Studies on the hard confinement effect on the RAFT polymerization of a monomeric ionic liquid. Unexpected triggering of RAFT polymerization at 30 °C
文献信息
Karol Erfurt, Anna Chrobok, Andrzej Zięba, Rafał Bielas
For the first time, the RAFT polymerization of a monomeric ionic liquid under hard confinement was successfully carried out. Consequently, macromolecules with well-defined chemical structures and narrow molecular weight distributions were obtained. Additionally, we reported the unique possibility of triggering RAFT polymerization at 30 °C. This novel strategy open alternative routes to the easy and simple manufacturing of polymers with defined geometries and highly specific properties according to our desired purpose, i.e., in industrial application as biosensors and electronic and electrical nanodevices.
期刊推荐

Science Progress

Israel Journal of Chemistry

Proceedings of the National Academy of Sciences of the United States of America

Molecular Pharmacology

Journal of Catalysis

European Journal of Wood and Wood Products

Journal of Physics and Chemistry of Solids

Journal of Heterocyclic Chemistry

Pharmacological Reviews

Organic Preparations and Procedures International
相关文献
Spectroscopic evidence for adsorption-induced polymerisation of terthiophene at silver surfaces
Giuseppe Compagnini, Angela De Bonis, Rosario S. Cataliotti, Giovanni Marletta
DOI: 10.1039/B005892K
Temperature-dependent self-diffusion coefficients of water and six selected molecular liquids for calibration in accurate 1H NMRPFG measurements
Manfred Holz, Stefan R. Heil, Antonio Sacco
DOI: 10.1039/B005319H
n-Alkyl alcohols at the water/vapour and water/benzene interfaces: a study on phase transfer energies
Luca Frediani, Christian S. Pomelli, Jacopo Tomasi
DOI: 10.1039/B004330N
Direct visualisation of micelles of Pluronic block copolymers in aqueous solution by cryo-TEM
DOI: 10.1039/A902369K
Spectroscopic properties of Mg-chlorin, Mg-porphin and chlorophyllsa, b, c1, c2, c3 and d studied by semi-empirical and ab initio MO/CI methods
Juha Linnanto, Jouko Korppi-Tommola
DOI: 10.1039/B004998K
Effect of defect clustering on the high-pressure behaviour of wüstite. High-pressure X-ray diffraction and lattice energy simulations
Camilla Haavik, Svein Stølen, Michael Hanfland, C. Richard A. Catlow
DOI: 10.1039/B006026G
Nature of the lowest triplet states of 4′-substituted N-phenylphenothiazine derivatives
Paweł Borowicz, Jerzy Herbich, Andrzej Kapturkiewicz, Romana Anulewicz-Ostrowska, Jacek Nowacki, Günter Grampp
DOI: 10.1039/B005058J
您可能还喜欢
6-氯-2H-1,4-苯并噁嗪-3(4H)-酮(CAS号:7652-29-1)应用于哪些行业?
6-氯-2H-1,4-苯并噁嗪-3(4H)-酮主要应用于医药、农药和聚合物等领域。在医药领域,该化合物可用于合成抗菌药物;在农药领域,可用作杀虫剂的中间体;在聚...
活性氧化铝(CAS号:1302-74-5)应用于哪些行业?
活性氧化铝广泛应用于医药、聚合物、传感器、半导体和催化等领域。在医药行业,活性氧化铝用作吸附剂和干燥剂,有助于去除杂质和水分。在聚合物行业,它用作增白剂和抗结块...
什么是硅胶(CAS号:112926-00-8)?
硅胶(Silica gel, pptd.,cryst.-free)是一种无定形、多孔的硅酸盐材料,主要成分为二氧化硅(SiO₂)。其结构由硅氧四面体构成,通过酸...
二乙基甲基一氢硅烷(CAS号:760-32-7)的主要用途是什么?
二乙基甲基一氢硅烷主要用于有机合成、表面处理以及作为溶剂。它还被用作合成其他硅烷化合物的原料,以及在涂料、粘合剂和密封剂中的应用。
在合成中是否有N-花生四烯酰基甘氨酸(CAS号:179113-91-8)的替代品?
在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如N-亚油酰基甘氨酸或N-花生二烯酰基甘氨酸。这些替代品在结构上有类似的双键位置,但可能具有不同的物理化...
在合成中是否有1-(4-甲氧基苯基)丙烷-1,2-二酮(CAS号:10557-27-4)的替代品?
在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如1-(3-甲氧基苯基)丙烷-1,2-二酮或1-(4-羟基苯基)丙烷-1,2-二酮。这些替代品具有相似的...
N-(4-氨基-1-苄基-3-羟基-5-苯基戊基)-3-甲基-2-(2-氧代四氢嘧啶-1-基)-丁酰胺 5-氧代吡咯烷-2-甲酸(CAS号:192726-06-0)通常如何合成?
该化合物通常通过一系列复杂的有机合成步骤获得。首先,通过芳香族化合物的羟基化反应获得羟基化产物,然后通过酰化反应形成酰胺中间体,最后通过环化反应得到目标产物。常...
(S)-2-氨基-3-喹啉-2-丙酸(CAS号:161513-46-8)的市场或研究趋势如何?
该化合物作为生物活性化合物,尤其是在药物化学领域表现出色。近年来,随着对新型抗炎、抗病毒和抗癌药物的研究增加,其市场和研究趋势持续增长。此外,其在神经科学领域的...
核黄素磷酸钠(CAS号:130-40-5)安全吗?
核黄素磷酸钠在常规使用条件下安全,但高剂量可能引起刺激性反应。操作时需佩戴防护手套和护目镜,避免吸入粉尘。若接触皮肤或眼睛,应立即用大量清水冲洗。急救时需根据接...
盐酸丙胺卡因杂质A(EP) 标准品(CAS号:19281-31-3)通常如何合成?
盐酸丙胺卡因杂质A(EP) 标准品可通过重氮化反应和随后的酰胺化反应合成。首先,利用氯化反应将苯环上的氢原子转化为氯原子,然后通过芳香族重氮化反应引入氨基,最后...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.




