Autonomous self-healing polyisoprene elastomers with high modulus and good toughness based on the synergy of dynamic ionic crosslinks and highly disordered crystals

文献信息

发布日期 2020-09-07
DOI 10.1039/D0PY01034K
影响因子 5.582
作者

Mayu Yamada, Yu Shinke, Shoichi Kutsumizu


查看原文

摘要

Herein, we designed a novel polyisoprene (PI) elastomer with high mechanical properties and autonomous self-healing capability at room temperature facilitated by the coexistence of dynamic ionic crosslinks and crystalline components that slowly reassembled. We prepared amorphous cis-PI and semicrystalline trans-PI that were ionically modified with partially sodium-neutralized carboxy groups; a small amount (less than 30 wt%) of ionic trans-PI was blended with the ionic cis-PI. Nanosized ionic aggregates in the elastomers were formed by the ionic groups and they acted as physical crosslinks; the ionic network continuously rearranged at room temperature. We found that the crystalline components formed in the blended elastomers exhibited a higher degree of internal disorder owing to the miscibility of cis- and trans-PIs despite having different stereoregularities. The highly disordered crystalline components served as extra physical crosslinks that reinforced the material's mechanical strength: the modulus of the blended elastomer containing the ionic trans-PI (30 wt%) was 28 MPa at room temperature, whereas the neat ionic cis-PI was 1.2 MPa. Cut pieces of the blended elastomers reconnected at room temperature, and their self-healing efficiency was comparable to that of the neat ionic cis-PI at a trans-PI concentration below 20 wt% despite their improved moduli. Fourier transform infrared analysis revealed that the highly disordered crystalline regions in the blended samples were destroyed at the damaged faces. When the composition of the ionic trans-PI was lower than 20 wt%, the reassembly of the highly disordered crystalline regions at room temperature was slow compared with the interdiffusion process of the polymer chains between the damaged faces, and thereby self-healing was not disturbed.

相关文献

Applicability of some mass spectrometric criteria for the confirmation of pesticide residues

Eugenia Soboleva, Karam Ahad, Árpád Ambrus

2004-08-13 Paper

DOI: 10.1039/B405024J

The impact of intramolecular polydispersity on the self-assembly of ABn miktoarm star copolymers

Jiahao Shi, Xianbo Huang, Weihua Li

2023-07-06 Paper

DOI: 10.1039/D3CP00994G

In-depth study of binary ethanol–triacetin mixtures in relation to their excellent solubilization power

Evamaria Hofmann, Anna Saridis, Didier Touraud, Richard Buchner, Werner Kunz

2023-07-25 Paper

DOI: 10.1039/D3CP02716C

Enhancing proton mobility and thermal stability in phosphate glasses with WO3: the mixed glass former effect in proton conducting glasses

Aman Sharma, Issei Suzuki, Tomohiro Ishiyama, Takahisa Omata

2023-07-03 Paper

DOI: 10.1039/D3CP01453C

Direct measurement of lipid-soluble arsenic species in biological samples with HPLC-ICPMS

Ernst Schmeisser, Walter Goessler, Norbert Kienzl, Kevin A. Francesconi

2005-04-18 Paper

DOI: 10.1039/B502445E

Recent advances in the anti-counterfeiting applications of long persistent phosphors

Qingqing Kuang, Xiaochun Hou, Chengxue Du, Xiaojun Wang, Dangli Gao

2023-06-12 Perspective

DOI: 10.1039/D3CP01818K

Application of the lag-after-pulsed-separation (LAPS) flow meter to different protein solutions

Shramik Sengupta, Goher Mahmud, Daniel J. Chiou, Babak Ziaie

2004-12-16 Paper

DOI: 10.1039/B413808M

The application of LC-NMR and LC-SPE-NMR to compositional studies of natural organic matter

Andre J. Simpson, Li-Hong Tseng, Myrna J. Simpson, Manfred Spraul, Ulrich Braumann, William L. Kingery, Brian P. Kelleher, Michael H. B. Hayes

2004-10-15 Paper

DOI: 10.1039/B408064E

您可能还喜欢

化合物问答

硅烷偶联剂ZQ-172(CAS号:1067-53-4)的主要用途是什么?

