Tunable electronic properties of the novel g-ZnO/1T-TiS2 vdW heterostructure by electric field and strain: crossovers in bandgap and band alignment types
文献信息
A relatively new and promising method to tune properties of monolayers is by forming a heterostructure of them. Here, the van der Waals heterostructure of graphene-like zinc oxide (g-ZnO) and 1-trigonal titanium disulfide (1T-TiS2) was formed and its structural, electronic, and optical properties were studied in the framework of density functional theory. The dynamical stability of the heterostructure was confirmed based on its phonon band structure. An indirect (Γ → M) bandgap of 0.65 eV, a large built-in electric field (or a large potential drop of 3.12 eV), a type-II (staggered) band alignment, and a large conduction band offset of 2.94 eV were found to form across the interface, which are all desirable for potentially efficient separation of charge carriers. We showed also that the formation of the heterostructure largely enhances the almost-zero optical absorption of g-ZnO in visible and near-infrared regions, which is desirable for optoelectronic applications. By applying a perpendicular electric field, we could tune the bandgap value and the band alignment type (type-II → type-I) of the heterostructure. Finally, we showed that by applying compressive strain, one can change the band alignment type (type-II → type-I) and by applying tensile strain, the bandgap value could be tuned and a crossover occurs in the bandgap type (indirect → direct → indirect).
相关文献
Dynamical modes of two almost identical chemical oscillators connected via both pulsatile and diffusive coupling
DOI: 10.1039/C7CP08032H
Full-dimensional quantum mechanics calculations for the spectroscopic characterization of the isomerization transition states of HOCO/DOCO systems
Dandan Ma, Haisheng Ren, Jianyi Ma
DOI: 10.1039/C7CP07673H
Effect of a single water molecule on the HO2 + ClO reaction
Junyao Li, Narcisse T. Tsona, Lin Du
DOI: 10.1039/C7CP05008A
Modifying bis(triflimide) ionic liquids by dissolving early transition metal carbamates
Cinzia Chiappe, Christian Silvio Pomelli
DOI: 10.1039/C7CP07289A
The effect of aluminum and platinum additives on hydrogen adsorption on mesoporous silicates
Gérôme Melaet, Vitalie Stavila, Lennie Klebanoff
DOI: 10.1039/C7CP07015B
The surprisingly high ligation energy of CO to ruthenium porphyrins
Niloufar Shafizadeh, Séverine Boyé-Péronne, Satchin Soorkia, Barbara K. Cunha de Miranda, Gustavo A. Garcia, Laurent Nahon, Shufeng Chen, Aurélien de la Lande, Lionel Poisson, Benoît Soep
DOI: 10.1039/C8CP01190G
Nanoscale thermal diffusion during the laser interference ablation using femto-, pico-, and nanosecond pulses in silicon
Mindaugas Gedvilas, Simonas Indrišiūnas, Evaldas Stankevičius, Algirdas Selskis, Gediminas Račiukaitis
DOI: 10.1039/C7CP08458G
Time-resolved spectroscopy of the ensembled photoluminescence of nitrogen- and boron/nitrogen-doped carbon dots
Sunghu Kim, Byung-Kuk Yoo, Yuri Choi, Oh-Hoon Kwon
DOI: 10.1039/C8CP01619D
Electro-wetting of a nanoscale water droplet on a polar solid surface in electric fields
Fenhong Song, Long Ma, Jing Fan, Qicheng Chen, Guangping Lei, Ben Q. Li
DOI: 10.1039/C8CP00956B
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![2,6-Bis({(2R)-2-[hydroxy(diphenyl)methyl]-1-pyrrolidinyl}methyl)-4-methylphenol structure 2,6-Bis({(2R)-2-[hydroxy(diphenyl)methyl]-1-pyrrolidinyl}methyl)-4-methylphenol structure](https://cnstatic.chemtradehub.com/structs/877/877395-58-9-70bf.webp)



