Back cover
文献信息
A graphical abstract is available for this content
期刊推荐

Russian Chemical Bulletin

Drug Discovery Today

Current Opinion in Solid State & Materials Science

Crystallography Reports

New Journal of Chemistry

Organic Process Research & Development

Russian Journal of Bioorganic Chemistry

Journal of Natural Medicines

Chemical Communications

Current Opinion in Colloid & Interface Science
相关文献
Water desalination using graphene nanopores: influence of the water models used in simulations
Vishnu Prasad K., Remco Hartkamp, Sarith P. Sathian
DOI: 10.1039/C8CP00919H
X-ray-induced sample damage at the Mn L-edge: a case study for soft X-ray spectroscopy of transition metal complexes in solution
Markus Kubin, Jan Kern, Meiyuan Guo, Erik Källman, Rolf Mitzner, Vittal K. Yachandra, Marcus Lundberg, Junko Yano, Philippe Wernet
DOI: 10.1039/C8CP03094D
Understanding water interactions with organic surfaces: environmental molecular beam and molecular dynamics studies of the water–butanol system
Sofia M. Johansson, Xiangrui Kong, Erik S. Thomson, Stéphane Briquez, Céline Toubin, Jan B. C. Pettersson
DOI: 10.1039/C8CP04151B
Super-resolution optical microscopy resolves network morphology of smart colloidal microgels
Stephan Bergmann, Oliver Wrede, Thomas Huser, Thomas Hellweg
DOI: 10.1039/C7CP07648G
Characterization of the binding interactions between EvaGreen dye and dsDNA
L. C. T. Shoute, G. R. Loppnow
DOI: 10.1039/C7CP06058K
A systematic study of various 2D materials in the light of defect formation and oxidation
A. K. A. Lu, D. Chiappe
DOI: 10.1039/C8CP05665J
New insights into the plasmonic enhancement for photocatalytic H2 production by Cu–TiO2 upon visible light illumination
S. Hamid, F. Sieland, J. Sann, S. Xia, J. Schneider
DOI: 10.1039/C7CP07762A
Zn-Porphyrin propped with hydantoin anchor: synthesis, photophysics and electron injection/recombination dynamics
Poomani Ram Kumar, Ebrahim M. Mothi, Mohan Ramesh, Arunkumar Kathiravan
DOI: 10.1039/C7CP07326G
Investigations on the charge transfer mechanism at donor/acceptor interfaces in the quest for descriptors of organic solar cell performance
Kenji Mishima, Hiroki Matsunaga
DOI: 10.1039/C8CP01253A
您可能还喜欢
3 - (二氟甲基)-1 -氟苯(CAS号:26029-52-7)适用哪些法规指南?
3 - (二氟甲基)-1 -氟苯需遵循联合国全球化学品统一分类和标签制度(GHS),包括急性毒性、皮肤腐蚀/刺激、严重眼损伤/眼刺激等分类。同时,该化合物还需符...
3,5-二甲基苯胺(CAS号:108-69-0)通常如何合成?
3,5-二甲基苯胺通常通过乙苯的氨解反应合成。反应中使用硫酸作为催化剂,反应温度为120-130°C。乙苯在硫酸存在下与氨反应,生成3,5-二甲基苯胺和苯胺副产...
3-甲基异噻唑-5-胺(CAS号:24340-76-9)安全吗?
3-甲基异噻唑-5-胺在适当使用和储存条件下是相对安全的,但在操作时应注意防护措施。应避免吸入粉尘,避免与皮肤和眼睛直接接触。在操作过程中,应穿戴适当的防护装备...
3-(1,3-Thiazol-2-yl)-1H-indole(CAS号:135531-86-1)通常如何合成?
3-(1,3-噻唑-2-基)-1H-吲哚通常通过多步合成方法制备。首先,由噻唑-2-基溴化物和吲哚进行偶联反应,得到中间体。然后,通过还原反应将中间体转化为所需...
4-溴-2-氟苯甲基氯(CAS号:85510-82-3)的主要用途是什么?
4-溴-2-氟苯甲基氯主要用于有机合成中间体,特别是在医药、农药和染料等领域。作为一种具有特定结构的化合物,它在合成复杂有机分子时扮演重要角色。
处理Fmoc-β-(3-噻吩基)-D-Ala-OH(CAS号:220497-90-5)时应注意哪些实验室安全事项?
处理Fmoc-β-(3-噻吩基)-D-Ala-OH时,应佩戴防护手套、护目镜和实验服。操作应在通风橱内进行。如发生泄露,应立即用大量水冲洗,并通知实验室管理人员...
氮化硅(CAS号:12033-89-5)通常如何合成?
氮化硅通常通过氮化硅的直接反应合成,即在高温下将四氯化硅与氨气反应。具体步骤是将四氯化硅和氨气混合并加热至1300-1700℃,在该条件下,四氯化硅与氨气反应生...
Cetirizine EP Impurity B DiHCl(CAS号:1000690-91-4)通常如何合成?
Cetirizine EP Impurity B DiHCl通常通过一锅法合成,首先将4-氯苯基-苯甲基氯甲酸酯与1-哌嗪乙酸反应,生成相应的酸,然后与盐酸反应...
如何储存1-哌啶-4-基丁-1-酮(CAS号:3509-15-7)?
1-哌啶-4-基丁-1-酮应储存在阴凉、干燥的地方,避免阳光直射。存储容器应密封,并确保通风良好。建议储存温度不超过25℃,湿度保持在相对较低的水平。
如何处理含有VORUCICLIB(CAS号:1000023-04-0)的废料?
含有VORUCICLIB的废料应进行专业的收集和处理,包括使用适当的容器进行隔离,避免与其他化学品接触。处理方法通常包括化学中和、沉淀反应或吸附过程,随后进行焚...
来源期刊
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.
![Pyrazolo[1,5-a]pyridine-3-carbothioamide structure Pyrazolo[1,5-a]pyridine-3-carbothioamide structure](https://cnstatic.chemtradehub.com/structs/885/885275-44-5-aae0.webp)



