The correction fluorescence inner filter effect using a single excitation and dual-emission fiber optic probe
文献信息
A significant disadvantage of fluorometry is the inner filter effect when the fluorophore concentration is high. A new simple fiber-optic probe was made to measure the concentration of fluorescent solutions. The proposed probe consists of one excitation fiber and two emission fibers. One emission fiber is parallel to the excitation fiber, and the other has a tilted angle with the excitation fiber. A numerical model was used to optimize the tilted angle and distance of the three fibers. There was a linear relationship between the fluorophore concentration and the ratio of the fluorescence intensity of the two emission fibers. Using our homemade probe, we measured Eosin Y, fluorescein and quinine sulfate solutions. The linear range of Eosin Y solution was up to 500 μM, which was approximately 7 times the range measured with a single emission probe. The results of fluorescein and quinine sulfate solutions also showed that the fluorescence intensity ratio method could correct the inner filter effect. The experimental results also indicated that the probe is robust when the excitation light fluctuates.
相关文献
Monte Carlo simulations of a charged dendrimer with explicit counterions and salt ions
M. Majtyka
DOI: 10.1039/B616575C
Allylic hydrogen abstraction II. H-abstraction from 1,4 type polyalkenes as a model for free radical trapping by polyunsaturated fatty acids (PUFAs)‡
Milan Szori, Tamas Abou-Abdo, Christa Fittschen, Bela Viskolcz
DOI: 10.1039/B613048H
The interaction of n-nonyl-β-d-glucopyranoside and sodium dodecyl sulfate with DMPC and DMPG monolayers studied by infrared reflection absorption spectroscopy
Annette Meister, Andreas Kerth, Alfred Blume
DOI: 10.1039/B410761F
Orienting and aligning molecules for stereochemistry and photodynamics
Vincenzo Aquilanti, Massimiliano Bartolomei, Fernando Pirani, David Cappelletti, Franco Vecchiocattivi, Toshio Kasai
DOI: 10.1039/B415212C
Casting a new light on azide photochemistry: photolytic production of cyclic-N3
DOI: 10.1039/B704782G
Measurements of the material properties of metal nanoparticles by time-resolved spectroscopy
Gregory V. Hartland
DOI: 10.1039/B413368D
On the quantitative molecular analysis of electronic energy transfer within donor–acceptor pairs
Mikael Isaksson, Nils Norlin, Per-Olof Westlund, Lennart B.-Å. Johansson
DOI: 10.1039/B614817D
Modeling of dense ceramic bilayer membranes
Michael Schroeder
DOI: 10.1039/B405436A
您可能还喜欢
十二烷基磺酸钠(CAS号:2386-53-0)的主要用途是什么?
十二烷基磺酸钠主要用作表面活性剂,广泛应用于洗涤剂、肥皂、化妆品和工业清洁产品中。它能有效去除油脂和污垢,常用于制造洗发水、沐浴露、洗衣粉和金属清洗剂。此外,它...
5-羟基异喹啉(CAS号:2439-04-5)适用哪些法规指南?
5-羟基异喹啉作为化学品,主要适用的法规包括GHS全球化学品统一分类和标签制度,REACH法规等。GHS将5-羟基异喹啉分类为皮肤腐蚀/刺激类别2,严重眼损伤/...
在合成中是否有FIDAS-5 | Wnt(CAS号:1391934-98-7)的替代品?
合成中可以考虑使用类似结构的化合物,如4-[(E)-2-(2-氯-6-氟苯基)乙烯基]-N-甲基苯胺的类似物或衍生物作为替代品。这类化合物可能具有相似的生物活性...
(R)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate(CAS号:1370600-56-8)通常如何合成?
该化合物通常通过如下步骤合成:首先,将4-溴-1H-咪唑与对甲苯磺酸在乙酸乙酯中反应,得到中间体5-溴-1H-咪唑-2-甲酸乙酯。然后,该中间体与2-甲基-2-...
处理4-(吡咯烷-1-基)环己酮(CAS号:10421-18-8)时应注意哪些实验室安全事项?
处理4-(吡咯烷-1-基)环己酮时,应佩戴手套、护目镜和实验室外套,以防止直接接触或吸入。在通风橱中操作,确保良好的通风条件。一旦发生泄漏,应立即清理并使用适当...
如何处理含有异麦芽糖醇(CAS号:534-73-6)的废料?
含有异麦芽糖醇的废液应首先进行分类收集,避免与其他化学品混合。对于小规模的废液,可以通过焚烧或加入特定的化学试剂进行无害化处理。对于大规模的废液,建议联系专业的...
7-甲基壬酸(CAS号:41653-89-8)的主要用途是什么?
7-甲基壬酸主要用于有机合成领域,作为合成其他化合物的原料。此外,它还可能作为一种中间体用于药品制造和香料合成,但具体用途需要根据其具体的化学结构和反应特性来确...
N-甲氧基-N-甲基甲基吡啶羧酰胺(CAS号:148493-07-6)应用于哪些行业?
N-甲氧基-N-甲基甲基吡啶羧酰胺在医药领域有一定的应用,作为一种潜在的药物前体或中间体。此外,该化合物也可能应用于聚合物改性剂、传感器材料等。由于其独特的化学...
什么是惕各酸香叶酯(CAS号:7785-33-3)?
惕各酸香叶酯是一种化合物,化学名称为(2E)-3,7-二甲基-2,6-辛二烯-1-基(2E)-2-甲基-2-丁烯酸酯。它是一种具有香叶香气的化合物,分子式为C1...
1-环丁基哌嗪(CAS号:132800-13-6)安全吗?
1-环丁基哌嗪在适当的操作条件下是相对安全的,但如遇明火或高热会释放有毒气体。操作时应佩戴防护眼镜和手套,避免吸入或接触皮肤、眼睛。
来源期刊
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.










![N-[2-Bromo-4-(trifluoromethoxy)phenyl]formamide structure N-[2-Bromo-4-(trifluoromethoxy)phenyl]formamide structure](https://cnstatic.chemtradehub.com/structs/941/941294-53-7-f783.webp)