硅烷偶联剂ZQ-172主要用于增强无机填料与有机高分子材料之间的相容性,常见于橡胶、塑料、涂料和胶黏剂等复合体系中。其硅氧烷基团可与玻璃纤维、二氧化硅等无机物表...

1067-53-46-(2-Methoxyethoxy)-...
化合物问答

如何处理含有6-(2,4-二甲氧基苯基)-2-吡啶甲醇(CAS号:887981-31-9)的废料?

对于含有该化合物的废料,首先应收集并分类存放,避免与其它化学品混合。在处理前,需进行必要的检测,确定其含量和性质。随后,可以采用化学氧化、生物降解或物理吸附等方...

887981-31-9[6-(2,4-Dimethoxyphe...
化合物问答

甲砜霉素甘氨酸酯盐酸盐(CAS号:2611-61-2)的物理化学性质是什么?

该化合物为白色或类白色结晶性粉末,不溶于水,溶于乙醇和氯仿。分子量为403.03 g/mol。它具有手性,含有三个手性中心,分别为2S,3R构型。该化合物在酸性...

2611-61-2(2S,3R)-2-[(Dichloro...
化合物问答

如何储存反式-环丙烷-1,2-二胺双盐酸盐(CAS号:3187-76-6)?

反式-环丙烷-1,2-二胺双盐酸盐应存放在阴凉、干燥且通风良好的地方,避免阳光直射。储存容器应密封,以防挥发和受潮。同时,应远离火源和热源,确保储存环境温度不超...

3187-76-6trans-1,2-Diaminocyc...
化合物问答

什么是吩嗪硫酸甲酯(CAS号:299-11-6)?

吩嗪硫酸甲酯是一种有机化合物,化学结构由吩嗪环与甲酯基团构成,分子式为C10H9N2SO4。其为吩嗪类衍生物,具有典型的芳香环结构和酯基官能团,常作为氧化剂或染...

299-11-65-Methylphenazin-5-i...
化合物问答

N1-异丙基二乙烯三胺(CAS号:207399-20-0)的市场或研究趋势如何?

随着绿色化学和环保意识的提高,N1-异丙基二乙烯三胺的研究趋势正向低毒、环保的方向发展。市场趋势方面,由于其在功能性材料、药物合成等领域的需求,预计其市场需求将...

207399-20-0N-(2-Aminoethyl)-N'-...
化合物问答

4,4-Dimethyl-5,6-dihydro-4H-cyclopenta[d][1,3]thiazol-2-amine(CAS号:1182284-47-4)应用于哪些行业?

该化合物在医药、聚合物、传感器和半导体领域有潜在的应用。在医药领域,作为一种新型的噻唑类化合物,它可能具有抗炎、抗病毒等生物活性。在聚合物领域,该化合物可用作增...

1182284-47-44,4-Dimethyl-5,6-dih...
化合物问答

处理5-(PYRIDIN-4-YL)-OXAZOL-2-YLAMINE(CAS号:1014629-83-4)时应注意哪些实验室安全事项?

在处理5-(吡啶-4-基)-2-氧代-1-氧杂环己烷-3-胺时,应佩戴防护眼镜、手套和防护服。实验应在通风橱中进行,以避免吸入有害气体。如果发生泄露,应立即用大...

1014629-83-45-(4-Pyridinyl)-1,3-...
化合物问答

什么是伊托必利N-氧化物(CAS号:141996-98-7)?

伊托必利N-氧化物是一种化学化合物,其分子结构是伊托必利的N位进行氧化处理后的产物。它具有一定的生物活性,主要用于药物研究和开发。

141996-98-7Itopride N-Oxide
化合物问答

氟氯烟酸(CAS号:82671-06-5)安全吗?

氟氯烟酸属于有机氯化物,具有一定的毒性,需谨慎处理。在操作过程中,应佩戴防护手套、护目镜和实验服,避免吸入其粉尘或蒸汽。接触皮肤或眼睛可能导致刺激,应采取适当的...

82671-06-52,6-Dichloro-5-fluor...

来源期刊

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自引率: 7.3%
年发文量: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。