In situ forming, mechanically resilient hydrogels prepared from 4a-[PEG-b-PTMC-Ac] and thiolated chondroitin sulfate for nucleus pulposus cell delivery

文献信息

发布日期 2023-12-21
DOI 10.1039/D3TB02574H
影响因子 6.331
作者

Hossein Riahinezhad, Brian G. Amsden


查看原文

摘要

Intervertebral disk degeneration (IVDD) is a common condition that causes severe back pain and affects patients’ mobility and life quality considerably. IVDD originates within the central region of the disk called the nucleus pulposus (NP). Removing the damaged tissue and replacing it with NP cells (NPCs) delivered within an in situ forming hydrogel is a promising treatment approach. Herein we describe a hydrogel formulation based on 4-arm [poly(ethylene glycol)-b-poly(trimethylene carbonate)-acrylate] (4a[PEG-b-PTMC-Ac]) crosslinked with thiolated chondroitin sulfate via Michael-type reaction for this purpose. A library of hydrogels based on 15 kDa 4a-[PEG] with PTMC blocks of varying molecular weight were prepared and characterized. The instantaneous moduli of the hydrogels were adjustable from 24 to 150 kPa depending on the length of the PTMC block and the polymer volume fraction. The influence of each of these parameters was effectively explained using both scaling or mean field theories of polyelectrolyte hydrogels. The hydrogels were resistant to cyclic compressive loading and degraded gradually over 70 days in vitro. A hydrogel formulation with an instantaneous modulus at the high end of the range of values reported for human NP tissue was chosen to assess the ability of these hydrogels for delivering NPCs. The prepolymer solution was injectable and formed a hydrogel within 30 minutes at 37 °C. Bovine NPCs were encapsulated within this hydrogel with high viability and proliferated throughout a 28 day, hypoxic culture period. The encapsulated NPCs formed clusters and deposited collagen type II but no collagen type I within the hydrogels. Despite an initial gradual decrease, a steady-state modulus was reached at the end of the 28 day culture period that was within the range reported for healthy human NP tissue. This in situ forming hydrogel formulation is a promising approach and with further development could be a viable clinical treatment for IVDD.

相关文献

Aqueous RAFT/MADIX polymerisation of vinylphosphonic acid

Issam Blidi, Roland Geagea, Olivier Coutelier, Stéphane Mazières, Frédéric Violleau, Mathias Destarac

2012-01-11 Communication

DOI: 10.1039/C2PY00541G

Synthesis of poly(p-phenylene vinylene) materials via the precursor routes

Tanja Junkers, Joke Vandenbergh, Peter Adriaensens, Laurence Lutsen

2011-09-23 Review Article

DOI: 10.1039/C1PY00345C

A biocompatible, metal-free catalyst and its application in microwave-assisted synthesis of functional polyesters

Zhengwei You, Eric M. Jeffries, Yadong Wang

2011-11-29 Paper

DOI: 10.1039/C1PY00400J

A facile and fast method for the functionalization of polymersomes by photoinduced cycloaddition chemistry

Hans-Peter M. de Hoog, Bo Liedberg

2011-12-08 Communication

DOI: 10.1039/C1PY00413A

Constructing star polymersvia modular ligation strategies

Ozcan Altintas, Andrew P. Vogt, Christopher Barner-Kowollik, Umit Tunca

2011-08-10 Review Article

DOI: 10.1039/C1PY00249J

Random introduction of degradable linkages into functional vinyl polymers by radical ring-opening polymerization, tailored for soft tissue engineering

Jenny Undin, Teresa Illanes, Anna Finne-Wistrand, Ann-Christine Albertsson

2012-03-19 Paper

DOI: 10.1039/C2PY20034A

From miscible to partially miscible biodegradable double crystalline poly(ethylene succinate)-b-poly(butylene succinate) multiblock copolymers

Jian-Bing Zeng, Qun-Ying Zhu, Xi Lu, Yi-Song He, Yu-Zhong Wang

2011-12-01 Paper

DOI: 10.1039/C1PY00456E

Light-emitting poly(N-naphthyl-2,7-carbazole)

Takeshi Mori, Toshinobu Shinnai

2011-10-10 Paper

DOI: 10.1039/C1PY00286D

您可能还喜欢

化合物问答

4-((4-甲基哌嗪-1-基)甲基)苯硼酸(CAS号:763120-62-3)的市场或研究趋势如何?

随着有机硼化学的发展,该化合物在催化、药物合成、材料科学等领域展现出潜在的应用价值。近年来,其在药物前体合成中的应用越来越受到关注。市场趋势显示,随着科研投入的...

