Assessment of atomic partial charge schemes for polarisation and charge transfer effects in ionic liquids
文献信息
Jason Rigby, Ekaterina I. Izgorodina
In this work, we assess several popular atomic partial charge schemes with the view of accurately quantifying charge distribution, dipole moments and charge transfer in routinely used ionic liquids (ILs). We investigated a series of ion pairs of imidazolium-based ILs such as [C(1−4)mim]X (where X = Cl, BF4 and NTf2) and ionic clusters of [NMe4][BF4], [C1mim][BF4] and [C1mim]Cl that were composed of two, four and eight ion pairs. Assessed partial charge schemes include restrained electrostatic potentials (RESP) employing ChelpG, Connolly and Geodesic point selection algorithms, as well as density matrix partitioning schemes including Mulliken, Löwdin and Natural Population Analysis (NPA). The quality of charge distribution was analysed using the following criteria: (1) treatment of symmetry identical atoms, (2) invariance of charge in the imidazolium ring with increasing alkyl chain and (3) recalculation to dipole moments as a measure of electronic polarisation. The RESP schemes such as Connolly and Geodesic clearly outperform the ChelpG scheme as well as the density matrix-based schemes for these three criteria. Calculated partial charges reveal that dipole moments were best represented by the RESP schemes and confirmed the presence of charge transfer in ILs to a various degree. The degree of charge transfer was dependent on anions as well as cluster size. In the ion pairs, the chloride anion showed the largest charge transfer, followed by the NTf2 and BF4 anions. In ionic clusters the charge transfer was shown to gradually converge from two to eight ion pairs in the case of the [NMe4][BF4] and [C1mim][BF4] ILs to a value, close to that for corresponding ion pairs. In contrast, charge transfer in the [C1mim]Cl clusters converges to a lower value, showing an unusually strong inter-ionic bond with the chloride anion. NPA charges were found to perform poorly, with near-unity charges being retained on the anions and cations in ion pairs and ionic clusters. Mulliken and Löwdin charges were shown to be highly basis set dependent and unpredictable with marked fluctuations in partial charges and therefore their use for ILs is particularly discouraged. Ability of the partial charge schemes to capture fluctuations in the dipole moment within the ionic clusters was also examined. The Connolly and Geodesic RESP schemes were found to slightly outperform ChelpG. Evidence to suggest that chloride-based ILs might be poor model systems for ILs is also presented.
相关文献
Characterization and assembly investigation of a dodecapeptide hydrolyzed from the crystalline domain of Bombyx mori silk fibroin
Ruiwen Hao, Jinming Zhang, Tao Xu, Lei Huang, Jinrong Yao, Xin Chen, Zhengzhong Shao
DOI: 10.1039/C3PY21096K
Alkoxyamine with reduced homolysis temperature and its application in repeated autonomous self-healing of stiff polymers
Ze Ping Zhang, Min Zhi Rong, Ming Qiu Zhang, Chan'e Yuan
DOI: 10.1039/C3PY00679D
Mechanobiochemistry: harnessing biomacromolecules for force-responsive materials
Johnathan N. Brantley, Constance B. Bailey, Kelly M. Wiggins
DOI: 10.1039/C3PY00001J
Nitrogen-rich diaminotriazine-based porous organic polymers for small gas storage and selective uptake
Wei-Chao Song, Xiao-Kang Xu, Qiang Chen, Zhan-Zhong Zhuang, Xian-He Bu
DOI: 10.1039/C3PY00590A
Surface-initiated RAFT polymerization of sulfobetaine from cellulose membranes to improve hemocompatibility and antibiofouling property
Jiang Yuan, Xiaobo Huang, Pengfei Li, Li Li
DOI: 10.1039/C3PY00565H
Grafting of polyethylene onto graphite oxide sheets: a comparison of two routes
Gregory Martin, Philippe Sonntag, Franck D'Agosto, Christophe Boisson
DOI: 10.1039/C3PY00160A
RAFT copolymerization of alginate-derived macromonomers – synthesis of a well-defined poly(HEMAm)-graft-(1→4)-α-l-guluronan copolymer capable of ionotropic gelation
Ali Ghadban, Eric Reynaud, Marguerite Rinaudo, Luca Albertin
DOI: 10.1039/C3PY00730H
Polymerization of methyl methacrylate by latent pre-catalysts based on CO2-protected N-heterocyclic carbenes
Stefan Naumann, Friedrich Georg Schmidt, Roman Schowner, Wolfgang Frey
DOI: 10.1039/C3PY00073G
Gradient copolymers of styrene–methyl acrylate and styrene–acrylic acid by organostibine-mediated controlled/living radical polymerization and their glass transition behaviors
Jinping Zhang, Jun Li, Liyan Huang, Zhengping Liu
DOI: 10.1039/C3PY00484H
Conjugated polymers with 2,7-linked 3,6-difluorocarbazole as donor unit for high efficiency polymer solar cells
Chun Du, Weiwei Li, Yan Duan, Cuihong Li, Huanli Dong, Jia Zhu, Wenping Hu, Zhishan Bo
DOI: 10.1039/C3PY00177F
您可能还喜欢
(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?
(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。
如何储存亚胺菌(CAS号:136470-79-6)?
亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。
2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?
2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...
处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?
在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...
(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?
该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。
在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?
芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...
2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?
2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...
2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?
2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...
什么是4SC 202;4SC202(CAS号:1186222-89-8)?
4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













![(2E)-4-[(1R,2S,8R,19S,21R)-14-Hydroxy-11-isopropenyl-8,23,23-trimethyl-5-(3-methyl-2-buten-1-yl)-16,20-dioxo-3,7,22-trioxaheptacyclo[17.4.1.1~8,12~.0~2,17~.0~2,21~.0~4,15~.0~6,13~]pentacosa-4(15),5,13
,17-tetraen-21-yl]-2-methyl-2-butenoic acid structure (2E)-4-[(1R,2S,8R,19S,21R)-14-Hydroxy-11-isopropenyl-8,23,23-trimethyl-5-(3-methyl-2-buten-1-yl)-16,20-dioxo-3,7,22-trioxaheptacyclo[17.4.1.1~8,12~.0~2,17~.0~2,21~.0~4,15~.0~6,13~]pentacosa-4(15),5,13
,17-tetraen-21-yl]-2-methyl-2-butenoic acid structure](https://cnstatic.chemtradehub.com/structs/173/173867-04-4-d2d3.webp)
