The benzoic acid–water complex: a potential atmospheric nucleation precursor studied using microwave spectroscopy and ab initio calculations

文献信息

发布日期 2013-11-28
DOI 10.1039/C3CP54486A
影响因子 3.676
作者

Elijah G. Schnitzler, Wolfgang Jäger


查看原文

摘要

The pure rotational, high-resolution spectrum of the benzoic acid–water complex was measured in the range of 4–14 GHz, using a cavity-based molecular beam Fourier-transform microwave spectrometer. In all, 40 a-type transitions and 2 b-type transitions were measured for benzoic acid–water, and 12 a-type transitions were measured for benzoic acid–D2O. The equilibrium geometry of benzoic acid–water was determined with ab initio calculations, at the B3LYP, M06-2X, and MP2 levels of theory, with the 6-311++G(2df,2pd) basis set. The experimental rotational spectrum is most consistent with the B3LYP-predicted geometry. Narrow splittings were observed in the b-type transitions, and possible tunnelling motions were investigated using the B3LYP/6-311++G(d,p) level of theory. Rotation of the water moiety about the lone electron pair hydrogen-bonded to benzoic acid, across a barrier of 7.0 kJ mol−1, is the most likely cause for the splitting. Wagging of the unbound hydrogen atom of water is barrier-less, and this large amplitude motion results in the absence of c-type transitions. The interaction and spectroscopic dissociation energies calculated using B3LYP and MP2 are in good agreement, but those calculated using M06-2X indicate excess stabilization, possibly due to dispersive interactions being over-estimated. The equilibrium constant of hydration was calculated by statistical thermodynamics, using ab initio results and the experimental rotational constants. This allowed us to estimate the changes in percentage of hydrated benzoic acid with variations in the altitude, region, and season. Using monitoring data from Calgary, Alberta, and the MP2-predicted dissociation energy, a yearly average of 1% of benzoic acid is expected to be present in the form of benzoic acid–water. However, this percentage depends sensitively on the dissociation energy. For example, when using the M06-2X-predicted dissociation energy, we find it increases to 18%.

相关文献

A homospin iron(ii) single chain magnet‡

Szymon W. Przybylak, Floriana Tuna, Simon J. Teat, Richard E. P. Winpenny

2008-02-22 Communication

DOI: 10.1039/B717277J

Use of ionic liquids (ILs) for the IL-anion size-dependent formation of Cr, Mo and W nanoparticles from metal carbonyl M(CO)6 precursors

Engelbert Redel, Ralf Thomann, Christoph Janiak

2008-03-14 Communication

DOI: 10.1039/B718055A

Layer-by-layer assembly of single-charged ions with a rigid polyampholyte

Suobo Zhang, Zhaohui Su

2008-03-14 Communication

DOI: 10.1039/B801784K

Angle-controlled arrangement of single-walled carbon nanotubes solubilised by 8-quinolinol metal chelate derivatives on mica

Kazuyuki Nobusawa, Atsushi Ikeda, Yasunori Tanaka, Mineo Hashizume, Jun-ichi Kikuchi, Michihiro Shirakawa, Tatsuya Kitahara, Norifumi Fujita, Seiji Shinkai

2008-02-26 Communication

DOI: 10.1039/B715960A

A simple method for the containment and purification of filled open-ended single wall carbon nanotubes using C60 molecules

Lidong Shao, Tsung-Wu Lin, Gerard Tobias, Malcolm L. H. Green

2008-03-05 Communication

DOI: 10.1039/B800881G

Contents and Chemical Technology

Front/Back Matter

DOI: 10.1039/B804231B

Remote substituent effects on the photooxygenation of 9,10-diarylanthracenes: strong evidence for polar intermediates

Werner Fudickar, Torsten Linker

2008-02-14 Communication

DOI: 10.1039/B719637G

Chiral dinuclear vanadium(v) catalysts for oxidative coupling of 2-naphthols‡

Shinobu Takizawa, Tomomi Katayama, Chiaki Kameyama, Kiyotaka Onitsuka, Takeyuki Suzuki, Takeshi Yanagida, Tomoji Kawai, Hiroaki Sasai

2008-02-14 Communication

DOI: 10.1039/B717068H

Autonomous propulsion of carbon nanotubes powered by a multienzyme ensemble

Davide Pantarotto, Wesley R. Browne, Ben L. Feringa

2007-11-16 Communication

DOI: 10.1039/B715310D

Self-assembly of a peptide rod–coil: a polyproline rod and a cell-penetrating peptide Tat coil

You-Rim Yoon, Yong-beom Lim, Eunji Lee, Myongsoo Lee

2008-03-11 Communication

DOI: 10.1039/B719868J

您可能还喜欢

化合物问答

(5-氨基吡唑-3-基)乙酸(CAS号:174891-10-2)的物理化学性质是什么?

