Nonadiabatic Renner–Teller quantum dynamics of OH(X2Π) + H+ reactive collisions

文献信息

发布日期 2017-01-09
DOI 10.1039/C6CP07756K
影响因子 3.676
作者

Pablo Gamallo, Sinan Akpinar, Paolo Defazio, Carlo Petrongolo


查看原文

摘要

Following previous studies on the O(3P) + H2+(X2Σg+) collisions, we present the nonadiabatic quantum dynamics of the reactions OH(X2Π) + H′+ → OH′(X2Π) + H+, exchange (e), → OH+(X3Σ−) + H′(2S), quenching (q), and → OH′+ (X3Σ−) + H(2S), exchange-quenching (eq). The reactants and products correlate via the ground 2A′′ and first excited Ã2A′ electronic states of OH2+, which are the degenerate components of linear 2Π species. Therefore, they are strongly perturbed by nonadiabatic Renner—Teller (RT) effects, opening the (q) and (eq) channels that are closed in the Born–Oppenheimer approximation. Using accurate potential energy surfaces (PESs) and RT matrix elements, initial-state-resolved reaction probabilities, real-time dynamics, cross sections, and rate constants of the product channels are obtained through the time-dependent real wavepacket (WP) method and full coupled-channel calculations. Owing to the nonadiabatic couplings, the WP jumps from the excited Ã2A′ surface to the 2A′′ ground PES, avoiding any barrier, opening the quenching channels, and giving many collision complexes into the deep minima of both PESs, as it is clearly shown by the oscillations of the reaction probabilities and by the time-dependent WP dynamics. All the results show that the nonadiabatic-RT channels (q) and (eq) are highly reactive, much more than the adiabatic one (e), pointing out large RT effects. The reactivity of the quenching channels is similar, accounting for 97% of the overall reactivity. In fact, the maximum values of the (q) and (eq) cross sections σq and σeq are equal to 31.6 Å2, whereas the maximum σe value equals 1.34 Å2, and the maximum values of the rate constants kq, keq, and ke are 2.07 × 10−10, 2.45 × 10−10, and 0.23 × 10−10 cm3 s−1. Some calculations show that the centrifugal-sudden and the truncated coupled-channel approximations cannot be employed for the (q) channel. After a sharp increase at the threshold, σq and σeq decrease at larger collision energies while σe and the rate constants depend slightly on the collision energy and temperature, respectively. These findings are consistent with the barrierless nature of both PESs and the exoergicity of the quenching products, with the small role played by the centrifugal and RT barriers in the reactant channel, and with the large RT couplings in the OH2+ intermediates. Finally, we contrast the present results with those for the opposite reactions O + H2+ and for the nonadiabatic-induced quenchings NH + H′ and OH + H′.

相关文献

Front cover

2021-06-22 Cover

DOI: 10.1039/D1PY90085D

Contents list

2021-04-20 Front/Back Matter

DOI: 10.1039/D1PY90056K

A pillar[5]arene-based 3D polymer network for efficient iodine capture in aqueous solution

Jiajun Cao, Huangtianzhi Zhu, Liqing Shangguan, Yuezhou Liu, Peiren Liu, Qi Li, Yitao Wu

2021-05-27 Communication

DOI: 10.1039/D1PY00535A

Organic–inorganic nanohybrids based on an AIE luminogen-functional polymer and CdTe/ZnS QDs: morphologies, optical properties, and applications

Bingfeng Shi, Jianhua Lü, Ying Liu, Yang Xiao, Changli Lü

2021-06-02 Paper

DOI: 10.1039/D1PY00308A

Heterobimetallic Au(i)/Y(iii) single chain nanoparticles as recyclable homogenous catalysts

Josina L. Bohlen, Bragavie Kulendran, Hannah Rothfuss, Peter W. Roesky

2021-06-28 Paper

DOI: 10.1039/D1PY00552A

Photo cleavable thioacetal block copolymers for controlled release

Yongjun Men, Tobias G. Brevé, Antonia G. Denkova, Rienk Eelkema

2021-06-08 Paper

DOI: 10.1039/D1PY00514F

Correlations of nanoscale film morphologies and topological confinement of three-armed cage block copolymers

Brian J. Ree, Yusuke Satoh, Takuya Isono, Toshifumi Satoh

2021-05-25 Paper

DOI: 10.1039/D1PY00421B

Toughened PLA-b-PCL-b-PLA triblock copolymer based biomaterials: effect of self-assembled nanostructure and stereocomplexation on the mechanical properties

Neha Mulchandani, Kazunari Masutani, Sachin Kumar, Hideki Yamane, Yoshiharu Kimura, Vimal Katiyar

