Conjugated polymers with controllable interfacial order and energetics enable tunable heterojunctions in organic and colloidal quantum dot photovoltaics
文献信息
Ahmad R. Kirmani, Xinzheng Lan, Joshua Carpenter, Annabel Rong-Hui Chew, Muhammad R. Niazi, Oleksandr Voznyy, Guy Olivier Ngongang Ndjawa, Alberto Salleo, Harald Ade, Edward H. Sargent
Conjugated polymers are widely used as photoactive and transport layers in organic and hybrid photovoltaics (PV), where the energetics of polymers are a key design criterion. Here, we show that significant variations in terminal molecular ordering between top and bottom surfaces of a wide range of conjugated polymer films can result in sizable interfacial ionization energy (IE) differences by as much as 0.33 eV, which has significant impact on organic and hybrid PV devices. Such tunability is surprisingly seen even in nominally amorphous polymers. We devise a strategy leveraging wet and dry laminations to form donor–acceptor planar heterojunction (PHJ) devices using exposed and buried surfaces of donor polymers and demonstrate meaningful influence over the open circuit voltage (VOC) by up to 0.32 V. We use this insight to devise a controlled intermixing approach which yields superior VOC and JSC to conventional bulk heterojunction devices by leveraging the disordered interface to maximize VOC and the greater aggregation of the donor to increase the JSC. We go on to demonstrate how judicious control of polymer surface IE benefits charge extraction in colloidal quantum dot PV devices in the role of hole transport layers. Our results show that polymer interfacial and bulk properties are both critical to the functionality of optoelectronic devices and should both be given prime consideration when designing heterojunction devices.
相关文献
The S1 ← S0 fluorescence excitation spectrum and structure of propanal in the S1 excited electronic state
I. A. Godunov, N. N. Yakovlev, R. V. Terentiev, D. V. Maslov, A. V. Abramenkov
DOI: 10.1039/C6CP02138G
On the gas phase fragmentation of protonated uracil: a statistical perspective
Emilio Martínez-Núñez
DOI: 10.1039/C6CP01657J
Molten fatty acid based microemulsions
Cecile Noirjean, Fabienne Testard, Christophe Dejugnat, Jacques Jestin, David Carriere
DOI: 10.1039/C6CP00533K
Dynamics of intermolecular interactions in CCl4via the isotope effect by femtosecond time-resolved spectroscopy
Jadwiga Konarska, Wojciech Gadomski, Bożena Ratajska-Gadomska, Kamil Polok, Grzegorz Pudłowski, Tomasz M. Kardaś
DOI: 10.1039/C6CP00270F
UV laser photoactivation of hexachloroplatinate bound to individual nucleobases in vacuo as molecular level probes of a model photopharmaceutical
Edward Matthews, Ananya Sen, Naruo Yoshikawa, Ed Bergström, Caroline E. H. Dessent
DOI: 10.1039/C6CP01676F
Ammonia as an efficient catalyst for decomposition of carbonic acid: a quantum chemical investigation
Biman Bandyopadhyay, Partha Biswas, Pradeep Kumar
DOI: 10.1039/C6CP02407F
A computational study of the interaction of graphene structures with biomolecular units
Diego López Carballeira, Nicolás Ramos-Berdullas, Ignacio Pérez-Juste, José Luis Cagide Fajín, M. Natália D. S. Cordeiro, Marcos Mandado
DOI: 10.1039/C6CP00545D
Electrochemical activity and high ionic conductivity of lithium copper pyroborate Li6CuB4O10
Mohamed Ben Hassine
DOI: 10.1039/C6CP01581F
Prediction of the electronic structure of single-walled black phosphorus nanotubes
Lixiu Guan, Guifeng Chen, Junguang Tao
DOI: 10.1039/C6CP01803C
您可能还喜欢
什么是3-表南美楝属二醇(CAS号:19942-04-2)?
