Dynamic covalent exchange in poly(thioether anhydrides)
文献信息
Kelly R. Tillman, Rebecca Meacham, Anne N. Rolsma, Mikenzie Barankovich, Ana M. Witkowski, Patrick T. Mather, Tyler Graf, Devon A. Shipp
Dynamic covalent exchange (DCE) of anhydride moieties is examined in both model compounds and network polymers. In addition, the polyanhydrides are shown to be capable of self-healing and recycling. Specifically, thermodynamic and kinetic analysis of the exchange process in symmetric model compounds methacrylic anhydride and 4-pentenoic anhydride, which produce an asymmetric anhydride upon exchange, was undertaken using 13C NMR spectroscopy. The equilibrium constant (Keq) was determined to be approximately 2–3, and the activation energy (Ea) for the production of the asymmetric anhydride was 178 kJ mol−1. The rate of exchange was shown to be increased catalytically in the presence of carboxylic acid. Poly(thioether anhydrides) were made using 4-pentenoic anhydride and mixtures of dithiol (1,6-hexanedithiol) and tetrathiol (pentaerythritol tetrakis(3-mercaptopropionate)) via radical-mediated thiol–ene polymerizations, and network relaxation rates studied using dynamic mechanical analysis. The activation energy and stress relaxation times for various polymer compositions were correlated to crosslink density and polymer composition. It was determined that cross-link density of the polymer system does not significantly impact Ea; however, relaxation time (τ) nearly quadrupled from the least cross-linked system to the most cross-linked system. The network polymers exhibited self-healing and facile recycling behavior, which we attributed to the anhydride DCE process that occurs readily in these materials at elevated temperatures. Using the composition with the fastest relaxation, we observed complete visible recovery of damage (notch) within a 4 hours duration at 90 °C. Recycling under compression molding for 15 minutes using 76 MPa hydrostatic pressure at 90 °C was successful. Both healed and recycled samples were successful in recovering or surpassing their original mechanical properties.
相关文献
Single-nanoparticle spectroelectrochemistry studies enabled by localized surface plasmon resonance
Shanlin Pan, Xiao Li, Jeetika Yadav
DOI: 10.1039/D1CP02801D
Aromaticity-promoted CS2 activation by heterocycle-bridged P/N-FLPs: a comparative DFT study with CO2 capture
Yuanyuan Li, Danling Zhuang, Rulin Qiu, Jun Zhu
DOI: 10.1039/D1CP05319A
Assessment of DFT approaches in noble gas clathrate-like clusters: stability and thermodynamics
Rita Prosmiti
DOI: 10.1039/D1CP04935F
Activation of CO2 and CH4 on MgO surfaces: mechanistic insights from first-principles theory
Meghna A. Manae, Lakshay Dheer, Sandhya Rai, Sharan Shetty, Umesh V. Waghmare
DOI: 10.1039/D1CP04152E
Fabrication and application of composite adsorbents made by one-pot electrochemical exfoliation of graphite in surfactant ionic liquid/nanocellulose mixtures
Nur Amirah Jamaluddin, Suriani Abu Bakar, Tretya Ardyani, Masanobu Sagisaka, Haruka Saito, Mohamad Hafiz Mamat, Mohd Khairul Ahmad, H. P. S. Abdul Khalil, Stephen M. King, Sarah E. Rogers, Julian Eastoe
DOI: 10.1039/D1CP02206G
Air separation via two-step solar thermochemical cycles based on SrFeO3−δ and (Ba,La)0.15Sr0.85FeO3−δ perovskite reduction/oxidation reactions to produce N2: rate limiting mechanism(s) determination
Nhu Pailes Nguyen, Tyler P. Farr, H. Evan Bush, Andrea Ambrosini, Peter G. Loutzenhiser
DOI: 10.1039/D1CP03303D
Magnetically induced ring currents in metallocenothiaporphyrins
Theo Kurten, Lenara I. Valiulina, Sergey Yu. Ketkov, Viktor N. Cherepanov, Maria Dimitrova, Dage Sundholm
DOI: 10.1039/D1CP04779E
Ultra-low thermal conductivity and high thermoelectric performance of monolayer BiP3: a first principles study
Hengyu Yang
DOI: 10.1039/D1CP01383A
RPnet: a reverse-projection-based neural network for coarse-graining metastable conformational states for protein dynamics
Hanlin Gu, Wei Wang, Siqin Cao, Ilona Christy Unarta, Yuan Yao
DOI: 10.1039/D1CP03622J
您可能还喜欢
2-(甲基磺酰基)嘧啶-5-胺(CAS号:56621-92-2)适用哪些法规指南?
