Suppression of ghost distances in multiple-spin double electron–electron resonance

文献信息

发布日期 2013-02-22
DOI 10.1039/C3CP44462G
影响因子 3.676
作者

Tona von Hagens, Yevhen Polyhach, Muhammad Sajid, Adelheid Godt, Gunnar Jeschke


查看原文

摘要

Distance measurements by pulse electron paramagnetic resonance techniques are increasingly applied to multiple-spin systems. In the double electron–electron resonance experiment, more than two dipolar coupled spins manifest in an increased total modulation depth and in sum and difference dipolar frequency contributions that give rise to additional peaks appearing in the distance distribution, which do not correspond to the real interspin distances of the system and are hence referred to as ghost contributions. These ghost contributions may be so prominent that they might be mistaken for real distance peaks or that real distance peaks shift their position or disappear. We present a simple approximate procedure to suppress ghost distances to a great extent by manipulating the experimentally obtained form factor during data analysis by a simple power scaling with a scaling exponent ζN = 1/(1−N), with N being the number of coupled spins in the system. This approach requires neither further experimental effort nor exact knowledge about labelling and inversion efficiency. This should enable routine application to biological systems. The approach is validated on simulated test cases for up to five spins and applied to synthetic model samples. The suppression of ghost distances with the presented approach works best for symmetric geometries and rigid molecules which, at the same time, are the cases where ghost contributions are most disturbing. The distance distributions obtained by power scaling are consistent with distributions that were obtained with previously obtained alternative approaches and agree, in some cases, strikingly well with the expectations for the true interspin distance distributions.

相关文献

Isolated-alkene-linked porous organic polymers (BIT-POPs): facile synthesis via ROMP and distinguishing overlapping signals in solid-state 13C NMR

Zhi-Hao Zhang, Shan-Qing Peng, Shumeng Chi, Hanyuan Chen, Lei Fan, Yan Liu, Xiaohua Ma, Mu-Hua Huang

2021-11-03 Paper

DOI: 10.1039/D1PY01120K

A sequential ROMP strategy to donor–acceptor di-, tri- and tetra arylenevinylene block copolymers

Venukrishnan Komanduri, Yurachat Janpatompong, Raymundo Marcial-Hernandez, Daniel J. Tate, Michael L. Turner

2021-11-15 Paper

DOI: 10.1039/D1PY01202A

Back cover

2021-12-14 Cover

DOI: 10.1039/D1PY90167B

Back cover

2021-12-07 Cover

DOI: 10.1039/D1PY90164H

An induction period in the pyrolysis of acetylene

Xuejun Xu, Philip D. Pacey

2001-06-21 Paper

DOI: 10.1039/B103216J

Unimolecular decay of the Cl−···CH3Cl complex: Influence of symmetry breaking

S. Schmatz, P. Botschwina

2001-04-27 Paper

DOI: 10.1039/B009879P

Contents list

2021-12-07 Front/Back Matter

DOI: 10.1039/D1PY90163J

您可能还喜欢

化合物问答

什么是5-Fluoro-4-iodo-2-methylaniline(CAS号:307306-08-7)?

5-氟-4-碘-2-甲氨基苯属于芳香族化合物,其分子式为C8H7FN2I。该化合物具有一定的反应活性,在有机合成和药物化学领域有一定的应用。

307306-08-75-Fluoro-4-iodo-2-me...
化合物问答

4-氟-3-硝基三氟甲苯(CAS号:367-86-2)通常如何合成?

4-氟-3-硝基三氟甲苯通常通过将三氟甲基苯在酸性条件下催化氧化为三氟甲基硝基苯,然后进行氟化反应得到目标化合物。该过程需要使用催化剂,如三氟乙酸,反应产率较高...

367-86-21-Fluoro-2-nitro-4-(...
化合物问答

6-氯-9-(2,3,5-三苯甲酰氧基-2-C-甲基-beta-D-呋喃核糖基)-9H-嘌呤(CAS号:205171-05-7)的物理化学性质是什么?

该化合物为白色至类白色晶体,分子量约为1046.95。它在水中几乎不溶,在有机溶剂如乙腈和甲醇中具有一定的溶解性。该化合物具有良好的化学稳定性和生物活性。

205171-05-76-Chloro-9-(2-C-meth...
化合物问答

如何储存6-氟喹啉-4-羧酸(CAS号:220844-73-5)?

6-氟喹啉-4-羧酸应储存在阴凉、干燥、通风良好的地方,避免阳光直射。储存在密闭容器中,避免与空气中的水分接触。储存温度应控制在室温以下,避免高温。

220844-73-56-Fluoroquinoline-4-...
化合物问答

(2S,2'S,3S,3'S)-3,3'-di-tert-butyl-4,4'-bis(2,6-dimethoxyphenyl)-2,2',3,3'-tetrahydro-2,2'-bibenzo[d][1,3]oxaphosphole(CAS号:1435940-21-8)通常如何合成?

该化合物通常通过芳香族化合物的亲核取代反应合成,首先将2,6-二甲氧基苯基引入到双环结构中,然后通过特定条件下的还原或氧化反应引入二叔丁基。反应过程中使用了钯作...

1435940-21-8(2S,2'S,3S,3'S)-4,4'...
化合物问答

如何储存KY02111(CAS号:1118807-13-8)?

KY02111应储存于阴凉、干燥、通风良好的地方,避免阳光直射和高温环境。应使用合适的密闭容器储存,并确保容器密封良好,防止水分和潮气进入。在储存期间,应注意检...

1118807-13-8N-(6-chlorobenzo[d]t...
化合物问答

如何储存4-(4-氯苯氧基)丁酸乙酯(CAS号:59227-79-1)?

4-(4-氯苯氧基)丁酸乙酯应储存在阴凉、干燥、通风良好的地方,远离火源和热源。避免阳光直射,防止容器破裂导致泄漏。储存时应保持容器密封,避免与空气中的水蒸气接...

59227-79-1Ethyl 4-(4-chlorophe...
化合物问答

4-庚基苯乙酮(CAS号:37593-03-6)安全吗?

4-庚基苯乙酮相对安全,但在使用和储存时仍需注意。应避免吸入其蒸气,避免皮肤接触,使用时需佩戴防护眼镜和手套。储存时应远离火源和热源,保持容器密封,放置于阴凉、...

37593-03-61-(4-Heptylphenyl)et...
化合物问答

什么是乙基2-氨基-4-(3-溴苯基)噻吩-3-羧酸乙酯(CAS号:438218-48-5)?

乙基2-氨基-4-(3-溴苯基)噻吩-3-羧酸乙酯是一种有机化合物,分子式为C16H12BrN2O2S。它是一种含有噻吩环、氨基、溴苯基和羧酸酯结构的化合物。这...

438218-48-5ethyl 2-amino-4-(3-b...
化合物问答

什么是(9ci)-2-氨基-6-甲基-苯甲酰胺(CAS号:1885-31-0)?

(9ci)-2-氨基-6-甲基-苯甲酰胺是一种化学化合物,其英文名称为2-Amino-6-methylbenzamide,CAS号为1885-31-0。该化合物...

1885-31-02-Amino-6-methylbenz...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。