2021-06-18 Paper

DOI: 10.1039/D1PY00429H

Contents list

2021-04-13 Front/Back Matter

DOI: 10.1039/D1PY90052H

Improved enantioselectivity in thiol–ene photopolymerization of sulphur-containing polymers with circularly polarized luminescence

Chen-Lu He, Zeyu Feng, Yan Li, Manman Zhou, Liyang Zhao, Sizhen Shan, Mengqiao Wang, Xin Chen, Xi-Sheng Wang, Gang Zou

2021-03-31 Paper

DOI: 10.1039/D1PY00082A

您可能还喜欢

化合物问答

6-氯-2H-1,4-苯并噁嗪-3(4H)-酮(CAS号:7652-29-1)应用于哪些行业?

6-氯-2H-1,4-苯并噁嗪-3(4H)-酮主要应用于医药、农药和聚合物等领域。在医药领域,该化合物可用于合成抗菌药物;在农药领域,可用作杀虫剂的中间体;在聚...

7652-29-16-Chloro-2H-1,4-benz...
化合物问答

活性氧化铝(CAS号:1302-74-5)应用于哪些行业?

活性氧化铝广泛应用于医药、聚合物、传感器、半导体和催化等领域。在医药行业,活性氧化铝用作吸附剂和干燥剂,有助于去除杂质和水分。在聚合物行业,它用作增白剂和抗结块...

1302-74-5aluminum;trihydrate
化合物问答

什么是硅胶(CAS号:112926-00-8)?

硅胶(Silica gel, pptd.,cryst.-free)是一种无定形、多孔的硅酸盐材料,主要成分为二氧化硅(SiO₂)。其结构由硅氧四面体构成,通过酸...

112926-00-8Silica gel, pptd.,cr...
化合物问答

二乙基甲基一氢硅烷(CAS号:760-32-7)的主要用途是什么?

二乙基甲基一氢硅烷主要用于有机合成、表面处理以及作为溶剂。它还被用作合成其他硅烷化合物的原料,以及在涂料、粘合剂和密封剂中的应用。

760-32-7Diethyl(methyl)silan...
化合物问答

在合成中是否有N-花生四烯酰基甘氨酸(CAS号:179113-91-8)的替代品?

在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如N-亚油酰基甘氨酸或N-花生二烯酰基甘氨酸。这些替代品在结构上有类似的双键位置,但可能具有不同的物理化...

179113-91-8Glycine, N-[(5Z,8Z,1...
化合物问答

在合成中是否有1-(4-甲氧基苯基)丙烷-1,2-二酮(CAS号:10557-27-4)的替代品?

在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如1-(3-甲氧基苯基)丙烷-1,2-二酮或1-(4-羟基苯基)丙烷-1,2-二酮。这些替代品具有相似的...

10557-27-41-(4-Methoxyphenyl)p...
化合物问答

N-(4-氨基-1-苄基-3-羟基-5-苯基戊基)-3-甲基-2-(2-氧代四氢嘧啶-1-基)-丁酰胺 5-氧代吡咯烷-2-甲酸(CAS号:192726-06-0)通常如何合成?

该化合物通常通过一系列复杂的有机合成步骤获得。首先,通过芳香族化合物的羟基化反应获得羟基化产物,然后通过酰化反应形成酰胺中间体,最后通过环化反应得到目标产物。常...

192726-06-05-Oxo-L-proline - (2...
化合物问答

(S)-2-氨基-3-喹啉-2-丙酸(CAS号:161513-46-8)的市场或研究趋势如何?

该化合物作为生物活性化合物,尤其是在药物化学领域表现出色。近年来,随着对新型抗炎、抗病毒和抗癌药物的研究增加,其市场和研究趋势持续增长。此外,其在神经科学领域的...

161513-46-8(S)-2-Amino-3-quinol...
化合物问答

核黄素磷酸钠(CAS号:130-40-5)安全吗?

核黄素磷酸钠在常规使用条件下安全,但高剂量可能引起刺激性反应。操作时需佩戴防护手套和护目镜,避免吸入粉尘。若接触皮肤或眼睛,应立即用大量清水冲洗。急救时需根据接...

130-40-5Sodium 1-deoxy-1-(7,...
化合物问答

盐酸丙胺卡因杂质A(EP) 标准品(CAS号:19281-31-3)通常如何合成?

盐酸丙胺卡因杂质A(EP) 标准品可通过重氮化反应和随后的酰胺化反应合成。首先,利用氯化反应将苯环上的氢原子转化为氯原子,然后通过芳香族重氮化反应引入氨基,最后...

19281-31-32-Chloro-N-(2-methyl...

来源期刊

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自引率: 10.3%
年发文量: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

推荐化合物

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。