Kinetic analysis of supported Ni-catalyzed CO2/CH4 reactions using photoacoustic spectroscopy
文献信息
Ji-Woong Kim, Jae-Au Ha, Hun Jung, Byung-II Ahn, Sung-Han Lee, Joong-Gill Choi
CO2 photoacoustic spectroscopy was employed to analyze kinetically the CO2/CH4 reaction catalyzed by 14 wt% Ni/Al2O3 and 14 wt% Ni/TiO2. The catalytic reaction was carried out in the temperature range of 673–923 K at various partial pressures of CO2 and CH4 (40 Torr total pressure) in a closed-circulating reactor system. The CO2 photoacoustic signal, measured by using a differential photoacoustic cell, was recorded as a function of reaction time. Under these conditions, Al2O3 and TiO2 used as supports do not promote the reaction as noted by the lack of changes in the CO2 photoacoustic signal. Reactions run in the presence of H2-reduced supported Ni catalysts are associated with significant time dependent changes in the CO2 photoacoustic signal, while processes carried out in the presence of unreduced catalysts do not. Changes in the CO2 photoacoustic signal at early reaction times provide precise data for the rate of CO2 disappearance. The rate of CO2 disappearance is observed to increase with increasing temperature in the range of 673–923 K. Apparent activation energies for CO2 consumption were calculated to be 15.4 kcal mol−1 for the Ni/Al2O3- and 14.3 kcal mol−1 for the Ni/TiO2-catalyzed reactions. Reaction orders, determined from initial rates of CO2 disappearance at 873 K, were found to be 0.48 in CH4 and 0.45 in CO2 for the Ni/Al2O3-promoted process, and 0.38 in CH4 and 0.32 in CO2 for the Ni/TiO2-catalyzed reaction. The results of this effort were compared with those reported previously and were used to construct a mechanism for the low pressure CO2/CH4 reaction.
相关文献
Oxygen-17 hyperfine structures in the pure rotational spectra of SrO, SnO, BaO, HfO and ThO
Christopher T. Dewberry, Kerry C. Etchison, Garry S. Grubbs II, Robert A. Powoski, Michal M. Serafin, Sean A. Peebles, Stephen A. Cooke
DOI: 10.1039/B712798G
Molecular dynamics study of dicarbollide anions in nitrobenzene solution and at its aqueous interface. Synergistic effect in the Eu(iii) assisted extraction
G. Chevrot, R. Schurhammer, G. Wipff
DOI: 10.1039/B711284J
Molecular magnetic properties of heteroporphyrins: a theoretical analysis‡
Pablo Campomanes, María Isabel Menéndez, Gloria Inés Cárdenas-Jirón, Tomás Luis Sordo
DOI: 10.1039/B709198B
Porphyrin linked poly(pyridyl)-based conjugates as artificial photosynthetic reaction centre models
DOI: 10.1039/B708166A
Spectroelectrochemical responses of thin-film conducting copolymers prepared electrochemically from mixtures of 3,4-ethylenedioxythiophene and 2,2′-bithiophene
Andrew Glidle, Roger J. Mortimer, Karl S. Ryder
DOI: 10.1039/B713018J
您可能还喜欢
4-[4-三氟甲基苯基]恶唑(CAS号:1126636-40-5)通常如何合成?
4-[4-三氟甲基苯基]恶唑通常通过将4-三氟甲基苯酚与异硫氰酸苯酯在有机溶剂中进行酯化反应合成。该反应可在无水条件下,使用适当的催化剂,如四丁基氢氧化铵,以提...
RockPhos Pd G3(CAS号:2009020-38-4)通常如何合成?
RockPhos Pd G3 通常通过钯催化偶联反应合成,使用配体 (2'-Amino-2-biphenylyl)(methanesulfonato-kappa...
1-哌啶甲酰胺(CAS号:2158-03-4)的市场或研究趋势如何?
1-哌啶甲酰胺作为有机合成中的重要中间体,其市场需求主要受医药、农药、染料等行业推动。近年来,随着新药开发和绿色化学的发展,该化合物的研究趋势集中在开发更高效、...
2-(二苯基膦基)乙胺(CAS号:4848-43-5)适用哪些法规指南?
2-(二苯基膦基)乙胺适用于多种法规指南,包括但不限于《全球化学品统一分类和标签制度》(GHS),欧盟《化学品注册、评估、授权和限制》法规(REACH),以及美...
如何储存间苯二甲酸二烯丙酯(CAS号:1087-21-4)?
间苯二甲酸二烯丙酯应储存在阴凉、干燥、通风良好的地方,远离火源和热源。储存容器应密封,避免光照和高温。储存温度应控制在25℃以下,相对湿度应低于80%。避免与其...
什么是间甲苯异硫代异氰酸酯(CAS号:621-30-7)?
间甲苯异硫代异氰酸酯是一种有机化合物,分子式为C7H7NO2S,具有刺激性气味。它是一种重要的有机合成中间体,在合成其他化合物时广泛应用。
在合成中是否有N-Boc-D-苯丙氨醇(CAS号:106454-69-7)的替代品?
在合成中,可以考虑使用N-Cbz-D-苯丙氨醇或N-Fmoc-D-苯丙氨醇作为替代品。这些化合物同样具有保护氨基的功能,且在合成过程中表现出良好的反应性能。
3-羟甲基-2-氧异丙基吡啶(CAS号:954240-50-7)的主要用途是什么?
3-羟甲基-2-氧异丙基吡啶主要用于有机合成领域,可以作为合成其他药物、农药或精细化学品的中间体。此外,它还可能在实验室研究中作为特定反应的前体或溶剂。
6-氨基-9-甲基嘌呤(CAS号:700-00-5)应用于哪些行业?
6-氨基-9-甲基嘌呤目前主要应用于医药行业,作为某些药物的中间体。此外,它还可能用于聚合物、传感器和半导体的某些领域,作为功能性单体或掺杂剂。
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