763120-62-3{4-[(4-Methyl-1-pipe...
化合物问答

如何储存2,4,5-三甲基-1-硝基苯(CAS号:610-91-3)?

2,4,5-三甲基-1-硝基苯应储存在阴凉、干燥且通风良好的地方,避免阳光直射。储存在密封的金属容器中,远离火源和热源。储存温度应控制在25°C以下,湿度不宜过...

610-91-31,2,4-Trimethyl-5-ni...
化合物问答

处理2,5-二碘噻吩(CAS号:625-88-7)时应注意哪些实验室安全事项?

在处理2,5-二碘噻吩时,应穿戴适当的个人防护装备(PPE),包括实验室外套、手套和防护眼镜。在通风橱中进行操作以避免吸入蒸气。如果发生泄漏,应立即疏散人员并使...

625-88-72,5-Diiodothiophene
化合物问答

在合成中是否有6-bromo-3-chloro-1H-indole(CAS号:57916-08-2)的替代品?

在合成6-溴-3-氯-1H-吲哚(CAS号:57916-08-2)时,可以考虑使用一些类似的化合物作为替代品,如6-氯-3-氯-1H-吲哚或3-氯-1H-吲哚,...

57916-08-26-bromo-3-chloro-1H-...
化合物问答

在合成中是否有(R)-(-)-1-(1-萘基)乙基异氰酸酯(CAS号:42340-98-7)的替代品?

可以考虑使用类似结构的化合物,如1-[(1R)-1-(2-氨基乙基)萘-1-基]乙基异氰酸酯作为替代品。此外,还可以寻找其他类型的异氰酸酯衍生物,如苯基异氰酸酯...

42340-98-71-[(1R)-1-Isocyanato...
化合物问答

3-氨基苯甲酰苯胺(CAS号:14315-16-3)适用哪些法规指南?

3-氨基苯甲酰苯胺适用于多项法规指南,包括但不限于GHS(全球化学品统一分类和标签制度)分类为皮肤腐蚀/刺激类别2,以及潜在的皮肤过敏性类别1。在欧盟地区,它受...

14315-16-33-Amino-N-phenylbenz...
化合物问答

β-环柠檬醛-D5(CAS号:26309-95-5)通常如何合成?

β-环柠檬醛-D5可通过不对称合成方法获得。常见的合成路线包括以环己酮为原料,经过选择性氧化、还原、保护基引入等步骤,最终得到目标化合物。该合成过程中通常使用多...

26309-95-5[(2,2-Dimethylpropan...
化合物问答

如何储存布尼洛尔(CAS号:34915-68-9)?

布尼洛尔应存放在阴凉干燥处,避免阳光直射和高温。建议储存温度在15-30摄氏度之间,远离儿童触及范围。

34915-68-9Bunitrolol
化合物问答

如何处理含有BIO-1211(CAS号:187735-94-0)的废料?

对于含有BIO-1211(CAS号:187735-94-0)的废料,首先应进行分类收集,确保符合环保要求。然后,可以考虑通过焚烧或其他专业处理方法进行处置。在处...

187735-94-0BIO-1211
化合物问答

如何处理含有4-氯-2-氟-3-甲基苯酚(CAS号:1351668-24-0)的废料?

含有该化合物的废液应收集至专用容器中,避免与其他化学品混合。可采用焚烧或送交专业废弃物处理公司处理。处理过程中需遵守当地环保法规,确保不产生二次污染。处理前应进...

1351668-24-04-Chloro-2-fluoro-3-...

来源期刊

Journal of Materials Chemistry B

Journal of Materials Chemistry B
CiteScore: 12
自引率: 4.9%
年发文量: 831

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry B are listed below. This list is neither exhaustive nor exclusive. Antifouling coatings Biocompatible materials Bioelectronics Bioimaging Biomimetics Biomineralisation Bionics Biosensors Diagnostics Drug delivery Gene delivery Immunobiology Nanomedicine Regenerative medicine & Tissue engineering Scaffolds Soft robotics Stem cells Therapeutic devices image block All articles published in Journal of Materials Chemistry B from 2019 onwards will be indexed in MEDLINE®. Articles that primarily focus on providing insight into the underlying science and performance of biomaterials within a biological environment are more suited to our companion journal, Biomaterials Science.

推荐供应商

免责声明
本页面提供的学术期刊信息仅供参考和研究使用。我们与任何期刊出版商均无关联,也不处理投稿事宜。如有投稿相关咨询,请直接联系相关期刊出版商。
如发现页面信息有误,请发送邮件至 support@chemtradehub.com 联系我们。我们将及时核实并处理您的问题。