Liquid flow-induced electricity in carbon nanomaterials
文献信息
Junxian Pei, Jun Huang, Zhi Huang, Kang Liu
Simple-structured and efficient electricity generation technology offers potential for power supply of distributed electronics, sensors, and self-powered systems. Liquid flow-induced electricity generation in carbon nanomaterials has thus attracted great interest in the past few decades, and different flowing architectures have been reported including liquid flow outside carbon nanotubes, liquid flow over graphene, liquid flow inside carbon nanotubes, droplet flow over carbon nanomaterials and evaporation-driven flow in carbon nanomaterials. In this review, we summarized the current status of and recent progress in this novel electricity generation technology, including the basic phenomenon, underlying mechanisms and applied materials. We emphasized the discussion about differences and interconnections of different flowing architectures. Prospects for further mechanism revelation and performance enhancement are also proposed.
相关文献
A liquid CO2-compatible hydrocarbon surfactant: experiment and modelling
Soumi Banerjee, J. Mieke Kleijn, Martien A. Cohen Stuart, Frans A. M. Leermakers
DOI: 10.1039/C3CP52571F
Selective deprotonation of oxazole and photoelectron imaging of the oxazolide anion
Lori M. Culberson, Christopher C. Blackstone, Ronald Wysocki, Andrei Sanov
DOI: 10.1039/C3CP53176G
Sulfur-doped graphene as a potential alternative metal-free electrocatalyst and Pt-catalyst supporting material for oxygen reduction reaction
Ji-eun Park, Yu Jin Jang, Yeo Jin Kim, Mi-sun Song, Seokhyun Yoon, Dong Ha Kim, Sung-Jin Kim
DOI: 10.1039/C3CP54311K
A roaming wavepacket in the dynamics of electronically excited 2-hydroxypyridine
Lionel Poisson, Benoît Soep, Majdi Hochlaf, Martial Boggio-Pasqua, Jean-Michel Mestdagh
DOI: 10.1039/C3CP52923A
Photoresponse of the protonated Schiff-base retinal chromophore in the gas phase
Y. Toker, D. B. Rahbek, H. V. Kiefer, J. Rajput, R. Antoine, P. Dugourd, S. Brøndsted Nielsen, L. H. Andersen
DOI: 10.1039/C3CP51759D
Growth and oxidation of graphene on Rh(111)
Karin Gotterbarm, Wei Zhao, Oliver Höfert, Christoph Gleichweit, Christian Papp, Hans-Peter Steinrück
DOI: 10.1039/C3CP53802H
Selective photoredox using graphene-based composite photocatalysts
DOI: 10.1039/C3CP53325E
Enhanced potassium selectivity in a bioinspired solid nanopore
Fabien Picaud, Sebastian Kraszewski, Christophe Ramseyer, Philippe Déjardin, Jean Marc Janot, François Henn
DOI: 10.1039/C3CP52123K
Hydrodeoxygenation by deuterium gas – a powerful way to provide insight into the reaction mechanisms
Glen A. Ferguson, Yunqiao Pu, Fang Huang, Mark Jarvis, Mary Biddy
DOI: 10.1039/C3CP53409J
Structural phase transition and photoluminescence properties of YF3 and YF3:Eu3+ under high pressure
Chen Gong, Quanjun Li, Ran Liu, Yuan Hou, Jinxian Wang, Xiangting Dong, Bo Liu, Xue Yang, Zhen Yao, Xiao Tan, Dongmei Li, Jing Liu, Zhiqiang Chen, Bo Zou, Tian Cui, Bingbing Liu
DOI: 10.1039/C3CP53230E
您可能还喜欢
什么是2-氨基戊烷(CAS号:63493-28-7)?
2-氨基戊烷,又名pentan-2-amine,是一种有机化合物,分子式为C5H11NH2。它是一种无色透明液体,有氨味。该化合物在工业和研究中有一定的应用。
反式-4-[4-[[[5-[(3,4-二氟苯基)氨基]-1,3,4-恶二唑-2-基]羰基]氨基]苯基]环己烷乙酸(CAS号:892489-52-0)的物理化学性质是什么?
该化合物为白色固体,分子量为552.31 g/mol。它在水中溶解度较低,在有机溶剂如乙腈、乙酸乙酯中有较好的溶解性。该化合物具有较高的化学稳定性,对酸和碱具有...
如何处理含有Pyrotinib dimaleate(CAS号:1397922-61-0)的废料?
处理含有Pyrotinib dimaleate 的废料时,应遵循当地的法规要求。首先,收集废料并进行分类,确保没有与其他化学品混合。然后,采取适当的物理和化学处...
在合成中是否有4-(5-5-乙基-1,2,4-噁二唑-3-基)苯甲酸乙酯(CAS号:1166756-79-1)的替代品?
在合成过程中,可以考虑使用其他结构类似的化合物作为替代品,例如苯甲酸酯类化合物,如2-乙基-5-甲基噁二唑基苯甲酸乙酯等。这些替代品可能具有相似的化学性质,但在...
如何处理含有1-((叔丁氧基羰基)氨基)环丁烷甲酸甲酯(CAS号:880166-10-9)的废料?
处理含有该化合物的废液时,应先确保其完全反应并转化为无害物质。对于未反应的化合物,建议采用中和处理后进行蒸馏回收,剩余物可使用化学氧化法或焚烧法进行无害化处理。...
2-({[3,5-二(三氟甲基)苯基]磺酰基}氨基)-4-(甲基硫代)丁酸甲酯(CAS号:175202-21-8)的市场或研究趋势如何?
目前该化合物主要应用于药物合成领域,尤其在开发新型抗癌药物方面具有潜在应用。随着制药行业的持续发展,对于高效、低毒的合成中间体需求增加,预计该化合物的研究和应用...
N,N-乙烯双(碘乙酰胺)(CAS号:7250-43-3)的物理化学性质是什么?
N,N-乙烯双(碘乙酰胺)是一种白色或类白色固体,易溶于乙醇、丙酮等有机溶剂,但在水中溶解度较低。该化合物具有较高的反应活性,可以与其他含有活性氢的化合物发生酰...
7-Fluoro-1H-spiro[furo[3,4-c]pyridine-3,4'-piperidine](CAS号:1283090-73-2)通常如何合成?
该化合物可以通过环合反应合成,首先合成吡啶和哌啶的衍生物,然后在合适的条件下进行环合反应得到目标化合物。常用的催化剂包括某些金属盐类,产率一般在70%-90%之...
处理3-乙酰滇乌碱(CAS号:80787-51-5)时应注意哪些实验室安全事项?
在处理3-乙酰滇乌碱时,应穿戴适当的个人防护装备(PPE),如实验服、手套(丁腈手套或PVC手套)、护目镜和口罩。实验应在通风橱中进行,以减少吸入或皮肤接触的风...
如何储存2-溴-5-硝基-4-羧酸(CAS号:1053655-82-5)?
2-溴-5-硝基-4-羧酸应存放在阴凉、干燥、通风良好的地方,远离火源和热源。避免与还原剂、碱性物质接触。储存容器应密封,防止吸湿。