3-表南美楝属二醇是一种具有特定立体化学结构的化合物,其分子式为C31H52O2,属于甾醇类化合物。它具有光学活性,是一种复杂的有机分子,主要存在于一些植物中。
3-羧基-5-碘苯甲酸甲酯(CAS号:50765-22-5)应用于哪些行业?
3-羧基-5-碘苯甲酸甲酯主要应用于医药行业,作为合成某些药物中间体的重要原料。此外,它还可能用于聚合物的改性、传感器的制备以及半导体材料的制备等领域。
什么是3-Bromoindolin-2-one(CAS号:22942-87-6)?
3-Bromoindolin-2-one是一种含有溴代基团的吲哚酮衍生物,分子式为C9H7BrNO。它是一种无色固体,具有一定的挥发性,熔点为158-159°C...
如何处理含有L-Lysyl-L-phenylalanyl-L-isoleucylglycyl-L-leucyl-L-methioninamide(CAS号:2990-43-4)的废料?
对于含有该化合物的废液,应先进行中和处理,然后根据其毒性和活性选择合适的处置方法。可以考虑焚烧处理或由专业的化学品废物处理公司进行无害化处理。处理过程中需注意环...
ANGIOTENSIN 1/2 + A (2 - 8)(CAS号:51833-76-2)的物理化学性质是什么?
ANGIOTENSIN 1/2 + A (2 - 8)是一种蛋白质类化合物,具有典型的蛋白质性质。它的分子量约为5900 Da。该化合物在水中具有一定的溶解性,...
如何储存2-甲基硫代嘧啶-5-硼酸频那酯(CAS号:940284-18-4)?
应将该化合物存放在阴凉干燥、通风良好的地方,避免阳光直射。建议将化合物密封保存在避光的、干燥的容器中,远离火源和高温环境。
什么是苏丹红IV氘代物 标准品(CAS号:1014689-18-9)?
苏丹红IV氘代物 标准品是一种含有氘代标记的苏丹红IV化合物,是一种用于化合物分析、结构确证以及代谢研究的标准物质。
(+)-2-Amino-6-propionamido-d3-tetrahydrobenzothiazole(CAS号:1217680-69-7)适用哪些法规指南?
该化合物需要遵循《全球化学品统一分类和标签制度》(GHS)中的分类和标签要求,具体分类需依据其毒性和物理化学性质。此外,还需要符合《欧盟化学品注册、评估、授权和...
如何储存2-氨基-2-(2-吡啶)乙酸乙酯(CAS号:55243-15-7)?
2-氨基-2-(2-吡啶)乙酸乙酯应储存于阴凉、干燥、通风良好的环境中,避免高温和光照。应使用密封容器储存,并远离易燃物、氧化剂和其他危险化学品。
3-羟基-4-甲氧基吡啶-2-羧酸(CAS号:210300-09-7)的主要用途是什么?
3-羟基-4-甲氧基吡啶-2-羧酸主要用于合成其他有机化合物,如药物合成、农药合成和染料合成等。此外,它还可用作中间体和试剂,在化学研究领域也有一定的应用。
来源期刊
Journal of Materials Chemistry A

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry A are listed below. This list is neither exhaustive nor exclusive. Artificial photosynthesis Batteries Carbon dioxide conversion Catalysis Fuel cells Gas capture/separation/storage Green/sustainable materials Hydrogen generation Hydrogen storage Photocatalysis Photovoltaics Self-cleaning materials Self-healing materials Sensors Supercapacitors Thermoelectrics Water splitting Water treatment











![(3S,4aS,8aS)-2-[(2R,3S)-3-Amino-2-hydroxy-4-phenylbutyl]-N-(2-methyl-2-propanyl)decahydro-3-isoquinolinecarboxamide structure (3S,4aS,8aS)-2-[(2R,3S)-3-Amino-2-hydroxy-4-phenylbutyl]-N-(2-methyl-2-propanyl)decahydro-3-isoquinolinecarboxamide structure](https://cnstatic.chemtradehub.com/structs/136/136522-17-3-4d77.webp)


