High-performance formaldehyde gas-sensors based on three dimensional center-hollow ZnO
文献信息
Linqi Shi, Jiabao Cui, Fei Zhao, Dejun Wang, Tengfeng Xie, Yanhong Lin
Three dimensional (3D) center-hollow ZnO architectures assembled by nanoparticles have been successfully fabricated on a large scale via a template-free method using an oil bath. The samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller specific surface area, surface photocurrent and UV-Vis diffuse reflectance spectroscopy. The photoelectric gas-sensing results demonstrated that the 3D porous, center-hollow ZnO structures exhibited excellent sensitivity and good selectivity to formaldehyde under 365 nm light irradiation at room temperature. The gas response to 1 ppm formaldehyde can reach 70%, which is superior to the results reported in the literature, indicating that the 3D center-hollow ZnO architectures are ideal candidate materials for photoelectric gas sensors. The underlying mechanisms responsible for the high sensitivity and selectivity to formaldehyde are discussed, which provide a new pathway for designing novel VOC sensors. Moreover, the facile method presented in this paper has the advantage of low-cost and high-yield, which is suitable for the practical production processes.
相关文献
Charge transfer complexes between tetranitrofluorenone and polyaromatic compounds from gasoil: a combined DFT and experimental study
Alexandra Milenkovic, Marc Lemaire
DOI: 10.1039/B313706F
Structure of the FeFe-cofactor of the iron-only nitrogenase and possible mechanism for dinitrogen reduction
Berit Hinnemann, Jens K. Nørskov
DOI: 10.1039/B310850C
Tricriticality in the ternary system 3-methylpyridine/water/NaBr? The coexistence curves
Monika Wagner, Olimpiu Stanga, Wolffram Schröer
DOI: 10.1039/B212337A
The HOOH–HOO complex. A matrix isolation study
Anders Engdahl, Bengt Nelander
DOI: 10.1039/B309964D
Synthesis and characterization of novel organic–inorganic hybrid block copolymers
Patrick Theato, Kook J. Kim, Do Y. Yoon
DOI: 10.1039/B314601B
Emulsifying properties of neutral and ionic polymersurfactants based on dextran
E. Rotureau, M. Leonard, E. Dellacherie, A. Durand
DOI: 10.1039/B314454M
Molecular simulation of adsorption of alkanes in sodium MOR-type zeolites using a new force field
DOI: 10.1039/B517774J
Studies on apparent molar volumes and heat capacities of several pluronics (triblock copolymers) in aqueous solutions of sodium dodecyl sulfate at 298.15 and 318.15 K
Stéphanie Senkov, Alain H. Roux, Geneviève Roux-Desgranges
DOI: 10.1039/B313717A
Evolution of nickel speciation during preparation of Ni–SiO2catalysts: effect of the number of chelating ligands in [Ni(en)x(H2O)6−2x]2+ precursor complexes
Ke-Qiang Sun, Eric Marceau, Michel Che
DOI: 10.1039/B513319J
您可能还喜欢
(3-氨苯基)环丙基甲酮(CAS号:162174-75-6)的主要用途是什么?
(3-氨苯基)环丙基甲酮主要用于合成化学中间体,特别是在药物化学领域作为原料。它还可以用于有机合成反应中,作为催化剂或反应物。
如何储存亚胺菌(CAS号:136470-79-6)?
亚胺菌应储存在干燥、阴凉处,避免直接暴露于光线下。建议使用密封容器储存,防止吸潮和污染。具体的储存条件应参考产品的安全数据表(MSDS)或药品说明书。
2-氯-2,2-二氟乙酰胺(CAS号:354-28-9)应用于哪些行业?
2-氯-2,2-二氟乙酰胺在医药、聚合物、传感器、半导体等领域有广泛应用。在医药领域,它作为中间体用于合成其他药物;在聚合物领域,用作聚合引发剂或稳定剂;在传感...
处理4-甲基-3-硝基-1,1-联苯(CAS号:53812-68-3)时应注意哪些实验室安全事项?
在处理4-甲基-3-硝基-1,1-联苯时,应佩戴手套、护目镜和实验室外套等个人防护装备(PPE),确保在通风橱中操作以减少吸入风险。若发生泄露,应立即使用沙子或...
(2S)-羟基(苯基)乙酸 (2R)-N-苄基-1-(4-甲氧基苯基)丙-2-胺盐(CAS号:188690-84-8)应用于哪些行业?
该化合物广泛应用于医药、聚合物和半导体行业。在医药领域,它是某些药物中间体的重要组成部分;在聚合物领域,可用作增塑剂;在半导体行业,可用于制造光刻胶。
在合成中是否有芬苯哒唑砜-D3标准品(CAS号:1228182-49-7)的替代品?
芬苯哒唑砜-D3标准品的替代品可能包括类似的苯并咪唑类化合物,如芬苯哒唑本身或其非同位素标记版本。这些替代品在结构上与芬苯哒唑砜-D3相似,但在具体应用中需进行...
2-氟-4-硝基苯乙酸(CAS号:315228-19-4)通常如何合成?
2-氟-4-硝基苯乙酸可以通过一系列化学反应合成,通常是从4-氟苯胺开始,首先进行硝化反应生成4-氟-2-硝基苯胺,然后进行乙酰化反应得到目标产物。具体的合成步...
2-氟-4-甲氧基苯乙酸(CAS号:883531-28-0)通常如何合成?
2-氟-4-甲氧基苯乙酸通常通过将4-甲氧基苯乙酸与氟化试剂(如氟化氰)反应来合成。反应通常在无水条件下进行,使用催化剂如六氟磷酸锂或四氟硼酸锂以提高选择性和产...
什么是4SC 202;4SC202(CAS号:1186222-89-8)?
4SC 202;4SC202是一种化学化合物,其化学名称为(2E)-N-(2-氨基苯基)-3-(1-{[4-(1-甲基-1H-吡唑-4-基)苯基]磺酰基}-1H...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![2-[({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)methyl]isonicotinic acid structure 2-[({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)methyl]isonicotinic acid structure](https://cnstatic.chemtradehub.com/structs/473/473924-63-9-973b.webp)

