Spectroscopic and microscopic studies of self-assembled nc-Si/a-SiC thin films grown by low pressure high density spontaneous plasma processing

文献信息

发布日期 2014-10-03
DOI 10.1039/C4CP03374D
影响因子 3.676
作者

Debajyoti Das, Debjit Kar


查看原文

摘要

In view of suitable applications in the window layer of nc-Si p-i-n solar cells in superstrate configuration, the growth of nc-Si/a-SiC composite films was studied, considering the trade-off relation between individual characteristics of its a-SiC component to provide a wide optical-gap and electrically conducting nc-Si component to simultaneously retain enough crystalline linkages to facilitate proper crystallization to the i-nc-Si absorber-layer during its subsequent growth. Self-assembled nc-Si/a-SiC thin films were spontaneously grown by low-pressure planar inductively coupled plasma CVD, operating in electromagnetic mode, providing high atomic-H density. Spectroscopic simulations of ellipsometry and Raman data, and systematic chemical and structural analysis by XPS, TEM, SEM and AFM were performed. Corresponding to optimized inclusion of C essentially incorporated as Si–C bonds in the network, the optical-gap of the a-SiC component widened, void fraction including the incubation layer thickness reduced. While the bulk crystallinity decreased only marginally, Si-ncs diminished in size with narrower distribution and increased number density. With enhanced C-incorporation, formation of C–C bonds in abundance deteriorates the Si continuous bonding network and persuades growth of an amorphous dominated silicon-carbon heterostructure containing high-density tiny Si-ncs. Stimulated nanocrystallization identified in the Si-network, induced by a limited amount of carbon incorporation, makes the material most suitable for applications in nc-Si solar cells. The novelty of the present work is to enable spontaneous growth of self-assembled superior quality nc-Si/a-SiC thin films and simultaneous spectroscopic simulation-based optimization of properties for utilization in devices.

相关文献

Factors affecting bubble size in ionic liquids

Stuart A. Brittle, Pratik Desai, William A. Zimmerman

2017-05-16 Paper

DOI: 10.1039/C7CP01725A

Anisotropic thermal expansion of SnSe from first-principles calculations based on Grüneisen's theory

Gang Liu, Jian Zhou, Hui Wang

2017-05-15 Paper

DOI: 10.1039/C7CP00815E

Dissection of H-bonding interactions in a glycolic acid–water dimer

Dan Shen, Zhen Tang, Wei Wu, Peifeng Su, Yong Xia, Zhijun Yang, Carl O. Trindle

2017-05-03 Paper

DOI: 10.1039/C7CP02234D

A vacuum ultraviolet photoionization study on high-temperature decomposition of JP-10 (exo-tetrahydrodicyclopentadiene)

Long Zhao, Tao Yang, Ralf I. Kaiser, Tyler P. Troy, Bo Xu, Musahid Ahmed, Juan Alarcon, Daniel Belisario-Lara, Alexander M. Mebel, Yan Zhang, Chuangchuang Cao, Jiabiao Zou

2017-05-05 Paper

DOI: 10.1039/C7CP01571B

Isomerization versus dissociation of phenylalanylglycyltryptophan radical cations

Xiaoyan Mu, Alan C. Hopkinson, Ivan K. Chu

2017-06-09 Paper

DOI: 10.1039/C7CP02355C

Investigation of the relationship between the cycle performance and the electronic structure in LiAlxMn2−xO4 (x = 0 and 0.2) using soft X-ray spectroscopy

Daisuke Asakura, Yusuke Nanba, Yuki Makinose, Hirofumi Matsuda, Eiji Hosono

2017-05-25 Paper

DOI: 10.1039/C7CP02070H

Comprehensive theoretical study of all 1812 C60 isomers

Rebecca Sure, Andreas Hansen, Peter Schwerdtfeger, Stefan Grimme

2017-05-18 Paper

DOI: 10.1039/C7CP00735C

您可能还喜欢

化合物问答

3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?

3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...

26029-52-71-(Difluoromethyl)-3...
化合物问答

3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?

3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...

108-69-03,5-Dimethylaniline
化合物问答

3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?

3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...

24340-76-93-Methyl-1,2-thiazol...
化合物问答

3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?

3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...

135531-86-13-(1,3-Thiazol-2-yl)...
化合物问答

4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?

4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。

85510-82-34-Bromo-1-(chloromet...
化合物问答

处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?

处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...

220497-90-5N-[(9H-Fluoren-9-ylm...
化合物问答

氮化硅(CAS号:12033-89-5)通常如何合成?

氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...

12033-89-5Trisilicon tetranitr...
化合物问答

Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?

Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...

1000690-91-4{4-[(4-Chlorophenyl)...
化合物问答

如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?

1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。

3509-15-71-Piperidin-4-ylbuta...
化合物问答

如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?

含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...

1000023-04-02-[2-Chloro-4-(trifl...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。