The quantity and type of ILs needed to form magnetic-heteropolyacid mesoporous catalysts and their highly performance for DBT removal
文献信息
Si-Wen Li, Wei Wang, Jian-She Zhao
Magnetic-heteropolyacid mesoporous catalysts, formed through the linkage of an ionic liquid, a magnetic Fe3O4@MCM-41 support, and a heteropolyacid, have been prepared and used in the deep oxidative desulfurization process. When various molar ratios of ionic liquid were introduced into the system, viscosity was shown to be an important factor in determining the ODS efficiency, and 0.4 mL of ionic liquid (MPI-0.4) could achieve the best effects. Also, different types of ionic liquid, with the main difference being the length of the carbon chain, showed varying desulfurization effects. With oxygen in the air as the oxidant, MPI-c (ionic liquid carbon chain length n = 14) proved to demonstrate the perfect desulfurization efficiency in the DBT removal process, not only in model oil but also in real diesel, reaching a removal rate of up to 100% within 60 min. Moreover, it could be recycled at least 15 times under simple external magnetic field separation with no obvious decrease in catalytic performance.
相关文献
Tunable photoluminescence from nc-Si/a-SiNx:H quantum dot thin films prepared by ICP-CVD
Basudeb Sain, Debajyoti Das
DOI: 10.1039/C3CP43875A
Chemically-synthesised, atomically-precise gold clusters deposited and activated on titania
David P. Anderson, Jason F. Alvino, Alexander Gentleman, Hassan Al Qahtani, Lars Thomsen, Matthew I. J. Polson, Gregory F. Metha, Vladimir B. Golovko, Gunther G. Andersson
DOI: 10.1039/C3CP44005B
Probing the balance of attraction and repulsion in binary mixtures of dimethyl sulfoxide and n-alcohols
Andrew Ellis, Florian M. Zehentbauer
DOI: 10.1039/C2CP42902K
Ultrafast dynamics in iron tetracarbonyl olefin complexes investigated with two-dimensional vibrational spectroscopy
Matthijs R. Panman, Arthur C. Newton, Jannie Vos, Bart van den Bosch, Vladica Bocokić, Joost N. H. Reek, Sander Woutersen
DOI: 10.1039/C2CP43565A
Sophorolipids-functionalized iron oxide nanoparticles
Lorenzo Stievano, Inge Van Bogaert
DOI: 10.1039/C2CP41977G
Mutual diffusion in the ternary mixture of water + methanol + ethanol and its binary subsystems
Stanislav Pa, Gabriela Guevara-Carrion, Hans Hasse, Jadran Vrabec
DOI: 10.1039/C3CP43785J
Clarifying the role of sodium in the silica oligomerization reaction
Anna Pavlova, Thuat T. Trinh, Rutger A. van Santen, Evert Jan Meijer
DOI: 10.1039/C2CP42436C
Can hydrate form in carbon dioxide from dissolved water?
Bjørn Kvamme, Tatiana Kuznetsova, Pilvi-Helina Kivelæ, Jordan Bauman
DOI: 10.1039/C2CP43061D
Photoinduced ultrafast dynamics of the triphenylamine-based organic sensitizer D35 on TiO2, ZrO2 and in acetonitrile
Kawon Oum, Peter W. Lohse, Johannes R. Klein, Oliver Flender, Mirko Scholz, Anders Hagfeldt, Gerrit Boschloo, Thomas Lenzer
DOI: 10.1039/C3CP44095H
Electron attachment to the dipeptide dialanine: influence of methylation on site selective dissociation reactions
Benjamin Puschnigg, Stefan E. Huber, Michael Probst, Katrin Tanzer, Violaine Vizcaino, Filipe Ferreira da Silva, Paul Scheier, Paulo Limão-Vieira, Stephan Denifl
DOI: 10.1039/C3CP44230F
您可能还喜欢
4-((4-甲基哌嗪-1-基)甲基)苯硼酸(CAS号:763120-62-3)的市场或研究趋势如何?
随着有机硼化学的发展,该化合物在催化、药物合成、材料科学等领域展现出潜在的应用价值。近年来,其在药物前体合成中的应用越来越受到关注。市场趋势显示,随着科研投入的...
如何储存2,4,5-三甲基-1-硝基苯(CAS号:610-91-3)?
2,4,5-三甲基-1-硝基苯应储存在阴凉、干燥且通风良好的地方,避免阳光直射。储存在密封的金属容器中,远离火源和热源。储存温度应控制在25°C以下,湿度不宜过...
处理2,5-二碘噻吩(CAS号:625-88-7)时应注意哪些实验室安全事项?
在处理2,5-二碘噻吩时,应穿戴适当的个人防护装备(PPE),包括实验室外套、手套和防护眼镜。在通风橱中进行操作以避免吸入蒸气。如果发生泄漏,应立即疏散人员并使...
在合成中是否有6-bromo-3-chloro-1H-indole(CAS号:57916-08-2)的替代品?
在合成6-溴-3-氯-1H-吲哚(CAS号:57916-08-2)时,可以考虑使用一些类似的化合物作为替代品,如6-氯-3-氯-1H-吲哚或3-氯-1H-吲哚,...
在合成中是否有(R)-(-)-1-(1-萘基)乙基异氰酸酯(CAS号:42340-98-7)的替代品?
可以考虑使用类似结构的化合物,如1-[(1R)-1-(2-氨基乙基)萘-1-基]乙基异氰酸酯作为替代品。此外,还可以寻找其他类型的异氰酸酯衍生物,如苯基异氰酸酯...
3-氨基苯甲酰苯胺(CAS号:14315-16-3)适用哪些法规指南?
3-氨基苯甲酰苯胺适用于多项法规指南,包括但不限于GHS(全球化学品统一分类和标签制度)分类为皮肤腐蚀/刺激类别2,以及潜在的皮肤过敏性类别1。在欧盟地区,它受...
β-环柠檬醛-D5(CAS号:26309-95-5)通常如何合成?
β-环柠檬醛-D5可通过不对称合成方法获得。常见的合成路线包括以环己酮为原料,经过选择性氧化、还原、保护基引入等步骤,最终得到目标化合物。该合成过程中通常使用多...
如何处理含有BIO-1211(CAS号:187735-94-0)的废料?
对于含有BIO-1211(CAS号:187735-94-0)的废料,首先应进行分类收集,确保符合环保要求。然后,可以考虑通过焚烧或其他专业处理方法进行处置。在处...
如何处理含有4-氯-2-氟-3-甲基苯酚(CAS号:1351668-24-0)的废料?
含有该化合物的废液应收集至专用容器中,避免与其他化学品混合。可采用焚烧或送交专业废弃物处理公司处理。处理过程中需遵守当地环保法规,确保不产生二次污染。处理前应进...














![(4R,5S,6S)-3-({(3S,5S)-5-[(3-Carboxyphenyl)carbamoyl]-3-pyrrolidinyl}sulfanyl)-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid structure (4R,5S,6S)-3-({(3S,5S)-5-[(3-Carboxyphenyl)carbamoyl]-3-pyrrolidinyl}sulfanyl)-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid structure](https://cnstatic.chemtradehub.com/structs/153/153832-46-3-b2e0.webp)
