Laser-induced fluorescence excitation and dispersed fluorescence spectroscopy of the Ã(1B1)–(1A1) transition of dichlorocarbene
文献信息
Joseph S. Guss, Craig A. Richmond, Klaas Nauta, Scott H. Kable
The Ã(1B1)–(1A1) transition of jet-cooled CCl2 has been investigated using both laser-induced fluorescence (LIF) excitation and dispersed fluorescence (DF) spectroscopy. DF spectra were taken from over 90 emitting vibronic states over the breadth of the LIF spectrum. 68 ground state vibrational levels were assigned in the C35Cl2 isotopomer and 47 in C35Cl37Cl. The ground state frequencies were fit to an anharmonic potential yielding: ω″1 = 736 cm−1, ω″2 = 338 cm−1, ν″3 = 760 cm−1, x″11 = −3.19 cm−1, x″22 = −0.29 cm−1, x″12 = −1.80 cm−1, x″13 = −5.70 cm−1 and x″23 = −3.80 cm−1. This is the first gas phase measurement of ν″3. Despite the close frequency match between ν″1 and 2ν″2 there was no evidence for Fermi resonance. The intensities of transitions in the DF spectra were analysed to identify the nature of the emitting state. Levels below T00 + 2500 cm−1 in the à state could be assigned simply as combinations and overtones of ν′1 and ν′2. Between T00 + 2500 and T00 + 5300 cm−1 the emission revealed an increasing mixing between levels within the same polyad, i.e., (m,n,0), (m + 1,n − 2,0), (m + 2,n − 4,0) etc, presumably due to Fermi resonance. This mixing becomes so extensive that simple assignment of the emitting states is not possible. Above T00 + 5300 cm−1 only K′ = 0 states could be identified, indicating that the Renner–Teller intersection between the and à states had been exceeded. This intersection is therefore 22 600 cm−1 above the ground state, in excellent agreement with a previous theoretical calculation of 23 000 cm−1.
相关文献
Atomic force microscopy in biomaterials surface science
DOI: 10.1039/C4CP04427D
Molecular dynamics simulation of planar elongational flow in a nematic liquid crystal based on the Gay–Berne potential
Sten Sarman, Aatto Laaksonen
DOI: 10.1039/C4CP04891A
Topological states modulation of Bi and Sb thin films by atomic adsorption
Hongmei Liu, Xiaoli Wang, Guangliang Cui, Pinhua Zhang, Dapeng Zhao, Shuaihua Ji
DOI: 10.1039/C4CP04502E
Probing a chemical compass: novel variants of low-frequency reaction yield detected magnetic resonance
Kiminori Maeda, Jonathan G. Storey, Paul A. Liddell, Devens Gust, P. J. Hore, C. J. Wedge, Christiane R. Timmel
DOI: 10.1039/C4CP04095C
Reducing optical losses in organic solar cells using microlens arrays: theoretical and experimental investigation of microlens dimensions
Yuqing Chen, Stephen Bergeson, Max Noack, Joong-Mok Park, Andrew C. Hillier
DOI: 10.1039/C4CP05221H
Chemistry in one dimension
Pierre-François Loos, Caleb J. Ball, Peter M. W. Gill
DOI: 10.1039/C4CP03571B
Splitting and joining in carbon nanotube/nanoribbon/nanotetrahedron growth
Takayuki Hasegawa, Hideo Kohno
DOI: 10.1039/C4CP05139D
Photocatalytic enhancement of hybrid C3N4/TiO2 prepared via ball milling method
Mo Zhang, Yongfa Zhu
DOI: 10.1039/C4CP05173D
Quantification of protein–materials interaction by soft colloidal probe spectroscopy
Steve Martin, Hanqing Wang, Laura Hartmann, Tilo Pompe, Stephan Schmidt
DOI: 10.1039/C4CP05484A
Cyano-substituted oligo(p-phenylene vinylene) single-crystal with balanced hole and electron injection and transport for ambipolar field-effect transistors
Jian Deng, Jia Tang, Yuanxiang Xu, Liqun Liu, Yan Wang, Zengqi Xie, Yuguang Ma
DOI: 10.1039/C4CP04265D
您可能还喜欢
6-氯-2H-1,4-苯并噁嗪-3(4H)-酮(CAS号:7652-29-1)应用于哪些行业?
6-氯-2H-1,4-苯并噁嗪-3(4H)-酮主要应用于医药、农药和聚合物等领域。在医药领域,该化合物可用于合成抗菌药物;在农药领域,可用作杀虫剂的中间体;在聚...
活性氧化铝(CAS号:1302-74-5)应用于哪些行业?
活性氧化铝广泛应用于医药、聚合物、传感器、半导体和催化等领域。在医药行业,活性氧化铝用作吸附剂和干燥剂,有助于去除杂质和水分。在聚合物行业,它用作增白剂和抗结块...
什么是硅胶(CAS号:112926-00-8)?
硅胶(Silica gel, pptd.,cryst.-free)是一种无定形、多孔的硅酸盐材料,主要成分为二氧化硅(SiO₂)。其结构由硅氧四面体构成,通过酸...
二乙基甲基一氢硅烷(CAS号:760-32-7)的主要用途是什么?
二乙基甲基一氢硅烷主要用于有机合成、表面处理以及作为溶剂。它还被用作合成其他硅烷化合物的原料,以及在涂料、粘合剂和密封剂中的应用。
在合成中是否有N-花生四烯酰基甘氨酸(CAS号:179113-91-8)的替代品?
在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如N-亚油酰基甘氨酸或N-花生二烯酰基甘氨酸。这些替代品在结构上有类似的双键位置,但可能具有不同的物理化...
在合成中是否有1-(4-甲氧基苯基)丙烷-1,2-二酮(CAS号:10557-27-4)的替代品?
在合成过程中,可以考虑使用类似结构的化合物作为替代品,例如1-(3-甲氧基苯基)丙烷-1,2-二酮或1-(4-羟基苯基)丙烷-1,2-二酮。这些替代品具有相似的...
N-(4-氨基-1-苄基-3-羟基-5-苯基戊基)-3-甲基-2-(2-氧代四氢嘧啶-1-基)-丁酰胺 5-氧代吡咯烷-2-甲酸(CAS号:192726-06-0)通常如何合成?
该化合物通常通过一系列复杂的有机合成步骤获得。首先,通过芳香族化合物的羟基化反应获得羟基化产物,然后通过酰化反应形成酰胺中间体,最后通过环化反应得到目标产物。常...
(S)-2-氨基-3-喹啉-2-丙酸(CAS号:161513-46-8)的市场或研究趋势如何?
该化合物作为生物活性化合物,尤其是在药物化学领域表现出色。近年来,随着对新型抗炎、抗病毒和抗癌药物的研究增加,其市场和研究趋势持续增长。此外,其在神经科学领域的...
核黄素磷酸钠(CAS号:130-40-5)安全吗?
核黄素磷酸钠在常规使用条件下安全,但高剂量可能引起刺激性反应。操作时需佩戴防护手套和护目镜,避免吸入粉尘。若接触皮肤或眼睛,应立即用大量清水冲洗。急救时需根据接...
盐酸丙胺卡因杂质A(EP) 标准品(CAS号:19281-31-3)通常如何合成?
盐酸丙胺卡因杂质A(EP) 标准品可通过重氮化反应和随后的酰胺化反应合成。首先,利用氯化反应将苯环上的氢原子转化为氯原子,然后通过芳香族重氮化反应引入氨基,最后...
来源期刊
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














