Telechelic polyethylene, poly(ethylene-co-vinyl acetate) and triblock copolymers based on ethylene and vinyl acetate by iodine transfer polymerization
文献信息
Florian Baffie, Muriel Lansalot, Vincent Monteil, Franck D'Agosto
Various iodo functionalized chain transfer agents (CTAs) were successfully employed in the iodine transfer polymerization (ITP) of ethylene conducted at 80 bars at 70 °C in dimethylcarbonate. Comparative studies performed on I–C6F12–I, C6F13–I, C6F12(CH2)2–I and C5H10–I mediated ITPs revealed that when I–C6F12–I was used as CTA the very first ethylene additions resulted in the formation of diiodo oligomeric compounds with various chain transfer activities. This however did not impede a good control of the polymerization that was rapidly installed. This allows the formation of well-defined telechelic polyethylene (I–PE–I) and poly(ethylene-co-vinyl acetate) (I–EVA–I) by ITP. I–EVA–I telechelic copolymers were further used as macromolecular CTAs in chain extension experiments in the presence of ethylene to lead to PE-b-EVA-b-PE triblock copolymers with different content of VAc (27 and 64 mol%) in the central EVA block.
相关文献
Dihydrogen vs. hydrogen bonding in the solvation of ammonia borane by tetrahydrofuran and liquid ammonia
Thomas F. Headen, Samantha K. Callear, Matthew Billing, Andrea Sella
DOI: 10.1039/C7CP08220G
Non-linear and non-local behaviour in spontaneously electrical solids
M. Roman, S. Taj, M. Gutowski, M. R. S. McCoustra, A. C. Dunn, Z. G. Keolopile, A. Rosu-Finsen, A. M. Cassidy, D. Field
DOI: 10.1039/C7CP08489G
Molecular dynamics simulation of a nanofluidic energy absorption system: effects of the chiral vector of carbon nanotubes
Sayed Hossein Ganjiani, Alireza Hossein Nezhad
DOI: 10.1039/C7CP07395J
First-principles prediction of two-dimensional metal bis(dithiolene) complexes as promising gas sensors
Hongmei Liu, Xiaolong Li, Changmin Shi, Dongchao Wang, Li Chen, Yuanyuan He, Jianwei Zhao
DOI: 10.1039/C8CP00900G
Liquid crystals of hard rectangles on flat and cylindrical manifolds
DOI: 10.1039/C7CP07026H
Synergism of fictitious forces on nickel cobaltite nanofibers: electrospinning forces revisited
B. Sachin Kumar, Sreeram K. Kalpathy, S. Anandhan
DOI: 10.1039/C7CP07435B
Competitor analysis of functional group H-bond donor and acceptor properties using the Cambridge Structural Database
James McKenzie, Christopher A. Hunter
DOI: 10.1039/C8CP05470C
Detecting reactive islands using Lagrangian descriptors and the relevance to transition path sampling
Sarbani Patra, Srihari Keshavamurthy
DOI: 10.1039/C7CP05912D
Effect of chemical structure on the subglass relaxation dynamics of biobased polyesters as revealed by dielectric spectroscopy: 2,5-furandicarboxylic acid vs. trans-1,4-cyclohexanedicarboxylic acid
L. Genovese, M. Soccio, N. Lotti, A. Munari, A. Szymczyk, S. Paszkiewicz, A. Linares, A. Nogales, T. A. Ezquerra
DOI: 10.1039/C8CP01810C
Revisiting absorption and electronic circular dichroism spectra of cholesterol in solution: a joint experimental and theoretical study
Andrea Bonvicini, Laure Guilhaudis, Vincent Tognetti, Didier Desmaële, Nathalie Sauvonnet, Hassan Oulyadi, Laurent Joubert
DOI: 10.1039/C7CP07713K
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














