Peptide-based delivery vectors with pre-defined geometrical locks
文献信息
Ruchika Goyal, Gaurav Jerath, Aneesh Chandrasekharan, T. R. Santhosh Kumar, Vibin Ramakrishnan
Design of peptide-based targeted delivery vectors with attributes of specificity and selective cellular targeting by fixing their topology and resulting electrostatic fingerprint is the objective of this study. We formulated our peptide design platform by utilizing the possibilities of side-chain induced geometric restrictions in a typical peptide molecule. Conceptually, we locked the conformation of the RGD/NGR motif of tumor homing peptides (THPs) by mutating glycine in these motifs with D-proline and tailed the peptides with a syndiotactic amphipathic segment for cellular penetration. The designed peptides were synthesized, characterized, and tested in vitro on various cell lines, including breast cancer (MDA-MB-231), cervical cancer (HeLa), osteosarcoma (U2-OS) and non-cancer mammary epithelial cells (MCF-10A), by flow cytometry and confocal microscopy. The results showed differential cellular uptake in different cell types, as a result of the distinct electrostatic fingerprint encoded in their design. The uptake of serum pre-treated peptides by cells reveals the retention of peptide activity even after the incubation with serum. In addition, peptide–methotrexate (MTX) conjugates compared to the methotrexate drug showed enhanced apoptotic cell death in MTX-resistant MDA-MB-231 cells, indicating the increase in MTX bioavailability.
相关文献
The effect of nitrogen doping on mercury oxidation/chemical adsorption on the CuCo2O4(110) surface: a molecular-level description
Zhijian Mei, Ruiqing Zhang, Zhemin Shen, Wenhua Wang
DOI: 10.1039/C4CP01362J
Improved performance of a polymer nanogenerator based on silver nanoparticles doped electrospun P(VDF–HFP) nanofibers
Dipankar Mandal, Karsten Henkel, Dieter Schmeißer
DOI: 10.1039/C3CP55238A
Charge carrier mobility in organic molecular materials probed by electromagnetic waves
Shu Seki, Akinori Saeki, Tsuneaki Sakurai, Daisuke Sakamaki
DOI: 10.1039/C4CP00473F
The H + HeH+ → He + H2+ reaction from the ultra-cold regime to the three-body breakup: exact quantum mechanical integral cross sections and rate constants
DOI: 10.1039/C4CP00502C
Electronic structure and spectra of (Cu2O)n–H2O complexes
Jerry Whitten
DOI: 10.1039/C4CP04303K
Optical and electrochemical properties of ethynylaniline derivatives of phenothiazine, phenothiazine-5-oxide and phenothiazine-5,5-dioxide
Kim D. Thériault, Todd C. Sutherland
DOI: 10.1039/C4CP00678J
Ab initio molecular dynamics simulations of water and an excess proton in water confined in carbon nanotubes
Jeffrey K. Clark II, Stephen J. Paddison
DOI: 10.1039/C4CP00415A
Nanoporous dual-electrodes with millimetre extensions: parallelized fabrication and area effects on redox cycling
Martin Hüske
DOI: 10.1039/C4CP01027B
Modification of the surface chemistry of single- and multi-walled carbon nanotubes by HNO3 and H2SO4 hydrothermal oxidation for application in direct contact membrane distillation
Sergio Morales-Torres, Tânia L. S. Silva, Luisa M. Pastrana-Martínez, Ana T. S. C. Brandão, José L. Figueiredo, Adrián M. T. Silva
DOI: 10.1039/C4CP00615A
Fully printable transparent monolithic solid-state dye-sensitized solar cell with mesoscopic indium tin oxide counter electrode
Ying Yang, Kwangho Ri, Yaoguang Rong, Linfeng Liu, Tongfa Liu, Min Hu, Xiong Li, Hongwei Han
DOI: 10.1039/C4CP02354D
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...