该化合物适用的法规指南包括GHS(全球化学品统一分类和标签制度)分类为特定目标器官毒性-单次接触类别3;根据欧盟REACH法规,该化合物需要进行注册和评估;在美...
在合成中是否有4-(4-氯苯基)-1H-咪唑(CAS号:35512-29-9)的替代品?
在合成中,可以考虑使用一些类似的化合物作为4-(4-氯苯基)-1H-咪唑的替代品,如4-(4-溴苯基)-1H-咪唑或4-(4-甲氧基苯基)-1H-咪唑。这些化合...
什么是N~2~-甲基丙氨酸酰胺(CAS号:32012-16-1)?
N~2~-甲基丙氨酸酰胺是一种有机化合物,其化学名为2-(Methylamino)propanamide。它是一种酰胺类化合物,分子式为C4H10N2O,相对分...
如何处理含有N-苄基-3-氨基氧杂环丁烷草酸盐(CAS号:1956341-96-0)的废料?
处理含有N-苄基-3-氨基氧杂环丁烷草酸盐(CAS号:1956341-96-0)的废料时,应首先确保遵循相关法规要求,如GHS和REACH等。通常,废液应先进行...
4-bromo-2-chloro-6-methylbenzoic acid(CAS号:877149-07-0)的物理化学性质是什么?
4-溴-2-氯-6-甲基苯甲酸是一种固体化合物,具有较高的熔点和较低的沸点。它的分子量为261.03 g/mol。该化合物在水中几乎不溶,在有机溶剂中溶解度适中...
2-[(2,5-二氯-4-嘧啶)氨基]-N-甲基苯甲酰胺(CAS号:761440-08-8)通常如何合成?
该化合物通常通过缩合反应合成,典型的方法是将2,5-二氯嘧啶与N-甲基苯甲酰胺在碱性条件下进行偶联反应。常用的碱包括NaH、LDA等强碱。该合成路线具有较高的选...
在合成中是否有3,5-二溴-4-甲基苯胺(CAS号:13194-73-5)的替代品?
3,5-二溴-4-甲基苯胺在某些合成路线中可能没有直接替代品。然而,在某些应用场景下,可以考虑使用其他类似结构的化合物如3,5-二溴-4-硝基苯胺或3,5-二碘...
2-氯喹啉-4-羧酸甲酯(CAS号:62482-26-2)的主要用途是什么?
2-氯喹啉-4-羧酸甲酯主要用于有机合成和药物合成领域,作为中间体或原料。它在合成某些药物和染料时具有重要作用。此外,该化合物还可能用于某些特定的化学研究中。
i>]吡啶(CAS号:474708-88-8)安全吗?
6-溴-8-氯咪唑[1,2-a]吡啶在操作过程中需要谨慎以确保安全。该化合物具有一定的毒性,吸入其蒸气或粉尘可能导致呼吸道刺激。处理时应佩戴适当的防护装备,如手...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.











![(1S,4aR,5R,7S,7aS)-1-(beta-D-Glucopyranosyloxy)-5-hydroxy-7-methyl-1,4a,5,6,7,7a-hexahydrocyclopenta[c]pyran-7-yl alpha-D-galactopyranoside structure (1S,4aR,5R,7S,7aS)-1-(beta-D-Glucopyranosyloxy)-5-hydroxy-7-methyl-1,4a,5,6,7,7a-hexahydrocyclopenta[c]pyran-7-yl alpha-D-galactopyranoside structure](https://cnstatic.chemtradehub.com/structs/817/81720-07-2-4ffd.webp)


