丙烷-1,2-二胺双盐酸盐(CAS号:3187-76-6)?
反式-环丙烷-1,2-二胺双盐酸盐应存放在阴凉、干燥且通风良好的地方,避免阳光直射。储存容器应密封,以防挥发和受潮。同时,应远离火源和热源,确保储存环境温度不超...
什么是吩嗪硫酸甲酯(CAS号:299-11-6)?
吩嗪硫酸甲酯是一种有机化合物,化学结构由吩嗪环与甲酯基团构成,分子式为C10H9N2SO4。其为吩嗪类衍生物,具有典型的芳香环结构和酯基官能团,常作为氧化剂或染...
N1-异丙基二乙烯三胺(CAS号:207399-20-0)的市场或研究趋势如何?
随着绿色化学和环保意识的提高,N1-异丙基二乙烯三胺的研究趋势正向低毒、环保的方向发展。市场趋势方面,由于其在功能性材料、药物合成等领域的需求,预计其市场需求将...
4,4-Dimethyl-5,6-dihydro-4H-cyclopenta[d][1,3]thiazol-2-amine(CAS号:1182284-47-4)应用于哪些行业?
该化合物在医药、聚合物、传感器和半导体领域有潜在的应用。在医药领域,作为一种新型的噻唑类化合物,它可能具有抗炎、抗病毒等生物活性。在聚合物领域,该化合物可用作增...
处理5-(PYRIDIN-4-YL)-OXAZOL-2-YLAMINE(CAS号:1014629-83-4)时应注意哪些实验室安全事项?
在处理5-(吡啶-4-基)-2-氧代-1-氧杂环己烷-3-胺时,应佩戴防护眼镜、手套和防护服。实验应在通风橱中进行,以避免吸入有害气体。如果发生泄露,应立即用大...
什么是伊托必利N-氧化物(CAS号:141996-98-7)?
伊托必利N-氧化物是一种化学化合物,其分子结构是伊托必利的N位进行氧化处理后的产物。它具有一定的生物活性,主要用于药物研究和开发。
氟氯烟酸(CAS号:82671-06-5)安全吗?
氟氯烟酸属于有机氯化物,具有一定的毒性,需谨慎处理。在操作过程中,应佩戴防护手套、护目镜和实验服,避免吸入其粉尘或蒸汽。接触皮肤或眼睛可能导致刺激,应采取适当的...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