(5-氨基吡唑-3-基)乙酸是一种无色至白色固体,分子量为174.15 g/mol。它在水中具有较好的溶解性,在有机溶剂中的溶解度较低。该化合物具有较好的反应活...

174891-10-2(3-Amino-1H-pyrazol-...
化合物问答

3-氟-4,5-二氯苯胺(CAS号:35754-38-2)适用哪些法规指南?

3-氟-4,5-二氯苯胺受到多项法规指南的约束,包括但不限于GHS(全球化学品统一分类和标签制度)的危险分类标准、欧盟的REACH法规(注册、评估、授权和限制)...

35754-38-23,4-Dichloro-5-fluor...
化合物问答

什么是(R)-(+)-2,2',6,6'-四甲氧基-4,4'-联(二(3,5-二甲苯基基)膦基)-3,3'-二联吡啶(CAS号:442905-33-1)?

这是一种有机化合物,化学名为(R)-(+)-2,2',6,6'-四甲氧基-4,4'-联(二(3,5-二甲苯基基)膦基)-3,3'-二联吡啶,CAS号为44290...

442905-33-14,4'-Bis[bis(3,5-dim...
化合物问答

1-氨基-2-氰基萘(CAS号:3100-67-2)应用于哪些行业?

1-氨基-2-氰基萘在医药、聚合物、传感器和半导体等行业中有应用。在医药领域,它可用作中间体合成某些药物。在聚合物行业,它可以用于制备具有特定性能的聚合物。此外...

3100-67-21-Amino-2-naphthonit...
化合物问答

如何处理含有1-溴-4-(异丙氧基甲基)苯(CAS号:98446-84-5)的废料?

处理含1-溴-4-(异丙氧基甲基)苯的废料时,首先应确保废液收集在防渗漏的容器中,避免泄露。然后,可以考虑采用化学降解法或物理吸附法进行处理。在特定条件下,可通...

98446-84-51-Bromo-4-(isopropox...
化合物问答

6-Chloro-8-(trifluoromethyl)chroman-4-one(CAS号:1344889-75-3)的主要用途是什么?

6-氯-8-三氟甲基-2,3-二氢-4H-色喃-4-酮主要用于有机合成中的中间体,也可作为研究试剂使用。

1344889-75-36-Chloro-8-(trifluor...
化合物问答

7-乙氧基-2-萘酚(CAS号:57944-44-2)通常如何合成?

7-乙氧基-2-萘酚通常通过N-乙氧基化反应合成,首先将2-萘酚与乙醇钠在乙醇中反应生成7-乙氧基-2-萘酚钠盐,再通过酸化进一步得到7-乙氧基-2-萘酚。该合...

57944-44-27-Ethoxy-2-naphthol
化合物问答

4-(1,1-二氧硫代吗啉)丁醇(CAS号:59801-41-1)适用哪些法规指南?

该化合物需遵循一系列的法规指南,包括但不限于GHS全球统一分类和标签制度,其分类可能包括易燃液体和可能危害水生环境。在欧洲,还需遵循REACH法规,确保物质和混...

59801-41-14-(4-Hydroxybutyl)th...
化合物问答

4-甲氧基苄基叠氮甲酸酯(CAS号:25474-85-5)的物理化学性质是什么?

4-甲氧基苄基叠氮甲酸酯是一种无色液体,具有一定的挥发性。其分子量为198.16,熔点为-69°C,沸点为105°C。该化合物在水中溶解度较低,在有机溶剂如乙醇...

25474-85-54-Methoxybenzyl carb...
化合物问答

如何处理含有4-氯-2-氟嘧啶(CAS号:51422-00-5)的废料?

含有4-氯-2-氟嘧啶的废料应按照危险废物处理。首先,应收集并分类这些废料,避免与其他废物混合。然后,可以采用焚烧处理或者交由专业机构进行处置。在处理过程中,需...

51422-00-54-Chloro-2-fluoropyr...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。